[Mon Sep  3 05:10:57 2012] Detection parameters:
  Position = (263.0, 293.0) = 0 14 24.55 -30 22 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.1 +/- 14.8
  Background counts = 28.4
  Rate = 0.005 +/- 0.0009

[Mon Sep  3 05:10:58 2012] Off-axis axis estimate = 2.60'
[Mon Sep  3 06:54:25 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 06:54:25 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Mon Sep  3 06:54:25 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.772
[Mon Sep  3 06:54:25 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 7.73"
[Mon Sep  3 08:38:11 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src26.ximg exists
[Mon Sep  3 08:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src26.csv
[Mon Sep  3 08:38:11 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Sep  3 08:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src26.csv
[Mon Sep  3 08:38:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 08:38:12 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Sep  3 08:38:12 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Sep  3 08:38:12 2012] Fit fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Mon Sep  3 10:44:09 2012] Warning, spatial fit 26 centroid is now closest to src. 46
[Mon Sep  3 10:44:09 2012] Spatial fit model total counts = 486.997000, observed total counts = 487.000000
[Mon Sep  3 10:44:09 2012] Offset between fit and detection position for source 32 = 2.203399 pixels
[Mon Sep  3 10:44:09 2012] Warning, changing simple spatial fit ID from 26 to 45
[Mon Sep  3 10:44:09 2012] 458.877800 total counts/ 393.156000 bgd. counts: snr = 3.314568
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 2.203399 pixels
  Position = (264.9, 294.1) = 0 14 23.91 -30 22 4.2
  Extent = 13.3 (8.2-15.8)", rotation angle = 0
  Source counts = 65.7 +/- 21.4
  Background counts = 393.2
  Rate = 0.004 +/- 0.001
[Mon Sep  3 10:44:09 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 10:44:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 10:44:09 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 10:44:09 2012] Source does appear to be extended
[Mon Sep  3 10:44:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 10:44:09 2012] Source is confused with source 6
[Mon Sep  3 13:14:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 13:14:35 2012] Initial guess for spatial extent in simple fitting = 13.27"
[Mon Sep  3 13:14:35 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.972
[Mon Sep  3 13:14:35 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 13.27"
[Mon Sep  3 14:51:26 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src24.ximg exists
[Mon Sep  3 14:51:26 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src24_1.ximg exists
[Mon Sep  3 14:51:26 2012] Fit fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src24 appears to have run properly
[Mon Sep  3 14:51:26 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Mon Sep  3 14:51:26 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Mon Sep  3 14:51:26 2012] Fit fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Mon Sep  3 17:04:38 2012] Source 32 is offset by -2.715701 and -1.266437 pixels which is larger than
2 X fitted extent = 1.670699 x 1.670699, not incorporating fit results
[Mon Sep  3 17:04:38 2012] Warning, spatial fit 24 centroid is now closest to src. 40
[Mon Sep  3 17:04:38 2012] Spatial fit model total counts = 489.115000, observed total counts = 487.000000
[Mon Sep  3 17:04:38 2012] Offset between fit and detection position for source 32 = 0.217608 pixels
[Mon Sep  3 17:04:38 2012] Warning, changing simple spatial fit ID from 24 to 35
[Mon Sep  3 17:04:38 2012] 475.795800 total counts/ 413.609000 bgd. counts: snr = 3.057759
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.217608 pixels
  Position = (264.7, 294.0) = 0 14 23.96 -30 22 4.8
  Extent = 12.3 (5.4-15.8)", rotation angle = 0
  Source counts = 62.2 +/- 21.8
  Background counts = 413.6
  Rate = 0.004 +/- 0.001
[Mon Sep  3 17:04:38 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 17:04:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 17:04:38 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 17:04:38 2012] Source does appear to be extended
[Mon Sep  3 17:04:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 17:26:56 2012] XMMSAS src. selection expression = ellipse(22984.220000, 25526.850000, 739.926021, 739.926021, 0.000000, X, Y)
[Mon Sep  3 17:26:56 2012] Writing source region out to fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src32_src.reg
[Mon Sep  3 17:26:56 2012] Extracting stamp from image fullrun_mos1_xmm0042340101_pi300-10000_cl_sm2.00.img.gz, (222, 251) - (307, 336)
[Mon Sep  3 17:26:56 2012] XMMSAS bgd. selection expression = annulus(22984.220000, 25526.850000, 1233.210035, 2466.420071, X, Y) && !ellipse(24184.266000, 23527.424000, 1550.112045, 1550.112045, 0.000000, X, Y) && !ellipse(24472.568940, 24463.767400, 1162.808033, 1162.808033, 0.000000, X, Y) && !ellipse(24234.402000, 23854.148000, 714.262421, 714.262421, 0.000000, X, Y) && !ellipse(23969.671916, 24121.547564, 1977.800057, 1490.432110, 90.000000, X, Y) && !ellipse(23927.974000, 23129.052000, 831.384024, 831.384024, 0.000000, X, Y) && !ellipse(24562.666757, 24683.398000, 1170.200034, 707.237473, 3.081440, X, Y) && !ellipse(22300.293320, 23567.174600, 352.534410, 352.534410, 0.000000, X, Y) && !ellipse(24159.773041, 25349.789032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23391.744000, 25623.610000, 585.487217, 585.487217, 0.000000, X, Y) && !ellipse(25364.338593, 24737.093231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23516.576263, 23231.527008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25775.668000, 25347.820000, 1113.024032, 1113.024032, 0.000000, X, Y) && !ellipse(24951.985992, 25171.687012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23038.896667, 23585.928284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26248.211121, 23442.381470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21809.618000, 22068.796000, 1350.336039, 1350.336039, 0.000000, X, Y) && !ellipse(22894.222000, 22915.504000, 1266.336036, 1266.336036, 0.000000, X, Y) && !ellipse(22769.012000, 26288.988000, 1170.976034, 1170.976034, 0.000000, X, Y)
[Mon Sep  3 17:26:56 2012] Writing fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src32.gif
[Mon Sep  3 17:31:35 2012] Mean detx,y = (407.52, 846.45) 
[Mon Sep  3 17:31:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 17:31:47 2012] grppha failed
[Mon Sep  3 17:31:47 2012] Setting source spectrum file to fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src32_src.pi.gz
[Mon Sep  3 17:31:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon Sep  3 17:34:24 2012] Not generating rmf since there are only 62 counts
[Mon Sep  3 17:34:24 2012] rmf not generated due to insufficient counts
[Mon Sep  3 17:56:54 2012] Updating aperture counts using extracted products
[Mon Sep  3 17:56:54 2012] Error reading totcts from fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src32_src.pi.gz
[Mon Sep  3 17:56:54 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 17:56:56 2012] Flag b found in src. 32 procflags, skipping spectral fitting
[Mon Sep  3 17:56:56 2012] Flag c found in src. 32 procflags, skipping spectral fitting
[Mon Sep  3 17:56:56 2012] Source 32 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep  3 17:56:57 2012] xmm0042340101/analysis//spectral/fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete