[Sun Aug 19 09:05:38 2012] Detection parameters:
  Position = (318.2, 211.9) = 0 2 34.65 -30 5 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 397.7 +/- 24.8
  Background counts = 14.3
  Rate = 0.01 +/- 0.0008

[Sun Aug 19 09:05:40 2012] Off-axis axis estimate = 6.43'
[Sun Aug 19 15:31:26 2012] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 15:31:26 2012] Initial guess for spatial extent in simple fitting = 9.64"
[Sun Aug 19 15:31:26 2012] source mask rpix=2.2, npix_max = 29, mask sum = 32, frac = 1.084
[Sun Aug 19 15:31:26 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.64"
[Sun Aug 19 18:18:13 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Aug 19 18:18:13 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Aug 19 18:18:13 2012] Fit fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_src2 appears to have run properly
[Sun Aug 19 18:18:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Aug 19 18:18:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Aug 19 18:18:14 2012] Fit fullrun_mos2_xmm0041750101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Aug 19 18:19:36 2012] Spatial fit model total counts = 492.804000, observed total counts = 479.000000
[Sun Aug 19 18:19:36 2012] Offset between fit and detection position for source 1 = 0.509128 pixels
[Sun Aug 19 18:19:36 2012] 493.314000 total counts/ 205.595000 bgd. counts: snr = 20.066067
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.509128 pixels
  Position = (318.1, 211.4) = 0 2 34.67 -30 5 26.1
  Extent = 5.8 (5.2-6.5)", rotation angle = 0
  Source counts = 287.7 +/- 22.2
  Background counts = 205.6
  Rate = 0.006 +/- 0.0004
[Sun Aug 19 18:19:37 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 18:19:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 18:19:37 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 18:19:37 2012] Source does appear to be extended
[Sun Aug 19 18:19:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 23:57:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 19 23:57:35 2012] Initial guess for spatial extent in simple fitting = 5.84"
[Sun Aug 19 23:57:35 2012] source mask rpix=1.3, npix_max = 13, mask sum = 10, frac = 0.736
[Sun Aug 19 23:57:35 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.84"
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src2.ximg exists
[Mon Aug 20 02:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src2.csv
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Aug 20 02:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src2.csv
[Mon Aug 20 02:29:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Aug 20 02:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Aug 20 02:29:14 2012] fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Aug 20 02:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Aug 20 02:29:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041750101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 02:30:21 2012] Warning, spatial fit 2 centroid is now closest to src. 72
[Mon Aug 20 02:30:21 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 02:30:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 02:30:21 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 02:30:21 2012] Source does appear to be extended
[Mon Aug 20 02:30:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 07:20:57 2012] XMMSAS src. selection expression = ellipse(27626.801640, 18346.426200, 350.467210, 350.467210, 0.000000, X, Y)
[Mon Aug 20 07:20:57 2012] Writing source region out to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 20 07:20:57 2012] Extracting stamp from image fullrun_mos2_xmm0041750101_pi300-10000_cl_sm2.00.img.gz, (298, 191) - (338, 232)
[Mon Aug 20 07:20:57 2012] XMMSAS bgd. selection expression = annulus(27626.801640, 18346.426200, 584.112017, 1168.224034, X, Y) && !ellipse(29347.233002, 19251.046021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28337.334198, 16923.075180, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 07:20:57 2012] Writing fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src1.gif
[Mon Aug 20 07:23:49 2012] Mean detx,y = (5800.43, 4609.32) 
[Mon Aug 20 07:23:51 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 07:24:17 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 07:24:17 2012] Setting source spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 20 07:24:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 20 08:56:03 2012] Updating aperture counts using extracted products
[Mon Aug 20 08:56:03 2012] Error reading totcts from fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 20 08:56:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 08:56:05 2012] Using photon index=1.80, rate=0.00558, arf fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src1.arf
[Mon Aug 20 08:56:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 08:56:05 2012] Updating source flux to 1.2e-13
[Mon Aug 20 08:58:37 2012] Reading fit data from xmm0041750101/analysis//spectral/fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Aug 20 08:58:37 2012] Spectral fit parameter nH value = 2.91548e+21
[Mon Aug 20 08:58:37 2012] Spectral fit parameter PhoIndex value = 4.63204
[Mon Aug 20 08:58:37 2012] Failed to get F(0.3-8.0) from xmm0041750101/analysis//spectral/fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Aug 20 08:58:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 08:58:37 2012] Using Nh = 2.9e+21, photon index=4.63, rate=0.00558, arf fullrun_mos2_xmm0041750101_pi300-10000_pass1_cl_src1.arf
[Mon Aug 20 08:58:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 08:58:37 2012] Updating source flux to 7.3e-14