[Sun Jun 10 10:14:54 2012] Detection parameters:
  Position = (400.0, 347.9) = 0 42 58.54 -20 34 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.6 +/- 8.8
  Background counts = 7.6
  Rate = 0.004 +/- 0.0008

[Sun Jun 10 10:14:56 2012] Off-axis axis estimate = 8.19'
[Sun Jun 10 11:51:40 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 11:51:40 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Sun Jun 10 11:51:40 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.056
[Sun Jun 10 11:51:40 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 10.52"
[Sun Jun 10 13:49:33 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src16.ximg exists
[Sun Jun 10 13:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src16.csv
[Sun Jun 10 13:49:33 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Jun 10 13:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src16.csv
[Sun Jun 10 13:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 13:49:34 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Jun 10 13:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Jun 10 13:49:34 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Jun 10 13:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Jun 10 13:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 15:46:00 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 14.478925 pixels away
[Sun Jun 10 15:46:00 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 15:46:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 15:46:00 2012] Assessing source extent using major
[Sun Jun 10 15:46:00 2012] Source does appear to be extended
[Sun Jun 10 15:46:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 17:04:25 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:04:25 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Sun Jun 10 17:04:25 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.056
[Sun Jun 10 17:04:25 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 10.52"
[Sun Jun 10 18:42:09 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src16.ximg exists
[Sun Jun 10 18:42:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src16.csv
[Sun Jun 10 18:42:09 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun Jun 10 18:42:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src16.csv
[Sun Jun 10 18:42:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun Jun 10 18:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Jun 10 18:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun Jun 10 18:42:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes