[Mon Sep  3 05:10:58 2012] Detection parameters:
  Position = (285.9, 302.0) = 0 14 16.86 -30 21 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.0 +/- 13.3
  Background counts = 25.8
  Rate = 0.004 +/- 0.0008

[Mon Sep  3 05:10:58 2012] Off-axis axis estimate = 0.95'
[Mon Sep  3 06:54:25 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 06:54:25 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Mon Sep  3 06:54:25 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Mon Sep  3 06:54:25 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 6.90"
[Mon Sep  3 08:38:11 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src33.ximg exists
[Mon Sep  3 08:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src33.csv
[Mon Sep  3 08:38:11 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Sep  3 08:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src33.csv
[Mon Sep  3 08:38:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 08:38:12 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Sep  3 08:38:12 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Sep  3 08:38:12 2012] Fit fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Mon Sep  3 10:44:09 2012] Spatial fit model total counts = 963.201000, observed total counts = 963.000000
[Mon Sep  3 10:44:09 2012] Offset between fit and detection position for source 42 = 0.389477 pixels
[Mon Sep  3 10:44:09 2012] Warning, changing simple spatial fit ID from 33 to 24
[Mon Sep  3 10:44:09 2012] 925.894100 total counts/ 912.544000 bgd. counts: snr = 0.441934
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.389477 pixels
  Position = (286.3, 302.1) = 0 14 16.73 -30 21 29.7
  Extent = 2.8 (1.7-5.5)", rotation angle = 0
  Source counts = 13.4 +/- 30.4
  Background counts = 912.5
  Rate = 0.0008 +/- 0.002
  Deleting source due to low Poisson probability