[Sat Jul 21 10:12:32 2012] Detection parameters:
  Position = (273.9, 298.5) = 21 6 57.59 38 46 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.8 +/- 9.4
  Background counts = 6.9
  Rate = 0.003 +/- 0.0007

[Sat Jul 21 10:12:32 2012] Off-axis axis estimate = 1.78'
[Sat Jul 21 10:44:23 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 10:44:23 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Sat Jul 21 10:44:23 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.050
[Sat Jul 21 10:44:23 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.32"
[Sat Jul 21 11:10:07 2012] fullrun_mos1_xmm0041741101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jul 21 11:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041741101_pi300-10000_cl_pass0_src6.csv
[Sat Jul 21 11:10:07 2012] fullrun_mos1_xmm0041741101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jul 21 11:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041741101_pi300-10000_cl_pass0_src6.csv
[Sat Jul 21 11:10:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041741101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041741101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 11:10:07 2012] fullrun_mos1_xmm0041741101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jul 21 11:10:07 2012] fullrun_mos1_xmm0041741101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jul 21 11:10:07 2012] Fit fullrun_mos1_xmm0041741101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Jul 21 11:31:10 2012] Spatial fit model total counts = 142.647000, observed total counts = 143.000000
[Sat Jul 21 11:31:10 2012] Offset between fit and detection position for source 9 = 0.092386 pixels
[Sat Jul 21 11:31:10 2012] 139.853900 total counts/ 111.529000 bgd. counts: snr = 2.682097
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.092386 pixels
  Position = (273.8, 298.6) = 21 6 57.63 38 46 4.0
  Extent = 6.1 (3.4-8.4)", rotation angle = 0
  Source counts = 28.3 +/- 11.8
  Background counts = 111.5
  Rate = 0.002 +/- 0.0008
[Sat Jul 21 11:31:10 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 11:31:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 11:31:10 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 11:31:10 2012] Source does appear to be extended
[Sat Jul 21 11:31:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 11:54:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 11:54:52 2012] Initial guess for spatial extent in simple fitting = 6.06"
[Sat Jul 21 11:54:52 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.838
[Sat Jul 21 11:54:52 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.06"
[Sat Jul 21 12:14:51 2012] fullrun_mos1_xmm0041741101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jul 21 12:14:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041741101_pi300-10000_cl_pass1_src5.csv
[Sat Jul 21 12:14:51 2012] fullrun_mos1_xmm0041741101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jul 21 12:14:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041741101_pi300-10000_cl_pass1_src5.csv
[Sat Jul 21 12:14:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041741101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041741101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 12:14:51 2012] fullrun_mos1_xmm0041741101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jul 21 12:14:51 2012] fullrun_mos1_xmm0041741101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jul 21 12:14:51 2012] Fit fullrun_mos1_xmm0041741101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jul 21 12:32:57 2012] Warning, spatial fit 5 centroid is now closest to src. 10
[Sat Jul 21 12:32:57 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 12:32:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 12:32:57 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 12:32:57 2012] Source does appear to be extended
[Sat Jul 21 12:32:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 12:32:57 2012] Deleting source due to low Poisson probability 0.9