[Sun Aug 19 09:05:39 2012] Detection parameters:
  Position = (137.6, 174.9) = 0 3 35.20 -30 8 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.3 +/- 14.0
  Background counts = 12.6
  Rate = 0.002 +/- 0.0003

[Sun Aug 19 09:05:40 2012] Off-axis axis estimate = 14.71'
[Sun Aug 19 15:31:26 2012] Using EEF radius (= 13.78 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 15:31:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 15:31:26 2012] Initial guess for spatial extent in simple fitting = 13.78"
[Sun Aug 19 15:31:26 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.041
[Sun Aug 19 15:31:26 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 13.78"
[Sun Aug 19 18:18:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src36.ximg exists
[Sun Aug 19 18:18:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src36.csv
[Sun Aug 19 18:18:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src36_1.ximg exists
[Sun Aug 19 18:18:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src36.csv
[Sun Aug 19 18:18:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 18:18:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sun Aug 19 18:18:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sun Aug 19 18:18:15 2012] Fit fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Sun Aug 19 18:19:37 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 18.301277 pixels away
[Sun Aug 19 18:19:37 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 18:19:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 18:19:37 2012] Assessing source extent using major
[Sun Aug 19 18:19:37 2012] Source does appear to be extended
[Sun Aug 19 18:19:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 23:57:35 2012] Using EEF radius (= 13.78 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 23:57:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 23:57:35 2012] Initial guess for spatial extent in simple fitting = 13.78"
[Sun Aug 19 23:57:35 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.041
[Sun Aug 19 23:57:35 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 13.78"
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src36.ximg exists
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src36_1.ximg exists
[Mon Aug 20 02:29:14 2012] Fit fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src36 appears to have run properly
[Mon Aug 20 02:29:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Mon Aug 20 02:29:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Mon Aug 20 02:29:15 2012] Fit fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Mon Aug 20 02:30:21 2012] Source 35 is offset by -0.958469 and 1.853416 pixels which is larger than
2 X fitted extent = 3.188543 x 1.664997, not incorporating fit results
[Mon Aug 20 02:30:22 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 02:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 02:30:22 2012] Assessing source extent using major
[Mon Aug 20 02:30:22 2012] Source does appear to be extended
[Mon Aug 20 02:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 07:20:58 2012] XMMSAS src. selection expression = ellipse(11920.202148, 15167.800797, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 20 07:20:58 2012] Writing source region out to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src35_src.reg
[Mon Aug 20 07:20:58 2012] Extracting stamp from image fullrun_mos2_xmm0041750101_pi300-10000_cl_sm2.00.img.gz, (100, 137) - (175, 212)
[Mon Aug 20 07:20:58 2012] XMMSAS bgd. selection expression = annulus(11920.202148, 15167.800797, 1087.500000, 2175.000000, X, Y)
[Mon Aug 20 07:20:58 2012] Writing fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src35.gif
[Mon Aug 20 07:38:58 2012] Mean detx,y = (-7306.67, 13795.35) 
[Mon Aug 20 07:39:00 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 07:39:36 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 07:39:38 2012] Setting source spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon Aug 20 07:39:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Mon Aug 20 08:43:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 20 08:43:49 2012] rmf not generated due to insufficient counts
[Mon Aug 20 08:56:04 2012] Updating aperture counts using extracted products
[Mon Aug 20 08:56:04 2012] Error reading totcts from fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon Aug 20 08:56:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 08:56:07 2012] Using photon index=1.80, rate=0.00218, arf fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src35.arf
[Mon Aug 20 08:56:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 08:56:07 2012] Updating source flux to 6.3e-14
[Mon Aug 20 08:57:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting