[Mon Sep  3 05:11:24 2012] Detection parameters:
  Position = (287.5, 296.9) = 0 14 16.30 -30 21 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.1 +/- 14.1
  Background counts = 36.9
  Rate = 0.004 +/- 0.0008

[Mon Sep  3 05:11:25 2012] Off-axis axis estimate = 0.80'
[Mon Sep  3 08:38:12 2012] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 08:38:12 2012] Initial guess for spatial extent in simple fitting = 6.83"
[Mon Sep  3 08:38:12 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.167
[Mon Sep  3 08:38:12 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 6.83"
[Mon Sep  3 10:43:41 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src39.ximg exists
[Mon Sep  3 10:43:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src39.csv
[Mon Sep  3 10:43:41 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src39_1.ximg exists
[Mon Sep  3 10:43:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src39.csv
[Mon Sep  3 10:43:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:43:42 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Mon Sep  3 10:43:42 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Mon Sep  3 10:43:42 2012] Fit fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Mon Sep  3 10:44:21 2012] Spatial fit model total counts = 1119.620000, observed total counts = 1061.000000
[Mon Sep  3 10:44:21 2012] Offset between fit and detection position for source 42 = 1.188367 pixels
[Mon Sep  3 10:44:21 2012] Warning, changing simple spatial fit ID from 39 to 27
[Mon Sep  3 10:44:21 2012] 1057.165100 total counts/ 1043.640000 bgd. counts: snr = 0.418664
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 1.188367 pixels
  Position = (287.7, 298.1) = 0 14 16.25 -30 21 46.9
  Extent = 3.6 (1.8-8.8)", rotation angle = 0
  Source counts = 13.5 +/- 32.5
  Background counts = 1043.6
  Rate = 0.0008 +/- 0.002
  Deleting source due to low Poisson probability