[Mon Sep 3 05:10:57 2012] Detection parameters: Position = (289.3, 276.0) = 0 14 15.72 -30 23 23.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 271.2 +/- 23.7 Background counts = 37.6 Rate = 0.02 +/- 0.001 [Mon Sep 3 05:10:58 2012] Off-axis axis estimate = 1.76' [Mon Sep 3 06:54:25 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting [Mon Sep 3 06:54:25 2012] Initial guess for spatial extent in simple fitting = 7.31" [Mon Sep 3 06:54:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842 [Mon Sep 3 06:54:25 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.31" [Mon Sep 3 08:38:11 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src7.ximg exists [Mon Sep 3 08:38:11 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src7_1.ximg exists [Mon Sep 3 08:38:11 2012] Fit fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_src7 appears to have run properly [Mon Sep 3 08:38:12 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists [Mon Sep 3 08:38:12 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists [Mon Sep 3 08:38:12 2012] Fit fullrun_mos1_xmm0042340101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly [Mon Sep 3 10:44:09 2012] Source 10 is offset by 3.672968 and 5.568049 pixels which is larger than 2 X fitted extent = 0.912189 x 0.912189, not incorporating fit results [Mon Sep 3 10:44:09 2012] Spatial fit model total counts = 1434.840000, observed total counts = 1434.000000 [Mon Sep 3 10:44:09 2012] Offset between fit and detection position for source 10 = 5.858205 pixels [Mon Sep 3 10:44:09 2012] Warning, changing simple spatial fit ID from 7 to 13 [Mon Sep 3 10:44:09 2012] 1399.981000 total counts/ 1207.620000 bgd. counts: snr = 5.535437 Spatial fit parameters: Offset between fit and detection position for source 10 = 5.858205 pixels Position = (285.9, 280.7) = 0 14 16.87 -30 23 2.4 Extent = 13.9 (13.9-27.9)", rotation angle = 0 Source counts = 192.4 +/- 37.4 Background counts = 1207.6 Rate = 0.01 +/- 0.002 [Mon Sep 3 10:44:09 2012] Spatial fit model total counts = 1373.830000, observed total counts = 1370.000000 [Mon Sep 3 10:44:09 2012] Offset between fit and detection position for source 10 = 4.623524 pixels [Mon Sep 3 10:44:09 2012] Warning, changing simple spatial fit ID from 13 to 21 [Mon Sep 3 10:44:09 2012] 1281.400500 total counts/ 1194.440000 bgd. counts: snr = 2.516169 Spatial fit parameters: Offset between fit and detection position for source 10 = 4.623524 pixels Position = (282.9, 284.3) = 0 14 17.87 -30 22 47.0 Extent = 14.6" x 8.8", rotation angle = 3 Source counts = 87.0 +/- 35.8 Background counts = 1194.4 Rate = 0.005 +/- 0.002 [Mon Sep 3 10:44:09 2012] Vigneting correction estimate = 1.000000 [Mon Sep 3 10:44:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Sep 3 10:44:09 2012] Assessing source extent using major [Mon Sep 3 10:44:09 2012] Source does appear to be extended [Mon Sep 3 10:44:09 2012] Computing asymmetry using major and minor axis, asym = 1.65 [Mon Sep 3 10:44:09 2012] Source is asymmetric [Mon Sep 3 10:44:09 2012] Source is confused with source 3 [Mon Sep 3 10:44:09 2012] Source is confused with source 2 [Mon Sep 3 10:44:09 2012] Source is confused with source 9 [Mon Sep 3 10:44:09 2012] Source is confused with source 5 [Mon Sep 3 10:44:09 2012] Source is confused with source 7 [Mon Sep 3 10:44:09 2012] Source is confused with source 20 [Mon Sep 3 13:14:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Mon Sep 3 13:14:35 2012] Initial guess for spatial extent in simple fitting = 11.73" [Mon Sep 3 13:14:35 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.880 [Mon Sep 3 13:14:35 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 11.73" [Mon Sep 3 14:51:25 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src7.ximg exists [Mon Sep 3 14:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src7.csv [Mon Sep 3 14:51:25 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src7_1.ximg exists [Mon Sep 3 14:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src7.csv [Mon Sep 3 14:51:25 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src7_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Sep 3 14:51:26 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists [Mon Sep 3 14:51:26 2012] fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists [Mon Sep 3 14:51:26 2012] Fit fullrun_mos1_xmm0042340101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly [Mon Sep 3 17:04:38 2012] Warning, spatial fit 7 centroid is now closest to src. 24 [Mon Sep 3 17:04:38 2012] Vigneting correction estimate = 1.000000 [Mon Sep 3 17:04:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Sep 3 17:04:38 2012] Assessing source extent using major [Mon Sep 3 17:04:38 2012] Source does appear to be extended [Mon Sep 3 17:04:38 2012] Computing asymmetry using major and minor axis, asym = 1.65 [Mon Sep 3 17:04:38 2012] Source is asymmetric [Mon Sep 3 17:26:55 2012] XMMSAS src. selection expression = ellipse(24562.666757, 24683.398000, 877.650025, 530.428105, 3.081440, X, Y) [Mon Sep 3 17:26:55 2012] Writing source region out to fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src10_src.reg [Mon Sep 3 17:26:55 2012] Extracting stamp from image fullrun_mos1_xmm0042340101_pi300-10000_cl_sm2.00.img.gz, (232, 234) - (333, 335) [Mon Sep 3 17:26:55 2012] XMMSAS bgd. selection expression = annulus(24562.666757, 24683.398000, 1462.750042, 2925.500084, X, Y) && !ellipse(24184.266000, 23527.424000, 1550.112045, 1550.112045, 0.000000, X, Y) && !ellipse(24472.568940, 24463.767400, 1162.808033, 1162.808033, 0.000000, X, Y) && !ellipse(24234.402000, 23854.148000, 714.262421, 714.262421, 0.000000, X, Y) && !ellipse(23969.671916, 24121.547564, 1977.800057, 1490.432110, 90.000000, X, Y) && !ellipse(23927.974000, 23129.052000, 831.384024, 831.384024, 0.000000, X, Y) && !ellipse(26878.840000, 25758.423000, 1095.856032, 1095.856032, 0.000000, X, Y) && !ellipse(22300.293320, 23567.174600, 352.534410, 352.534410, 0.000000, X, Y) && !ellipse(24159.773041, 25349.789032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23391.744000, 25623.610000, 585.487217, 585.487217, 0.000000, X, Y) && !ellipse(25364.338593, 24737.093231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23516.576263, 23231.527008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27717.848000, 25545.618000, 1176.000034, 1176.000034, 0.000000, X, Y) && !ellipse(26296.327800, 24700.207600, 797.963223, 797.963223, 0.000000, X, Y) && !ellipse(25775.668000, 25347.820000, 1113.024032, 1113.024032, 0.000000, X, Y) && !ellipse(24951.985992, 25171.687012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22984.220000, 25526.850000, 986.568028, 986.568028, 0.000000, X, Y) && !ellipse(23038.896667, 23585.928284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.921814, 24224.221222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26248.211121, 23442.381470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21809.618000, 22068.796000, 1350.336039, 1350.336039, 0.000000, X, Y) && !ellipse(22894.222000, 22915.504000, 1266.336036, 1266.336036, 0.000000, X, Y) && !ellipse(22769.012000, 26288.988000, 1170.976034, 1170.976034, 0.000000, X, Y) [Mon Sep 3 17:26:55 2012] Writing fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src10.gif [Mon Sep 3 17:28:30 2012] Mean detx,y = (420.32, -791.96) [Mon Sep 3 17:28:31 2012] Setting backscal keywords in source and bgd. spectrum [Mon Sep 3 17:28:39 2012] grppha failed [Mon Sep 3 17:28:39 2012] Setting source spectrum file to fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src10_src.pi.gz [Mon Sep 3 17:28:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src10_bgd.pi.gz [Mon Sep 3 17:34:22 2012] Not generating rmf since there are only 86 counts [Mon Sep 3 17:34:22 2012] rmf not generated due to insufficient counts [Mon Sep 3 17:56:54 2012] Updating aperture counts using extracted products [Mon Sep 3 17:56:54 2012] Error reading totcts from fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src10_src.pi.gz [Mon Sep 3 17:56:54 2012] No arf file for this source, not re-computing flux [Mon Sep 3 17:56:56 2012] Flag b found in src. 10 procflags, skipping spectral fitting [Mon Sep 3 17:56:56 2012] Flag c found in src. 10 procflags, skipping spectral fitting [Mon Sep 3 17:56:56 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting [Mon Sep 3 17:56:57 2012] xmm0042340101/analysis//spectral/fullrun_mos1_xmm0042340101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete