[Sun Jun 10 10:14:55 2012] Detection parameters:
  Position = (498.0, 331.9) = 0 42 28.17 -20 35 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.9 +/- 7.7
  Background counts = 4.4
  Rate = 0.002 +/- 0.0005

[Sun Jun 10 10:14:56 2012] Off-axis axis estimate = 14.67'
[Sun Jun 10 11:51:40 2012] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 11:51:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 10 11:51:40 2012] Initial guess for spatial extent in simple fitting = 13.76"
[Sun Jun 10 11:51:40 2012] source mask rpix=3.2, npix_max = 53, mask sum = 64, frac = 1.192
[Sun Jun 10 11:51:40 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 13.76"
[Sun Jun 10 13:49:34 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src38.ximg exists
[Sun Jun 10 13:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src38.csv
[Sun Jun 10 13:49:34 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun Jun 10 13:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src38.csv
[Sun Jun 10 13:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 13:49:35 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun Jun 10 13:49:35 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun Jun 10 13:49:35 2012] Fit fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sun Jun 10 15:46:00 2012] Spatial fit model total counts = 89.854600, observed total counts = 90.000000
[Sun Jun 10 15:46:00 2012] Offset between fit and detection position for source 21 = 0.918193 pixels
[Sun Jun 10 15:46:00 2012] 88.427000 total counts/ 49.983500 bgd. counts: snr = 5.437629
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.918193 pixels
  Position = (498.3, 332.8) = 0 42 28.08 -20 35 54.6
  Extent = 11.2 (3.6-18.9)", rotation angle = 0
  Source counts = 38.4 +/- 9.4
  Background counts = 50.0
  Rate = 0.003 +/- 0.0007
[Sun Jun 10 15:46:00 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 15:46:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 15:46:00 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 15:46:00 2012] Source does appear to be extended
[Sun Jun 10 15:46:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 17:04:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:04:25 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Sun Jun 10 17:04:25 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.949
[Sun Jun 10 17:04:25 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 11.22"
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src32.ximg exists
[Sun Jun 10 18:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src32.csv
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src32_1.ximg exists
[Sun Jun 10 18:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src32.csv
[Sun Jun 10 18:42:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sun Jun 10 18:42:10 2012] Fit fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly