[Sun Aug 19 09:05:39 2012] Detection parameters:
  Position = (188.5, 303.7) = 0 3 18.05 -29 58 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.4 +/- 13.1
  Background counts = 15.1
  Rate = 0.003 +/- 0.0004

[Sun Aug 19 09:05:40 2012] Off-axis axis estimate = 7.98'
[Sun Aug 19 15:31:26 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 15:31:26 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Sun Aug 19 15:31:26 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.895
[Sun Aug 19 15:31:26 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 10.42"
[Sun Aug 19 18:18:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src29.ximg exists
[Sun Aug 19 18:18:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src29.csv
[Sun Aug 19 18:18:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Aug 19 18:18:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src29.csv
[Sun Aug 19 18:18:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 18:18:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Aug 19 18:18:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Aug 19 18:18:15 2012] Fit fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun Aug 19 18:19:37 2012] Spatial fit model total counts = 331.231000, observed total counts = 326.000000
[Sun Aug 19 18:19:37 2012] Offset between fit and detection position for source 55 = 0.413743 pixels
[Sun Aug 19 18:19:37 2012] 218.066400 total counts/ 153.904000 bgd. counts: snr = 5.171966
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.413743 pixels
  Position = (188.1, 303.6) = 0 3 18.19 -29 58 45.0
  Extent = 5.3 (3.3-7.2)", rotation angle = 0
  Source counts = 64.2 +/- 14.8
  Background counts = 153.9
  Rate = 0.001 +/- 0.0003
[Sun Aug 19 18:19:37 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 18:19:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 18:19:37 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 18:19:37 2012] Source does appear to be extended
[Sun Aug 19 18:19:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 23:57:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 19 23:57:35 2012] Initial guess for spatial extent in simple fitting = 5.29"
[Sun Aug 19 23:57:35 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.019
[Sun Aug 19 23:57:35 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 5.29"
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src29.ximg exists
[Mon Aug 20 02:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src29.csv
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon Aug 20 02:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src29.csv
[Mon Aug 20 02:29:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 02:29:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon Aug 20 02:29:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Aug 20 02:29:15 2012] Fit fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Mon Aug 20 02:30:21 2012] Warning, spatial fit 29 centroid is now closest to src. 50
[Mon Aug 20 02:30:22 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 02:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 02:30:22 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 02:30:22 2012] Source does appear to be extended
[Mon Aug 20 02:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 02:30:22 2012] Source is confused with source 19
[Mon Aug 20 07:20:58 2012] XMMSAS src. selection expression = ellipse(16319.236400, 26363.762800, 317.224809, 317.224809, 0.000000, X, Y)
[Mon Aug 20 07:20:58 2012] Writing source region out to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src55_src.reg
[Mon Aug 20 07:20:58 2012] Extracting stamp from image fullrun_mos2_xmm0041750101_pi300-10000_cl_sm2.00.img.gz, (170, 285) - (206, 322)
[Mon Aug 20 07:20:58 2012] XMMSAS bgd. selection expression = annulus(16319.236400, 26363.762800, 528.708015, 1057.416030, X, Y) && !ellipse(16765.602494, 26286.427633, 1076.280031, 498.633665, 23.800950, X, Y)
[Mon Aug 20 07:20:58 2012] Writing fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src55.gif
[Mon Aug 20 07:35:40 2012] Mean detx,y = (-7777.66, 1809.16) 
[Mon Aug 20 07:35:42 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 07:35:49 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 07:35:49 2012] Setting source spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Mon Aug 20 07:35:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Mon Aug 20 08:42:57 2012] Not generating rmf since there are only 64 counts
[Mon Aug 20 08:42:57 2012] rmf not generated due to insufficient counts
[Mon Aug 20 08:56:04 2012] Updating aperture counts using extracted products
[Mon Aug 20 08:56:04 2012] Error reading totcts from fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Mon Aug 20 08:56:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 08:56:07 2012] Using photon index=1.80, rate=0.00124, arf fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src55.arf
[Mon Aug 20 08:56:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 08:56:07 2012] Updating source flux to 2.3e-14
[Mon Aug 20 08:57:14 2012] Flag c found in src. 55 procflags, skipping spectral fitting
[Mon Aug 20 08:57:14 2012] Source 55 has fewer than 100.000000 counts, skipping spectral fitting