[Mon Sep  3 05:10:57 2012] Detection parameters:
  Position = (90.1, 321.0) = 0 15 22.64 -30 20 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.2 +/- 11.4
  Background counts = 5.0
  Rate = 0.005 +/- 0.0006

[Mon Sep  3 05:10:58 2012] Off-axis axis estimate = 15.19'
[Mon Sep  3 06:54:25 2012] Using EEF radius (= 14.02 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 06:54:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 06:54:25 2012] Initial guess for spatial extent in simple fitting = 14.02"
[Mon Sep  3 06:54:25 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.154
[Mon Sep  3 06:54:25 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 14.02"
[Mon Sep  3 08:38:11 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src28.ximg exists
[Mon Sep  3 08:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src28.csv
[Mon Sep  3 08:38:11 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon Sep  3 08:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src28.csv
[Mon Sep  3 08:38:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 08:38:12 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon Sep  3 08:38:12 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Sep  3 08:38:12 2012] Fit fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Mon Sep  3 10:44:09 2012] Spatial fit model total counts = 133.763000, observed total counts = 123.000000
[Mon Sep  3 10:44:09 2012] Offset between fit and detection position for source 4 = 0.230015 pixels
[Mon Sep  3 10:44:09 2012] 136.249800 total counts/ 83.960400 bgd. counts: snr = 5.706587
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.230015 pixels
  Position = (90.2, 320.8) = 0 15 22.59 -30 20 6.8
  Extent = 5.2 (4.2-6.9)", rotation angle = 0
  Source counts = 52.3 +/- 11.7
  Background counts = 84.0
  Rate = 0.003 +/- 0.0007
[Mon Sep  3 10:44:09 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 10:44:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 10:44:09 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 10:44:09 2012] Source does appear to be extended
[Mon Sep  3 10:44:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 13:14:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 13:14:35 2012] Initial guess for spatial extent in simple fitting = 5.25"
[Mon Sep  3 13:14:35 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.031
[Mon Sep  3 13:14:35 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 5.25"
[Mon Sep  3 14:51:26 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src26.ximg exists
[Mon Sep  3 14:51:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src26.csv
[Mon Sep  3 14:51:26 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Sep  3 14:51:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src26.csv
[Mon Sep  3 14:51:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 14:51:26 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Sep  3 14:51:26 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Sep  3 14:51:26 2012] Fit fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Sep  3 17:04:38 2012] Spatial fit model total counts = 114.008000, observed total counts = 109.000000
[Mon Sep  3 17:04:38 2012] Offset between fit and detection position for source 4 = 0.007370 pixels
[Mon Sep  3 17:04:38 2012] 117.115600 total counts/ 64.599600 bgd. counts: snr = 6.533964
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.007370 pixels
  Position = (90.2, 320.8) = 0 15 22.59 -30 20 6.8
  Extent = 5.2 (3.9-6.9)", rotation angle = 0
  Source counts = 52.5 +/- 10.8
  Background counts = 64.6
  Rate = 0.003 +/- 0.0006
[Mon Sep  3 17:04:38 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 17:04:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 17:04:38 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 17:04:38 2012] Source does appear to be extended
[Mon Sep  3 17:04:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 17:26:56 2012] XMMSAS src. selection expression = ellipse(7802.280600, 27864.640400, 310.505409, 310.505409, 0.000000, X, Y)
[Mon Sep  3 17:26:56 2012] Writing source region out to fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src4_src.reg
[Mon Sep  3 17:26:56 2012] Extracting stamp from image fullrun_mos1_xmm0042340101_pi300-10000_cl_sm2.00.img.gz, (72, 303) - (108, 339)
[Mon Sep  3 17:26:56 2012] XMMSAS bgd. selection expression = annulus(7802.280600, 27864.640400, 517.509015, 1035.018030, X, Y)
[Mon Sep  3 17:26:56 2012] Writing fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src4.gif
[Mon Sep  3 17:32:15 2012] Mean detx,y = (6066.02, 15250.06) 
[Mon Sep  3 17:32:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 17:32:28 2012] grppha failed
[Mon Sep  3 17:32:28 2012] Setting source spectrum file to fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src4_src.pi.gz
[Mon Sep  3 17:32:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Sep  3 17:34:24 2012] Not generating rmf since there are only 52 counts
[Mon Sep  3 17:34:24 2012] rmf not generated due to insufficient counts
[Mon Sep  3 17:56:54 2012] Updating aperture counts using extracted products
[Mon Sep  3 17:56:54 2012] Error reading totcts from fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src4_src.pi.gz
[Mon Sep  3 17:56:54 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 17:56:56 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep  3 17:56:57 2012] xmm0042340101/analysis//spectral/fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete