[Mon Sep  3 05:10:32 2012] Detection parameters:
  Position = (300.8, 288.0) = 0 14 11.85 -30 22 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.8 +/- 24.4
  Background counts = 61.0
  Rate = 0.03 +/- 0.002

[Mon Sep  3 05:10:33 2012] Off-axis axis estimate = 0.78'
[Mon Sep  3 05:12:20 2012] Using EEF radius (= 6.82 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 05:12:20 2012] Initial guess for spatial extent in simple fitting = 6.82"
[Mon Sep  3 05:12:20 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.936
[Mon Sep  3 05:12:20 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 6.82"
[Mon Sep  3 06:54:23 2012] fullrun_pn_xmm0042340101_pi300-10000_cl_pass0_src10.ximg exists
[Mon Sep  3 06:54:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340101_pi300-10000_cl_pass0_src10.csv
[Mon Sep  3 06:54:23 2012] fullrun_pn_xmm0042340101_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Sep  3 06:54:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340101_pi300-10000_cl_pass0_src10.csv
[Mon Sep  3 06:54:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 06:54:24 2012] fullrun_pn_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Sep  3 06:54:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Sep  3 06:54:24 2012] fullrun_pn_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Sep  3 06:54:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Sep  3 06:54:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:43:57 2012] Source 11 is offset by -0.972635 and -3.769938 pixels which is larger than
2 X fitted extent = 0.780975 x 0.780975, not incorporating fit results
[Mon Sep  3 10:43:57 2012] Spatial fit model total counts = 1985.170000, observed total counts = 1979.000000
[Mon Sep  3 10:43:57 2012] Offset between fit and detection position for source 11 = 0.196525 pixels
[Mon Sep  3 10:43:57 2012] Warning, changing simple spatial fit ID from 10 to 9
[Mon Sep  3 10:43:57 2012] 1875.571500 total counts/ 1855.490000 bgd. counts: snr = 0.466194
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.196525 pixels
  Position = (300.9, 288.2) = 0 14 11.83 -30 22 30.1
  Extent = 2.6 (1.7-4.4)", rotation angle = 0
  Source counts = 20.1 +/- 43.3
  Background counts = 1855.5
  Rate = 0.002 +/- 0.004
  Deleting source due to low Poisson probability