[Mon Sep  3 05:11:24 2012] Detection parameters:
  Position = (311.0, 289.2) = 0 14 8.43 -30 22 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.7 +/- 17.9
  Background counts = 26.8
  Rate = 0.009 +/- 0.001

[Mon Sep  3 05:11:25 2012] Off-axis axis estimate = 1.13'
[Mon Sep  3 08:38:12 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 08:38:12 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Mon Sep  3 08:38:12 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.901
[Mon Sep  3 08:38:12 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 6.99"
[Mon Sep  3 10:43:40 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src15.ximg exists
[Mon Sep  3 10:43:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src15.csv
[Mon Sep  3 10:43:40 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Sep  3 10:43:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src15.csv
[Mon Sep  3 10:43:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:43:41 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Sep  3 10:43:41 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Sep  3 10:43:41 2012] Fit fullrun_mos2_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Sep  3 10:44:21 2012] Warning, spatial fit 15 centroid is now closest to src. 27
[Mon Sep  3 10:44:21 2012] Spatial fit model total counts = 1073.500000, observed total counts = 1074.000000
[Mon Sep  3 10:44:21 2012] Offset between fit and detection position for source 10 = 6.290268 pixels
[Mon Sep  3 10:44:21 2012] Warning, changing simple spatial fit ID from 15 to 20
[Mon Sep  3 10:44:21 2012] 1034.410400 total counts/ 960.551000 bgd. counts: snr = 2.383118
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 6.290268 pixels
  Position = (307.3, 294.3) = 0 14 9.66 -30 22 3.4
  Extent = 11.4 (6.7-13.7)", rotation angle = 0
  Source counts = 73.9 +/- 32.2
  Background counts = 960.6
  Rate = 0.004 +/- 0.002
[Mon Sep  3 10:44:21 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 10:44:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 10:44:21 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 10:44:21 2012] Source does appear to be extended
[Mon Sep  3 10:44:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 10:44:21 2012] Source is confused with source 6
[Mon Sep  3 14:51:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 14:51:27 2012] Initial guess for spatial extent in simple fitting = 11.36"
[Mon Sep  3 14:51:27 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.929
[Mon Sep  3 14:51:27 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 11.36"
[Mon Sep  3 17:04:16 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src14.ximg exists
[Mon Sep  3 17:04:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src14.csv
[Mon Sep  3 17:04:16 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Sep  3 17:04:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src14.csv
[Mon Sep  3 17:04:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 17:04:17 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Sep  3 17:04:17 2012] fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Sep  3 17:04:17 2012] Fit fullrun_mos2_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Mon Sep  3 17:04:47 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.245163 pixels away
[Mon Sep  3 17:04:47 2012] Spatial fit model total counts = 1073.260000, observed total counts = 1074.000000
[Mon Sep  3 17:04:47 2012] Offset between fit and detection position for source 10 = 0.000000 pixels
[Mon Sep  3 17:04:47 2012] Warning, changing simple spatial fit ID from 14 to 19
[Mon Sep  3 17:04:47 2012] 1026.307500 total counts/ 944.566000 bgd. counts: snr = 2.659662
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.000000 pixels
  Position = (307.3, 294.3) = 0 14 9.66 -30 22 3.4
  Extent = 12.1 (8.8-13.7)", rotation angle = 0
  Source counts = 81.7 +/- 32.0
  Background counts = 944.6
  Rate = 0.005 +/- 0.002
[Mon Sep  3 17:04:47 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 17:04:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 17:04:47 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 17:04:47 2012] Source does appear to be extended
[Mon Sep  3 17:04:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 17:34:26 2012] XMMSAS src. selection expression = ellipse(26687.160000, 25556.160000, 723.618021, 723.618021, 0.000000, X, Y)
[Mon Sep  3 17:34:26 2012] Writing source region out to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src10_src.reg
[Mon Sep  3 17:34:26 2012] Extracting stamp from image fullrun_mos2_xmm0042340101_pi300-10000_cl_sm2.00.img.gz, (266, 253) - (349, 336)
[Mon Sep  3 17:34:26 2012] XMMSAS bgd. selection expression = annulus(26687.160000, 25556.160000, 1206.030035, 2412.060069, X, Y) && !ellipse(24299.746480, 23686.676000, 2387.080069, 2387.080069, 0.000000, X, Y) && !ellipse(24232.630000, 24233.388000, 3612.024104, 3612.024104, 0.000000, X, Y) && !ellipse(23955.676000, 23562.532000, 859.024025, 859.024025, 0.000000, X, Y) && !ellipse(27079.314000, 25705.054000, 1436.704041, 1436.704041, 0.000000, X, Y) && !ellipse(23583.822845, 24651.609253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24941.080000, 24454.872000, 1110.208032, 1110.208032, 0.000000, X, Y) && !ellipse(23560.025818, 24055.334808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25608.333130, 23950.495667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25385.620000, 25062.964000, 2220.176064, 2220.176064, 0.000000, X, Y) && !ellipse(26154.262909, 24912.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24198.106354, 26006.595490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23449.265961, 25630.738922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24903.698200, 22026.354000, 1264.296036, 1264.296036, 0.000000, X, Y) && !ellipse(28463.622000, 24821.444000, 1170.240034, 1170.240034, 0.000000, X, Y) && !ellipse(25746.222000, 25567.118000, 2272.864065, 2272.864065, 0.000000, X, Y) && !ellipse(27052.095581, 24070.367584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26245.728668, 24133.509491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27002.475340, 23652.766000, 1162.480033, 1162.480033, 0.000000, X, Y)
[Mon Sep  3 17:34:26 2012] Writing fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src10.gif
[Mon Sep  3 17:50:30 2012] Mean detx,y = (2119.32, -1774.07) 
[Mon Sep  3 17:50:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 17:50:42 2012] grppha failed
[Mon Sep  3 17:50:42 2012] Setting source spectrum file to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src10_src.pi.gz
[Mon Sep  3 17:50:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Sep  3 17:56:35 2012] Not generating rmf since there are only 81 counts
[Mon Sep  3 17:56:35 2012] rmf not generated due to insufficient counts
[Mon Sep  3 17:56:55 2012] Updating aperture counts using extracted products
[Mon Sep  3 17:56:55 2012] Error reading totcts from fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src10_src.pi.gz
[Mon Sep  3 17:56:55 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 17:56:57 2012] Flag c found in src. 10 procflags, skipping spectral fitting
[Mon Sep  3 17:56:57 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep  3 17:56:58 2012] xmm0042340101/analysis//spectral/fullrun_mos2_xmm0042340101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete