[Sun Jun 10 10:14:54 2012] Detection parameters:
  Position = (310.3, 498.7) = 0 43 26.33 -20 23 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.5 +/- 10.4
  Background counts = 3.5
  Rate = 0.005 +/- 0.0007

[Sun Jun 10 10:14:56 2012] Off-axis axis estimate = 14.55'
[Sun Jun 10 11:51:40 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 11:51:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 10 11:51:40 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Sun Jun 10 11:51:40 2012] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.920
[Sun Jun 10 11:51:40 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.70"
[Sun Jun 10 13:49:33 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src13.ximg exists
[Sun Jun 10 13:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src13.csv
[Sun Jun 10 13:49:33 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Jun 10 13:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src13.csv
[Sun Jun 10 13:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 13:49:34 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Jun 10 13:49:34 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Jun 10 13:49:34 2012] Fit fullrun_mos1_xmm0042340201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Jun 10 15:46:00 2012] Spatial fit model total counts = 114.793000, observed total counts = 113.000000
[Sun Jun 10 15:46:00 2012] Offset between fit and detection position for source 12 = 0.375084 pixels
[Sun Jun 10 15:46:00 2012] 113.589600 total counts/ 73.963400 bgd. counts: snr = 4.607592
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.375084 pixels
  Position = (310.0, 498.5) = 0 43 26.44 -20 23 54.2
  Extent = 5.0 (3.6-9.4)", rotation angle = 0
  Source counts = 39.6 +/- 10.7
  Background counts = 74.0
  Rate = 0.003 +/- 0.0007
[Sun Jun 10 15:46:00 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 15:46:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 15:46:00 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 15:46:00 2012] Source does appear to be extended
[Sun Jun 10 15:46:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 17:04:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:04:25 2012] Initial guess for spatial extent in simple fitting = 4.96"
[Sun Jun 10 17:04:25 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.115
[Sun Jun 10 17:04:25 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 4.96"
[Sun Jun 10 18:42:09 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src13.ximg exists
[Sun Jun 10 18:42:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src13.csv
[Sun Jun 10 18:42:09 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Jun 10 18:42:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src13.csv
[Sun Jun 10 18:42:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Jun 10 18:42:10 2012] fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Jun 10 18:42:10 2012] Fit fullrun_mos1_xmm0042340201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly