[Sat Jul 21 10:12:59 2012] Detection parameters:
  Position = (279.8, 286.5) = 21 6 55.41 38 45 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 944.1 +/- 36.9
  Background counts = 7.3
  Rate = 0.07 +/- 0.003

[Sat Jul 21 10:13:00 2012] Off-axis axis estimate = 1.61'
[Sat Jul 21 11:10:07 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 11:10:07 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Sat Jul 21 11:10:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Sat Jul 21 11:10:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Sat Jul 21 11:31:02 2012] fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 21 11:31:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 11:31:02 2012] fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 21 11:31:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 11:31:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 11:31:03 2012] fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 21 11:31:03 2012] fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 21 11:31:03 2012] Fit fullrun_mos2_xmm0041741101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 21 11:31:13 2012] Spatial fit model total counts = 1118.160000, observed total counts = 1201.000000
[Sat Jul 21 11:31:13 2012] Offset between fit and detection position for source 2 = 0.037642 pixels
[Sat Jul 21 11:31:13 2012] 1090.942000 total counts/ 479.938000 bgd. counts: snr = 27.890191
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.037642 pixels
  Position = (279.7, 286.5) = 21 6 55.42 38 45 11.7
  Extent = 4.6 (4.2-5.0)", rotation angle = 0
  Source counts = 611.0 +/- 33.0
  Background counts = 479.9
  Rate = 0.04 +/- 0.002
[Sat Jul 21 11:31:13 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 11:31:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 11:31:13 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 11:31:13 2012] Source does appear to be extended
[Sat Jul 21 11:31:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 11:31:13 2012] Source is confused with source 1
[Sat Jul 21 11:31:13 2012] Source is confused with source 8
[Sat Jul 21 12:14:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 12:14:51 2012] Initial guess for spatial extent in simple fitting = 4.60"
[Sat Jul 21 12:14:51 2012] source mask rpix=1.1, npix_max = 9, mask sum = 6, frac = 0.618
[Sat Jul 21 12:14:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.60"
[Sat Jul 21 12:32:52 2012] fullrun_mos2_xmm0041741101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 21 12:32:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0041741101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 12:32:52 2012] fullrun_mos2_xmm0041741101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 21 12:32:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0041741101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 12:32:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041741101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041741101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 12:32:53 2012] fullrun_mos2_xmm0041741101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 21 12:32:53 2012] fullrun_mos2_xmm0041741101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 21 12:32:53 2012] Fit fullrun_mos2_xmm0041741101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 21 12:33:00 2012] Spatial fit model total counts = 1103.820000, observed total counts = 1198.000000
[Sat Jul 21 12:33:00 2012] Offset between fit and detection position for source 2 = 0.007875 pixels
[Sat Jul 21 12:33:00 2012] 1080.788000 total counts/ 467.710000 bgd. counts: snr = 28.348325
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.007875 pixels
  Position = (279.7, 286.5) = 21 6 55.43 38 45 11.7
  Extent = 4.6 (4.3-5.0)", rotation angle = 0
  Source counts = 613.1 +/- 32.9
  Background counts = 467.7
  Rate = 0.04 +/- 0.002
[Sat Jul 21 12:33:00 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 12:33:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 12:33:00 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 12:33:00 2012] Source does appear to be extended
[Sat Jul 21 12:33:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 13:06:17 2012] XMMSAS src. selection expression = ellipse(24287.961000, 24880.507400, 276.219008, 276.219008, 0.000000, X, Y)
[Sat Jul 21 13:06:17 2012] Writing source region out to fullrun_mos2_xmm0041741101_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 21 13:06:17 2012] Extracting stamp from image fullrun_mos2_xmm0041741101_pi300-10000_cl_sm2.00.img.gz, (264, 271) - (296, 302)
[Sat Jul 21 13:06:17 2012] XMMSAS bgd. selection expression = annulus(24287.961000, 24880.507400, 460.365013, 920.730026, X, Y) && !ellipse(24030.645691, 24406.831482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23781.972992, 24555.154694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23767.463257, 25894.088623, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 13:06:17 2012] Writing fullrun_mos2_xmm0041741101_pi300-10000_pass1_cl_src2.gif
[Sat Jul 21 13:06:20 2012] Mean detx,y = (-265.36, -367.93) 
[Sat Jul 21 13:06:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 13:06:30 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 13:06:31 2012] Setting source spectrum file to fullrun_mos2_xmm0041741101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 21 13:06:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0041741101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 21 13:14:42 2012] Updating aperture counts using extracted products
[Sat Jul 21 13:14:42 2012] Error reading totcts from fullrun_mos2_xmm0041741101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 21 13:14:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 13:14:43 2012] Using photon index=1.80, rate=0.043, arf fullrun_mos2_xmm0041741101_pi300-10000_pass1_cl_src2.arf
[Sat Jul 21 13:14:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 13:14:43 2012] Updating source flux to 7.2e-13
[Sat Jul 21 13:15:22 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sat Jul 21 13:15:48 2012] Reading fit data from xmm0041741101/analysis//spectral/fullrun_mos2_xmm0041741101_pi300-10000_pass1_cl_src2_pl.csv
[Sat Jul 21 13:15:48 2012] Spectral fit parameter nH value = 3.53391e+21
[Sat Jul 21 13:15:48 2012] Spectral fit parameter PhoIndex value = 6.20695
[Sat Jul 21 13:15:48 2012] Failed to get F(0.3-8.0) from xmm0041741101/analysis//spectral/fullrun_mos2_xmm0041741101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Jul 21 13:15:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 13:15:48 2012] Using Nh = 3.5e+21, photon index=6.21, rate=0.043, arf fullrun_mos2_xmm0041741101_pi300-10000_pass1_cl_src2.arf
[Sat Jul 21 13:15:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 13:15:48 2012] Updating source flux to 4.9e-13