[Mon Sep  3 05:11:24 2012] Detection parameters:
  Position = (321.7, 291.1) = 0 14 4.81 -30 22 17.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.6 +/- 13.5
  Background counts = 20.3
  Rate = 0.005 +/- 0.0009

[Mon Sep  3 05:11:25 2012] Off-axis axis estimate = 1.77'
[Mon Sep  3 08:38:12 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 08:38:12 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Mon Sep  3 08:38:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Mon Sep  3 08:38:12 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.31"
[Mon Sep  3 10:43:41 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src30.ximg exists
[Mon Sep  3 10:43:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src30.csv
[Mon Sep  3 10:43:41 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon Sep  3 10:43:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src30.csv
[Mon Sep  3 10:43:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:43:42 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon Sep  3 10:43:42 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Sep  3 10:43:42 2012] Fit fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Mon Sep  3 10:44:21 2012] Spatial fit model total counts = 861.430000, observed total counts = 860.000000
[Mon Sep  3 10:44:21 2012] Offset between fit and detection position for source 44 = 7.950560 pixels
[Mon Sep  3 10:44:21 2012] 814.737900 total counts/ 759.386000 bgd. counts: snr = 2.008636
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 7.950560 pixels
  Position = (327.7, 285.9) = 0 14 2.79 -30 22 40.1
  Extent = 14.6 (14.6-29.3)", rotation angle = 0
  Source counts = 55.4 +/- 28.5
  Background counts = 759.4
  Rate = 0.003 +/- 0.002
[Mon Sep  3 10:44:21 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 10:44:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 10:44:21 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 10:44:21 2012] Source does appear to be extended
[Mon Sep  3 10:44:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 14:51:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 14:51:27 2012] Initial guess for spatial extent in simple fitting = 14.63"
[Mon Sep  3 14:51:27 2012] source mask rpix=3.4, npix_max = 59, mask sum = 64, frac = 1.072
[Mon Sep  3 14:51:27 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 14.63"
[Mon Sep  3 17:04:16 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src26.ximg exists
[Mon Sep  3 17:04:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src26.csv
[Mon Sep  3 17:04:16 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Sep  3 17:04:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src26.csv
[Mon Sep  3 17:04:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 17:04:17 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Sep  3 17:04:18 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Sep  3 17:04:18 2012] Fit fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Sep  3 17:04:47 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 14.643294 pixels away
[Mon Sep  3 17:04:47 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 17:04:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 17:04:47 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 17:04:47 2012] Source does appear to be extended
[Mon Sep  3 17:04:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 17:34:26 2012] XMMSAS src. selection expression = ellipse(28463.622000, 24821.444000, 877.680025, 877.680025, 0.000000, X, Y)
[Mon Sep  3 17:34:26 2012] Writing source region out to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src44_src.reg
[Mon Sep  3 17:34:26 2012] Extracting stamp from image fullrun_mos2_xmm0042340101_pi300-10000_cl_sm2.00.img.gz, (277, 235) - (378, 336)
[Mon Sep  3 17:34:26 2012] XMMSAS bgd. selection expression = annulus(28463.622000, 24821.444000, 1462.800042, 2925.600084, X, Y) && !ellipse(24299.746480, 23686.676000, 2387.080069, 2387.080069, 0.000000, X, Y) && !ellipse(31384.178600, 22076.184400, 495.510414, 495.510414, 0.000000, X, Y) && !ellipse(24232.630000, 24233.388000, 3612.024104, 3612.024104, 0.000000, X, Y) && !ellipse(27079.314000, 25705.054000, 1436.704041, 1436.704041, 0.000000, X, Y) && !ellipse(24941.080000, 24454.872000, 1110.208032, 1110.208032, 0.000000, X, Y) && !ellipse(25608.333130, 23950.495667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28024.348000, 21963.410800, 336.299579, 336.299579, 0.000000, X, Y) && !ellipse(25385.620000, 25062.964000, 2220.176064, 2220.176064, 0.000000, X, Y) && !ellipse(26687.160000, 25556.160000, 964.824028, 964.824028, 0.000000, X, Y) && !ellipse(26154.262909, 24912.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24903.698200, 22026.354000, 1264.296036, 1264.296036, 0.000000, X, Y) && !ellipse(25746.222000, 25567.118000, 2272.864065, 2272.864065, 0.000000, X, Y) && !ellipse(32233.839264, 26662.886871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27052.095581, 24070.367584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26245.728668, 24133.509491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27002.475340, 23652.766000, 1162.480033, 1162.480033, 0.000000, X, Y)
[Mon Sep  3 17:34:26 2012] Writing fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src44.gif
[Mon Sep  3 17:52:53 2012] Mean detx,y = (3754.88, -1924.83) 
[Mon Sep  3 17:52:54 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 17:53:18 2012] grppha failed
[Mon Sep  3 17:53:18 2012] Setting source spectrum file to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src44_src.pi.gz
[Mon Sep  3 17:53:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Mon Sep  3 17:56:36 2012] Not generating rmf since there are only 55 counts
[Mon Sep  3 17:56:36 2012] rmf not generated due to insufficient counts
[Mon Sep  3 17:56:55 2012] Updating aperture counts using extracted products
[Mon Sep  3 17:56:55 2012] Error reading totcts from fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src44_src.pi.gz
[Mon Sep  3 17:56:55 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 17:56:57 2012] Source 44 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep  3 17:56:58 2012] xmm0042340101/analysis//spectral/fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete