[Sun Aug 19 09:05:38 2012] Detection parameters:
  Position = (254.0, 220.5) = 0 2 56.14 -30 4 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2223.8 +/- 61.7
  Background counts = 13.5
  Rate = 0.07 +/- 0.002

[Sun Aug 19 09:05:40 2012] Off-axis axis estimate = 6.50'
[Sun Aug 19 15:31:26 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 15:31:26 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Sun Aug 19 15:31:26 2012] source mask rpix=2.2, npix_max = 29, mask sum = 17, frac = 0.572
[Sun Aug 19 15:31:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.68"
[Sun Aug 19 18:18:13 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 19 18:18:13 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 19 18:18:13 2012] Fit fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Aug 19 18:18:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 19 18:18:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Aug 19 18:18:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 19 18:18:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Aug 19 18:18:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 18:19:36 2012] Warning, spatial fit 1 centroid is now closest to src. 29
[Sun Aug 19 18:19:36 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.778033 pixels away
[Sun Aug 19 18:19:37 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 18:19:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 18:19:37 2012] Assessing source extent using major
[Sun Aug 19 18:19:37 2012] Source does appear to be extended
[Sun Aug 19 18:19:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 18:19:37 2012] Source is confused with source 29
[Sun Aug 19 23:57:35 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 23:57:35 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Sun Aug 19 23:57:35 2012] source mask rpix=2.2, npix_max = 29, mask sum = 17, frac = 0.572
[Sun Aug 19 23:57:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.68"
[Mon Aug 20 02:29:13 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 20 02:29:14 2012] Fit fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 20 02:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 20 02:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Aug 20 02:29:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 02:30:21 2012] Source 3 is offset by -5.334254 and 4.898615 pixels which is larger than
2 X fitted extent = 0.671393 x 0.671393, not incorporating fit results
[Mon Aug 20 02:30:21 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.098406 pixels away
[Mon Aug 20 02:30:21 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 02:30:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 02:30:21 2012] Assessing source extent using major
[Mon Aug 20 02:30:21 2012] Source does appear to be extended
[Mon Aug 20 02:30:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 07:20:57 2012] Counts = 2223.800537, rescaling region sizes by 2.000000
[Mon Aug 20 07:20:57 2012] XMMSAS src. selection expression = ellipse(22052.709930, 19137.389526, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Aug 20 07:20:57 2012] Writing source region out to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src3_src.reg
[Mon Aug 20 07:20:57 2012] Extracting stamp from image fullrun_mos2_xmm0041750101_pi300-10000_cl_sm2.00.img.gz, (179, 146) - (329, 296)
[Mon Aug 20 07:20:57 2012] XMMSAS bgd. selection expression = annulus(22052.709930, 19137.389526, 4350.000000, 8700.000000, X, Y) && !ellipse(27626.801640, 18346.426200, 467.289613, 467.289613, 0.000000, X, Y) && !ellipse(26415.275519, 15161.400340, 474.497857, 360.527441, 173.613872, X, Y) && !ellipse(20991.629080, 20834.106400, 430.696812, 430.696812, 0.000000, X, Y) && !ellipse(15397.250200, 23460.944200, 511.116015, 350.728010, 64.074000, X, Y) && !ellipse(21957.261627, 19317.823990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29347.233002, 19251.046021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22655.709100, 25105.989400, 317.939131, 317.939131, 0.000000, X, Y) && !ellipse(30753.570160, 20938.062256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16765.602494, 26286.427633, 1076.280031, 498.633665, 23.800950, X, Y) && !ellipse(19989.635200, 21091.805200, 433.303212, 433.303212, 0.000000, X, Y) && !ellipse(30743.282800, 21418.072800, 355.004010, 355.004010, 0.000000, X, Y) && !ellipse(13326.093807, 23248.262218, 967.150147, 447.827877, 79.365683, X, Y) && !ellipse(16319.236400, 26363.762800, 422.966412, 422.966412, 0.000000, X, Y) && !ellipse(16110.000200, 22119.655800, 470.016814, 275.123208, 51.796000, X, Y) && !ellipse(14259.393337, 19037.137532, 666.729128, 263.281697, 53.193233, X, Y) && !ellipse(18282.961400, 11846.164800, 273.550408, 273.550408, 0.000000, X, Y) && !ellipse(15660.458000, 22683.076000, 343.752010, 343.752010, 0.000000, X, Y) && !ellipse(22613.786652, 16547.153564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25272.952484, 16241.296844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18089.558600, 27010.009000, 275.602408, 275.602408, 0.000000, X, Y) && !ellipse(30900.717194, 14655.500946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30370.663000, 13839.810400, 388.000811, 388.000811, 0.000000, X, Y) && !ellipse(28191.652800, 20923.541400, 327.640809, 327.640809, 0.000000, X, Y) && !ellipse(22564.536720, 24121.149400, 360.556010, 360.556010, 0.000000, X, Y) && !ellipse(19001.167938, 20745.117294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21897.568604, 23303.857971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21509.456421, 11507.246857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17513.134600, 23976.647800, 365.293611, 365.293611, 0.000000, X, Y) && !ellipse(25784.250020, 26136.675600, 401.816012, 401.816012, 0.000000, X, Y) && !ellipse(19030.985400, 27331.953400, 666.980819, 666.980819, 0.000000, X, Y) && !ellipse(28337.334198, 16923.075180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31005.046570, 15214.816055, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 07:20:57 2012] Writing fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src3.gif
[Mon Aug 20 07:21:06 2012] Mean detx,y = (351.09, 6062.18) 
[Mon Aug 20 07:21:09 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 07:23:42 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 07:23:42 2012] Setting source spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Aug 20 07:23:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Aug 20 07:58:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 20 07:58:13 2012] rmf not generated due to insufficient counts
[Mon Aug 20 08:56:02 2012] Updating aperture counts using extracted products
[Mon Aug 20 08:56:03 2012] Error reading totcts from fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Aug 20 08:56:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 08:56:05 2012] Using photon index=1.80, rate=0.0723, arf fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src3.arf
[Mon Aug 20 08:56:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 08:56:05 2012] Updating source flux to 1.3e-12
[Mon Aug 20 08:57:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Aug 20 08:58:37 2012] xmm0041750101/analysis//spectral/fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete