[Sun Jun 10 10:14:55 2012] Detection parameters:
  Position = (309.1, 329.8) = 0 43 26.70 -20 36 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.6 +/- 12.0
  Background counts = 11.4
  Rate = 0.006 +/- 0.0009

[Sun Jun 10 10:14:56 2012] Off-axis axis estimate = 2.40'
[Sun Jun 10 11:51:40 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 11:51:40 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Sun Jun 10 11:51:40 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.787
[Sun Jun 10 11:51:40 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.63"
[Sun Jun 10 13:49:33 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun 10 13:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src11.csv
[Sun Jun 10 13:49:33 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun 10 13:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src11.csv
[Sun Jun 10 13:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 13:49:34 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun 10 13:49:34 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun 10 13:49:34 2012] Fit fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Jun 10 15:46:00 2012] Warning, spatial fit 11 centroid is now closest to src. 17
[Sun Jun 10 15:46:00 2012] Spatial fit model total counts = 423.231000, observed total counts = 425.000000
[Sun Jun 10 15:46:00 2012] Offset between fit and detection position for source 22 = 6.887294 pixels
[Sun Jun 10 15:46:00 2012] Warning, changing simple spatial fit ID from 11 to 18
[Sun Jun 10 15:46:00 2012] 411.230600 total counts/ 347.289000 bgd. counts: snr = 3.431136
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 6.887294 pixels
  Position = (307.6, 323.1) = 0 43 27.16 -20 36 37.5
  Extent = 15.1 (15.0-30.1)", rotation angle = 0
  Source counts = 63.9 +/- 20.3
  Background counts = 347.3
  Rate = 0.004 +/- 0.001
[Sun Jun 10 15:46:00 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 15:46:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 15:46:00 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 15:46:00 2012] Source does appear to be extended
[Sun Jun 10 15:46:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 15:46:00 2012] Source is confused with source 8
[Sun Jun 10 15:46:00 2012] Source is confused with source 24
[Sun Jun 10 17:04:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:04:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 10 17:04:25 2012] Initial guess for spatial extent in simple fitting = 15.07"
[Sun Jun 10 17:04:25 2012] source mask rpix=3.5, npix_max = 62, mask sum = 64, frac = 1.018
[Sun Jun 10 17:04:25 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 15.07"
[Sun Jun 10 18:42:09 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun 10 18:42:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src11.csv
[Sun Jun 10 18:42:09 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun 10 18:42:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src11.csv
[Sun Jun 10 18:42:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun 10 18:42:10 2012] Fit fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly