[Mon Sep  3 05:11:25 2012] Detection parameters:
  Position = (259.3, 259.8) = 0 14 25.79 -30 24 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.2 +/- 12.5
  Background counts = 28.7
  Rate = 0.004 +/- 0.0008

[Mon Sep  3 05:11:25 2012] Off-axis axis estimate = 3.99'
[Mon Sep  3 08:38:12 2012] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 08:38:12 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Mon Sep  3 08:38:12 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.053
[Mon Sep  3 08:38:12 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.42"
[Mon Sep  3 10:43:41 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src35.ximg exists
[Mon Sep  3 10:43:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src35.csv
[Mon Sep  3 10:43:41 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src35_1.ximg exists
[Mon Sep  3 10:43:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src35.csv
[Mon Sep  3 10:43:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:43:42 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Mon Sep  3 10:43:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Mon Sep  3 10:43:42 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Mon Sep  3 10:43:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Mon Sep  3 10:43:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:44:21 2012] Spatial fit model total counts = 422.983000, observed total counts = 381.000000
[Mon Sep  3 10:44:21 2012] Poor agreement between spatial fit and data for source 54
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 10:44:21 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 10:44:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 10:44:21 2012] Assessing source extent using major
[Mon Sep  3 10:44:21 2012] Source does appear to be extended
[Mon Sep  3 10:44:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 14:51:27 2012] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 14:51:27 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Mon Sep  3 14:51:27 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.053
[Mon Sep  3 14:51:27 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 8.42"
[Mon Sep  3 17:04:17 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src30.ximg exists
[Mon Sep  3 17:04:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src30.csv
[Mon Sep  3 17:04:17 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src30_1.ximg exists
[Mon Sep  3 17:04:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src30.csv
[Mon Sep  3 17:04:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 17:04:18 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Mon Sep  3 17:04:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Mon Sep  3 17:04:18 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Mon Sep  3 17:04:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Mon Sep  3 17:04:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 17:04:47 2012] Source 54 is offset by 6.739417 and 5.255296 pixels which is larger than
2 X fitted extent = 3.372267 x 3.372267, not incorporating fit results
[Mon Sep  3 17:04:47 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 17:04:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 17:04:47 2012] Assessing source extent using major
[Mon Sep  3 17:04:47 2012] Source does appear to be extended
[Mon Sep  3 17:04:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 17:04:47 2012] Source is confused with source 3
[Mon Sep  3 17:34:26 2012] XMMSAS src. selection expression = ellipse(22512.035309, 22555.516724, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Sep  3 17:34:26 2012] Writing source region out to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src54_src.reg
[Mon Sep  3 17:34:26 2012] Extracting stamp from image fullrun_mos2_xmm0042340101_pi300-10000_cl_sm2.00.img.gz, (222, 222) - (297, 297)
[Mon Sep  3 17:34:26 2012] XMMSAS bgd. selection expression = annulus(22512.035309, 22555.516724, 1087.500000, 2175.000000, X, Y) && !ellipse(24299.746480, 23686.676000, 2387.080069, 2387.080069, 0.000000, X, Y) && !ellipse(24232.630000, 24233.388000, 3612.024104, 3612.024104, 0.000000, X, Y) && !ellipse(23955.676000, 23562.532000, 859.024025, 859.024025, 0.000000, X, Y) && !ellipse(22333.213776, 23639.416504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23583.822845, 24651.609253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24941.080000, 24454.872000, 1110.208032, 1110.208032, 0.000000, X, Y) && !ellipse(23560.025818, 24055.334808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25385.620000, 25062.964000, 2220.176064, 2220.176064, 0.000000, X, Y) && !ellipse(21125.602600, 24865.000400, 383.410411, 383.410411, 0.000000, X, Y) && !ellipse(22918.692871, 24773.307831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23052.737335, 23699.205109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24903.698200, 22026.354000, 1264.296036, 1264.296036, 0.000000, X, Y) && !ellipse(25746.222000, 25567.118000, 2272.864065, 2272.864065, 0.000000, X, Y) && !ellipse(23305.370000, 21566.040000, 1315.816038, 1315.816038, 0.000000, X, Y) && !ellipse(22278.151123, 25095.102692, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep  3 17:34:26 2012] Writing fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src54.gif
[Mon Sep  3 17:54:39 2012] Mean detx,y = (10.24, 2880.20) 
[Mon Sep  3 17:54:40 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 17:54:46 2012] grppha failed
[Mon Sep  3 17:54:46 2012] Setting source spectrum file to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src54_src.pi.gz
[Mon Sep  3 17:54:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Mon Sep  3 17:56:36 2012] Not generating rmf since there are only 67 counts
[Mon Sep  3 17:56:36 2012] rmf not generated due to insufficient counts
[Mon Sep  3 17:56:55 2012] Updating aperture counts using extracted products
[Mon Sep  3 17:56:55 2012] Error reading totcts from fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src54_src.pi.gz
[Mon Sep  3 17:56:55 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 17:56:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Sep  3 17:56:58 2012] xmm0042340101/analysis//spectral/fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete