[Sun Jun 10 10:14:55 2012] Detection parameters:
  Position = (329.1, 322.9) = 0 43 20.52 -20 36 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.9 +/- 12.3
  Background counts = 14.2
  Rate = 0.005 +/- 0.0009

[Sun Jun 10 10:14:56 2012] Off-axis axis estimate = 2.84'
[Sun Jun 10 11:51:40 2012] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 11:51:40 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Sun Jun 10 11:51:40 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.753
[Sun Jun 10 11:51:40 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.85"
[Sun Jun 10 13:49:33 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jun 10 13:49:33 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jun 10 13:49:33 2012] Fit fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src12 appears to have run properly
[Sun Jun 10 13:49:34 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jun 10 13:49:34 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jun 10 13:49:34 2012] Fit fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Jun 10 15:46:00 2012] Source 25 is offset by 7.274716 and 3.823103 pixels which is larger than
2 X fitted extent = 7.217701 x 7.217701, not incorporating fit results
[Sun Jun 10 15:46:00 2012] Source 25 is offset by 0.508693 and 5.120735 pixels which is larger than
2 X fitted extent = 0.899430 x 0.899430, not incorporating fit results
[Sun Jun 10 15:46:00 2012] Spatial fit model total counts = 316.034000, observed total counts = 302.000000
[Sun Jun 10 15:46:00 2012] Offset between fit and detection position for source 25 = 2.176503 pixels
[Sun Jun 10 15:46:00 2012] Warning, changing simple spatial fit ID from 12 to 19
[Sun Jun 10 15:46:00 2012] 306.640200 total counts/ 209.685000 bgd. counts: snr = 6.695568
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.176503 pixels
  Position = (330.6, 324.5) = 0 43 20.05 -20 36 31.5
  Extent = 16.2 (16.2-32.5)", rotation angle = 0
  Source counts = 97.0 +/- 17.5
  Background counts = 209.7
  Rate = 0.007 +/- 0.001
[Sun Jun 10 15:46:00 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 15:46:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 15:46:00 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 15:46:00 2012] Source does appear to be extended
[Sun Jun 10 15:46:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 15:46:00 2012] Source is confused with source 23
[Sun Jun 10 17:04:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:04:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 10 17:04:25 2012] Initial guess for spatial extent in simple fitting = 16.24"
[Sun Jun 10 17:04:25 2012] source mask rpix=3.7, npix_max = 71, mask sum = 63, frac = 0.878
[Sun Jun 10 17:04:25 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 16.24"
[Sun Jun 10 18:42:09 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src12.ximg exists
[Sun Jun 10 18:42:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src12.csv
[Sun Jun 10 18:42:09 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Jun 10 18:42:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src12.csv
[Sun Jun 10 18:42:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Jun 10 18:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Jun 10 18:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sun Jun 10 18:42:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes