[Sun Aug 19 09:05:40 2012] Detection parameters:
  Position = (291.1, 187.2) = 0 2 43.73 -30 7 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.3 +/- 9.8
  Background counts = 13.0
  Rate = 0.002 +/- 0.0004

[Sun Aug 19 09:05:40 2012] Off-axis axis estimate = 8.08'
[Sun Aug 19 15:31:26 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 15:31:26 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Sun Aug 19 15:31:26 2012] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.977
[Sun Aug 19 15:31:26 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 10.47"
[Sun Aug 19 18:18:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src42.ximg exists
[Sun Aug 19 18:18:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src42.csv
[Sun Aug 19 18:18:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun Aug 19 18:18:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src42.csv
[Sun Aug 19 18:18:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 18:18:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun Aug 19 18:18:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun Aug 19 18:18:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun Aug 19 18:18:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun Aug 19 18:18:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 18:19:37 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 13.258197 pixels away
[Sun Aug 19 18:19:37 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 18:19:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 18:19:37 2012] Assessing source extent using major
[Sun Aug 19 18:19:37 2012] Source does appear to be extended
[Sun Aug 19 18:19:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 23:57:35 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 23:57:35 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Sun Aug 19 23:57:35 2012] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.977
[Sun Aug 19 23:57:35 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 10.47"
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src42.ximg exists
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src42_1.ximg exists
[Mon Aug 20 02:29:14 2012] Fit fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src42 appears to have run properly
[Mon Aug 20 02:29:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Mon Aug 20 02:29:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Mon Aug 20 02:29:15 2012] Fit fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Mon Aug 20 02:30:21 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 13.048740 pixels away
[Mon Aug 20 02:30:22 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 02:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 02:30:22 2012] Assessing source extent using major
[Mon Aug 20 02:30:22 2012] Source does appear to be extended
[Mon Aug 20 02:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 07:20:58 2012] XMMSAS src. selection expression = ellipse(25272.952484, 16241.296844, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 20 07:20:58 2012] Writing source region out to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src75_src.reg
[Mon Aug 20 07:20:58 2012] Extracting stamp from image fullrun_mos2_xmm0041750101_pi300-10000_cl_sm2.00.img.gz, (254, 150) - (329, 225)
[Mon Aug 20 07:20:58 2012] XMMSAS bgd. selection expression = annulus(25272.952484, 16241.296844, 1087.500000, 2175.000000, X, Y) && !ellipse(27626.801640, 18346.426200, 467.289613, 467.289613, 0.000000, X, Y) && !ellipse(26415.275519, 15161.400340, 474.497857, 360.527441, 173.613872, X, Y) && !ellipse(22613.786652, 16547.153564, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 07:20:58 2012] Writing fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src75.gif
[Mon Aug 20 07:42:21 2012] Mean detx,y = (4485.04, 7491.94) 
[Mon Aug 20 07:42:23 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 07:42:59 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 07:42:59 2012] Setting source spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Mon Aug 20 07:42:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Mon Aug 20 08:44:44 2012] Not generating rmf since there are only 50 counts
[Mon Aug 20 08:44:44 2012] rmf not generated due to insufficient counts
[Mon Aug 20 08:56:04 2012] Updating aperture counts using extracted products
[Mon Aug 20 08:56:04 2012] Error reading totcts from fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Mon Aug 20 08:56:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 08:56:07 2012] Using photon index=1.80, rate=0.00184, arf fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src75.arf
[Mon Aug 20 08:56:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 08:56:08 2012] Updating source flux to 3.4e-14
[Mon Aug 20 08:57:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting