[Sun Aug 19 09:05:38 2012] Detection parameters:
  Position = (438.7, 180.0) = 0 1 54.24 -30 7 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214.9 +/- 17.8
  Background counts = 10.1
  Rate = 0.004 +/- 0.0003

[Sun Aug 19 09:05:40 2012] Off-axis axis estimate = 13.31'
[Sun Aug 19 15:31:26 2012] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 15:31:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 15:31:26 2012] Initial guess for spatial extent in simple fitting = 13.08"
[Sun Aug 19 15:31:26 2012] source mask rpix=3.0, npix_max = 49, mask sum = 47, frac = 0.955
[Sun Aug 19 15:31:26 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 13.08"
[Sun Aug 19 18:18:13 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src16.ximg exists
[Sun Aug 19 18:18:13 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Aug 19 18:18:13 2012] Fit fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src16 appears to have run properly
[Sun Aug 19 18:18:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Aug 19 18:18:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Aug 19 18:18:15 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Aug 19 18:18:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Aug 19 18:18:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 18:19:36 2012] Spatial fit model total counts = 443.091000, observed total counts = 417.000000
[Sun Aug 19 18:19:36 2012] Offset between fit and detection position for source 2 = 1.279632 pixels
[Sun Aug 19 18:19:36 2012] 364.692000 total counts/ 219.655000 bgd. counts: snr = 9.786069
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.279632 pixels
  Position = (439.4, 181.1) = 0 1 54.00 -30 7 37.7
  Extent = 9.3" x 3.5", rotation angle = 310
  Source counts = 145.0 +/- 19.1
  Background counts = 219.7
  Rate = 0.003 +/- 0.0004
[Sun Aug 19 18:19:37 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 18:19:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 18:19:37 2012] Assessing source extent using major
[Sun Aug 19 18:19:37 2012] Source does appear to be extended
[Sun Aug 19 18:19:37 2012] Computing asymmetry using major and minor axis, asym = 2.69
[Sun Aug 19 18:19:37 2012] Source is asymmetric
[Sun Aug 19 23:57:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 19 23:57:35 2012] Initial guess for spatial extent in simple fitting = 6.38"
[Sun Aug 19 23:57:35 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.034
[Sun Aug 19 23:57:35 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 6.38"
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src16.ximg exists
[Mon Aug 20 02:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src16.csv
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon Aug 20 02:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src16.csv
[Mon Aug 20 02:29:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon Aug 20 02:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Aug 20 02:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Mon Aug 20 02:29:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 02:30:21 2012] Warning, spatial fit 16 centroid is now closest to src. 33
[Mon Aug 20 02:30:21 2012] Spatial fit model total counts = 424.012000, observed total counts = 411.000000
[Mon Aug 20 02:30:21 2012] Offset between fit and detection position for source 2 = 1.081728 pixels
[Mon Aug 20 02:30:21 2012] Warning, changing simple spatial fit ID from 16 to 26
[Mon Aug 20 02:30:21 2012] 426.872300 total counts/ 338.671000 bgd. counts: snr = 4.792763
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.081728 pixels
  Position = (438.9, 180.1) = 0 1 54.15 -30 7 41.9
  Extent = 7.5 (5.9-9.7)", rotation angle = 135 (125-148) degrees
  Source counts = 88.2 +/- 20.7
  Background counts = 338.7
  Rate = 0.002 +/- 0.0004
[Mon Aug 20 02:30:22 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 02:30:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 02:30:22 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 02:30:22 2012] Source does appear to be extended
[Mon Aug 20 02:30:22 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.64
[Mon Aug 20 02:30:22 2012] Source is asymmetric
[Mon Aug 20 07:20:57 2012] XMMSAS src. selection expression = ellipse(38138.088000, 15620.266000, 450.239413, 192.665406, 135.388000, X, Y)
[Mon Aug 20 07:20:57 2012] Writing source region out to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src2_src.reg
[Mon Aug 20 07:20:57 2012] Extracting stamp from image fullrun_mos2_xmm0041750101_pi300-10000_cl_sm2.00.img.gz, (413, 154) - (465, 206)
[Mon Aug 20 07:20:57 2012] XMMSAS bgd. selection expression = annulus(38138.088000, 15620.266000, 750.399022, 1500.798043, X, Y) && !ellipse(37499.585419, 15771.282318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37004.515381, 14568.121277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38297.527800, 17289.156400, 255.940807, 255.940807, 0.000000, X, Y)
[Mon Aug 20 07:20:57 2012] Writing fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src2.gif
[Mon Aug 20 07:30:10 2012] Mean detx,y = (16477.58, 2903.99) 
[Mon Aug 20 07:30:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 07:30:31 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 07:30:31 2012] Setting source spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Aug 20 07:30:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Aug 20 08:34:01 2012] Not generating rmf since there are only 88 counts
[Mon Aug 20 08:34:01 2012] rmf not generated due to insufficient counts
[Mon Aug 20 08:56:03 2012] Updating aperture counts using extracted products
[Mon Aug 20 08:56:03 2012] Error reading totcts from fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Aug 20 08:56:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 08:56:06 2012] Using photon index=1.80, rate=0.00171, arf fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src2.arf
[Mon Aug 20 08:56:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 08:56:06 2012] Updating source flux to 9e-14
[Mon Aug 20 08:57:14 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting