[Mon Sep  3 05:11:24 2012] Detection parameters:
  Position = (368.4, 385.1) = 0 13 49.17 -30 15 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.5 +/- 16.8
  Background counts = 5.8
  Rate = 0.02 +/- 0.002

[Mon Sep  3 05:11:25 2012] Off-axis axis estimate = 8.07'
[Mon Sep  3 08:38:12 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 08:38:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 08:38:12 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Mon Sep  3 08:38:12 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066
[Mon Sep  3 08:38:12 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.46"
[Mon Sep  3 10:43:40 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src5.ximg exists
[Mon Sep  3 10:43:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src5.csv
[Mon Sep  3 10:43:40 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Sep  3 10:43:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src5.csv
[Mon Sep  3 10:43:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:43:41 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Sep  3 10:43:41 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Sep  3 10:43:41 2012] Fit fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Sep  3 10:44:21 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 14.516856 pixels away
[Mon Sep  3 10:44:21 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 10:44:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 10:44:21 2012] Assessing source extent using major
[Mon Sep  3 10:44:21 2012] Source does appear to be extended
[Mon Sep  3 10:44:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 14:51:27 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 14:51:27 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Mon Sep  3 14:51:27 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066
[Mon Sep  3 14:51:27 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.46"
[Mon Sep  3 17:04:16 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src5.ximg exists
[Mon Sep  3 17:04:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src5.csv
[Mon Sep  3 17:04:16 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Sep  3 17:04:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src5.csv
[Mon Sep  3 17:04:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 17:04:17 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Sep  3 17:04:17 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Sep  3 17:04:17 2012] Fit fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Sep  3 17:04:47 2012] Spatial fit model total counts = 237.000000, observed total counts = 237.000000
[Mon Sep  3 17:04:47 2012] Offset between fit and detection position for source 20 = 0.165210 pixels
[Mon Sep  3 17:04:47 2012] 238.606000 total counts/ 106.767000 bgd. counts: snr = 12.759257
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.165210 pixels
  Position = (368.2, 385.1) = 0 13 49.22 -30 15 28.4
  Extent = 5.5 (4.6-6.6)", rotation angle = 0
  Source counts = 131.8 +/- 15.4
  Background counts = 106.8
  Rate = 0.007 +/- 0.0009
[Mon Sep  3 17:04:47 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 17:04:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 17:04:47 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 17:04:47 2012] Source does appear to be extended
[Mon Sep  3 17:04:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 17:34:25 2012] XMMSAS src. selection expression = ellipse(31983.767400, 33453.758400, 327.315609, 327.315609, 0.000000, X, Y)
[Mon Sep  3 17:34:25 2012] Writing source region out to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src20_src.reg
[Mon Sep  3 17:34:25 2012] Extracting stamp from image fullrun_mos2_xmm0042340101_pi300-10000_cl_sm2.00.img.gz, (349, 366) - (387, 404)
[Mon Sep  3 17:34:25 2012] XMMSAS bgd. selection expression = annulus(31983.767400, 33453.758400, 545.526016, 1091.052031, X, Y)
[Mon Sep  3 17:34:25 2012] Writing fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src20.gif
[Mon Sep  3 17:48:22 2012] Mean detx,y = (2577.53, -11203.64) 
[Mon Sep  3 17:48:23 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 17:48:30 2012] grppha failed
[Mon Sep  3 17:48:30 2012] Setting source spectrum file to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src20_src.pi.gz
[Mon Sep  3 17:48:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Sep  3 17:56:54 2012] Updating aperture counts using extracted products
[Mon Sep  3 17:56:54 2012] Error reading totcts from fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src20_src.pi.gz
[Mon Sep  3 17:56:55 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 17:56:57 2012] Source 20 has no response, skipping
[Mon Sep  3 17:56:58 2012] xmm0042340101/analysis//spectral/fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete