[Sat Jul 21 10:13:00 2012] Detection parameters: Position = (318.5, 186.2) = 21 6 41.02 38 37 55.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 26.5 +/- 7.0 Background counts = 4.7 Rate = 0.003 +/- 0.0009 [Sat Jul 21 10:13:01 2012] Off-axis axis estimate = 8.26' [Sat Jul 21 11:10:07 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting [Sat Jul 21 11:10:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jul 21 11:10:07 2012] Initial guess for spatial extent in simple fitting = 10.56" [Sat Jul 21 11:10:07 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.875 [Sat Jul 21 11:10:07 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.56" [Sat Jul 21 11:31:02 2012] fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_src6.ximg exists [Sat Jul 21 11:31:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_src6.csv [Sat Jul 21 11:31:02 2012] fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_src6_1.ximg exists [Sat Jul 21 11:31:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_src6.csv [Sat Jul 21 11:31:02 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 21 11:31:03 2012] fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Sat Jul 21 11:31:03 2012] fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Sat Jul 21 11:31:03 2012] Fit fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly [Sat Jul 21 11:31:13 2012] Spatial fit model total counts = 63.784700, observed total counts = 62.000000 [Sat Jul 21 11:31:13 2012] Offset between fit and detection position for source 9 = 0.061044 pixels [Sat Jul 21 11:31:13 2012] 63.174200 total counts/ 44.112000 bgd. counts: snr = 2.870084 Spatial fit parameters: Offset between fit and detection position for source 9 = 0.061044 pixels Position = (318.5, 186.3) = 21 6 41.01 38 37 55.6 Extent = 5.5 (3.1-8.7)", rotation angle = 0 Source counts = 19.1 +/- 7.9 Background counts = 44.1 Rate = 0.001 +/- 0.0006 [Sat Jul 21 11:31:13 2012] Vigneting correction estimate = 1.000000 [Sat Jul 21 11:31:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jul 21 11:31:13 2012] Assessing source extent using major axis lower bound [Sat Jul 21 11:31:13 2012] Source does appear to be extended [Sat Jul 21 11:31:13 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jul 21 11:31:13 2012] Deleting source due to low Poisson probability 0.9