[Sun Aug 19 09:05:39 2012] Detection parameters:
  Position = (355.7, 169.0) = 0 2 22.04 -30 8 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.0 +/- 11.2
  Background counts = 12.2
  Rate = 0.002 +/- 0.0002

[Sun Aug 19 09:05:40 2012] Off-axis axis estimate = 10.26'
[Sun Aug 19 15:31:26 2012] Using EEF radius (= 11.56 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 15:31:26 2012] Initial guess for spatial extent in simple fitting = 11.56"
[Sun Aug 19 15:31:26 2012] source mask rpix=2.7, npix_max = 39, mask sum = 31, frac = 0.777
[Sun Aug 19 15:31:26 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 11.56"
[Sun Aug 19 18:18:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src48.ximg exists
[Sun Aug 19 18:18:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src48.csv
[Sun Aug 19 18:18:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src48_1.ximg exists
[Sun Aug 19 18:18:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src48.csv
[Sun Aug 19 18:18:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 18:18:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sun Aug 19 18:18:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun Aug 19 18:18:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sun Aug 19 18:18:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun Aug 19 18:18:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 18:19:37 2012] Warning, spatial fit 48 centroid is now closest to src. 76
[Sun Aug 19 18:19:37 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 18:19:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 18:19:37 2012] Assessing source extent using major
[Sun Aug 19 18:19:37 2012] Source does appear to be extended
[Sun Aug 19 18:19:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 18:19:37 2012] Source is confused with source 76
[Sun Aug 19 23:57:35 2012] Using EEF radius (= 11.56 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 23:57:35 2012] Initial guess for spatial extent in simple fitting = 11.56"
[Sun Aug 19 23:57:35 2012] source mask rpix=2.7, npix_max = 39, mask sum = 31, frac = 0.777
[Sun Aug 19 23:57:35 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 11.56"
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src48.ximg exists
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src48_1.ximg exists
[Mon Aug 20 02:29:14 2012] Fit fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src48 appears to have run properly
[Mon Aug 20 02:29:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Mon Aug 20 02:29:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon Aug 20 02:29:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Mon Aug 20 02:29:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon Aug 20 02:29:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 02:30:21 2012] Warning, spatial fit 48 centroid is now closest to src. 76
[Mon Aug 20 02:30:22 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 02:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 02:30:22 2012] Assessing source extent using major
[Mon Aug 20 02:30:22 2012] Source does appear to be extended
[Mon Aug 20 02:30:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 07:20:58 2012] XMMSAS src. selection expression = ellipse(30900.717194, 14655.500946, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 20 07:20:58 2012] Writing source region out to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src28_src.reg
[Mon Aug 20 07:20:58 2012] Extracting stamp from image fullrun_mos2_xmm0041750101_pi300-10000_cl_sm2.00.img.gz, (318, 132) - (393, 207)
[Mon Aug 20 07:20:58 2012] XMMSAS bgd. selection expression = annulus(30900.717194, 14655.500946, 1087.500000, 2175.000000, X, Y) && !ellipse(30370.663000, 13839.810400, 388.000811, 388.000811, 0.000000, X, Y) && !ellipse(33486.386505, 16390.066101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28337.334198, 16923.075180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31005.046570, 15214.816055, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 07:20:58 2012] Writing fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src28.gif
[Mon Aug 20 07:44:55 2012] Mean detx,y = (10217.83, 6655.00) 
[Mon Aug 20 07:44:57 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 07:45:20 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 07:45:20 2012] Setting source spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Mon Aug 20 07:45:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Mon Aug 20 08:45:31 2012] Not generating rmf since there are only 79 counts
[Mon Aug 20 08:45:31 2012] rmf not generated due to insufficient counts
[Mon Aug 20 08:56:04 2012] Updating aperture counts using extracted products
[Mon Aug 20 08:56:05 2012] Error reading totcts from fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Mon Aug 20 08:56:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 08:56:08 2012] Using photon index=1.80, rate=0.00155, arf fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src28.arf
[Mon Aug 20 08:56:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 08:56:08 2012] Updating source flux to 4.3e-14
[Mon Aug 20 08:57:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting