[Mon Sep  3 05:11:24 2012] Detection parameters:
  Position = (278.7, 299.5) = 0 14 19.27 -30 21 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.5 +/- 15.3
  Background counts = 36.0
  Rate = 0.006 +/- 0.001

[Mon Sep  3 05:11:25 2012] Off-axis axis estimate = 1.43'
[Mon Sep  3 08:38:12 2012] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 08:38:12 2012] Initial guess for spatial extent in simple fitting = 7.15"
[Mon Sep  3 08:38:12 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.871
[Mon Sep  3 08:38:12 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.15"
[Mon Sep  3 10:43:40 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src23.ximg exists
[Mon Sep  3 10:43:40 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon Sep  3 10:43:40 2012] Fit fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src23 appears to have run properly
[Mon Sep  3 10:43:42 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon Sep  3 10:43:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Mon Sep  3 10:43:42 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Sep  3 10:43:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Mon Sep  3 10:43:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:44:21 2012] Warning, spatial fit 23 centroid is now closest to src. 23
[Mon Sep  3 10:44:21 2012] Source 21 is offset by -3.197973 and 3.528939 pixels which is larger than
2 X fitted extent = 1.222262 x 1.222262, not incorporating fit results
[Mon Sep  3 10:44:21 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 10:44:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 10:44:21 2012] Assessing source extent using major
[Mon Sep  3 10:44:21 2012] Source does appear to be extended
[Mon Sep  3 10:44:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 10:44:21 2012] Source is confused with source 24
[Mon Sep  3 10:44:21 2012] Source is confused with source 41
[Mon Sep  3 14:51:27 2012] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 14:51:27 2012] Initial guess for spatial extent in simple fitting = 7.15"
[Mon Sep  3 14:51:27 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.871
[Mon Sep  3 14:51:27 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 7.15"
[Mon Sep  3 17:04:16 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src22.ximg exists
[Mon Sep  3 17:04:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src22.csv
[Mon Sep  3 17:04:16 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon Sep  3 17:04:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src22.csv
[Mon Sep  3 17:04:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 17:04:17 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon Sep  3 17:04:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon Sep  3 17:04:17 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Sep  3 17:04:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon Sep  3 17:04:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 17:04:47 2012] Spatial fit model total counts = 903.202000, observed total counts = 768.000000
[Mon Sep  3 17:04:47 2012] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 17:04:47 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 17:04:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 17:04:47 2012] Assessing source extent using major
[Mon Sep  3 17:04:47 2012] Source does appear to be extended
[Mon Sep  3 17:04:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 17:34:26 2012] XMMSAS src. selection expression = ellipse(24198.106354, 26006.595490, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Sep  3 17:34:26 2012] Writing source region out to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src21_src.reg
[Mon Sep  3 17:34:26 2012] Extracting stamp from image fullrun_mos2_xmm0042340101_pi300-10000_cl_sm2.00.img.gz, (241, 262) - (316, 337)
[Mon Sep  3 17:34:26 2012] XMMSAS bgd. selection expression = annulus(24198.106354, 26006.595490, 1087.500000, 2175.000000, X, Y) && !ellipse(24299.746480, 23686.676000, 2387.080069, 2387.080069, 0.000000, X, Y) && !ellipse(24232.630000, 24233.388000, 3612.024104, 3612.024104, 0.000000, X, Y) && !ellipse(23955.676000, 23562.532000, 859.024025, 859.024025, 0.000000, X, Y) && !ellipse(27079.314000, 25705.054000, 1436.704041, 1436.704041, 0.000000, X, Y) && !ellipse(22333.213776, 23639.416504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23583.822845, 24651.609253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24941.080000, 24454.872000, 1110.208032, 1110.208032, 0.000000, X, Y) && !ellipse(23560.025818, 24055.334808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25608.333130, 23950.495667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25385.620000, 25062.964000, 2220.176064, 2220.176064, 0.000000, X, Y) && !ellipse(26687.160000, 25556.160000, 964.824028, 964.824028, 0.000000, X, Y) && !ellipse(22918.692871, 24773.307831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26154.262909, 24912.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23052.737335, 23699.205109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23449.265961, 25630.738922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25746.222000, 25567.118000, 2272.864065, 2272.864065, 0.000000, X, Y) && !ellipse(27052.095581, 24070.367584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26245.728668, 24133.509491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27002.475340, 23652.766000, 1162.480033, 1162.480033, 0.000000, X, Y) && !ellipse(22278.151123, 25095.102692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22667.543030, 25731.287537, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep  3 17:34:26 2012] Writing fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src21.gif
[Mon Sep  3 17:52:13 2012] Mean detx,y = (-267.71, -776.50) 
[Mon Sep  3 17:52:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 17:52:25 2012] grppha failed
[Mon Sep  3 17:52:25 2012] Setting source spectrum file to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src21_src.pi.gz
[Mon Sep  3 17:52:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Sep  3 17:56:36 2012] Not generating rmf since there are only 90 counts
[Mon Sep  3 17:56:36 2012] rmf not generated due to insufficient counts
[Mon Sep  3 17:56:55 2012] Updating aperture counts using extracted products
[Mon Sep  3 17:56:55 2012] Error reading totcts from fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src21_src.pi.gz
[Mon Sep  3 17:56:55 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 17:56:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Sep  3 17:56:58 2012] xmm0042340101/analysis//spectral/fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete