[Fri Jul 20 15:39:01 2012] Detection parameters:
  Position = (315.9, 317.0) = 21 6 55.04 38 45 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1406.9 +/- 45.2
  Background counts = 3.6
  Rate = 0.2 +/- 0.006

[Fri Jul 20 15:39:01 2012] Off-axis axis estimate = 1.85'
[Fri Jul 20 16:00:42 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 16:00:42 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Fri Jul 20 16:00:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Fri Jul 20 16:00:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.35"
[Fri Jul 20 16:15:48 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 20 16:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 16:15:48 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 20 16:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 16:15:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 16:15:48 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 20 16:15:48 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 20 16:15:48 2012] Fit fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 20 16:23:57 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.319066 pixels away
[Fri Jul 20 16:23:57 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:23:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:23:57 2012] Assessing source extent using major
[Fri Jul 20 16:23:57 2012] Source does appear to be extended
[Fri Jul 20 16:23:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 16:23:57 2012] Source is confused with source 1
[Fri Jul 20 16:37:09 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 16:37:09 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Fri Jul 20 16:37:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Fri Jul 20 16:37:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.35"
[Fri Jul 20 16:51:37 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 20 16:51:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 16:51:37 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 20 16:51:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 16:51:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 16:51:37 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 20 16:51:37 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 20 16:51:37 2012] Fit fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 20 17:04:11 2012] Spatial fit model total counts = 1596.880000, observed total counts = 1603.000000
[Fri Jul 20 17:04:11 2012] Offset between fit and detection position for source 2 = 0.156634 pixels
[Fri Jul 20 17:04:11 2012] 1541.977000 total counts/ 692.611000 bgd. counts: snr = 32.273806
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.156634 pixels
  Position = (315.8, 317.1) = 21 6 55.09 38 45 8.8
  Extent = 4.9 (4.6-5.2)", rotation angle = 0
  Source counts = 849.4 +/- 39.3
  Background counts = 692.6
  Rate = 0.1 +/- 0.005
[Fri Jul 20 17:04:11 2012] Spatial fit model total counts = 1508.090000, observed total counts = 1529.000000
[Fri Jul 20 17:04:11 2012] Offset between fit and detection position for source 2 = 0.073327 pixels
[Fri Jul 20 17:04:11 2012] Warning, changing simple spatial fit ID from 1 to 2
[Fri Jul 20 17:04:11 2012] 1596.341000 total counts/ 881.402000 bgd. counts: snr = 24.081413
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.073327 pixels
  Position = (315.7, 317.1) = 21 6 55.11 38 45 8.7
  Extent = 4.2 (4.0-4.4)", rotation angle = 0
  Source counts = 714.9 +/- 40.0
  Background counts = 881.4
  Rate = 0.09 +/- 0.005
[Fri Jul 20 17:04:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 17:04:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 17:04:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 17:04:11 2012] Source does appear to be extended
[Fri Jul 20 17:04:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 17:24:56 2012] XMMSAS src. selection expression = ellipse(27418.694000, 27537.000000, 252.462007, 252.462007, 0.000000, X, Y)
[Fri Jul 20 17:24:56 2012] Writing source region out to fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul 20 17:24:56 2012] Extracting stamp from image fullrun_mos1_xmm0041741001_pi300-10000_cl_sm2.00.img.gz, (301, 303) - (330, 332)
[Fri Jul 20 17:24:56 2012] XMMSAS bgd. selection expression = annulus(27418.694000, 27537.000000, 420.770012, 841.540024, X, Y) && !ellipse(27130.182648, 27016.672180, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 17:24:56 2012] Writing fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src2.gif
[Fri Jul 20 17:24:57 2012] Mean detx,y = (668.89, -594.96) 
[Fri Jul 20 17:24:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 17:25:05 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 17:25:05 2012] Setting source spectrum file to fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 20 17:25:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 20 17:33:18 2012] Updating aperture counts using extracted products
[Fri Jul 20 17:33:18 2012] Error reading totcts from fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 20 17:33:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 17:33:18 2012] Using photon index=1.80, rate=0.0875, arf fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src2.arf
[Fri Jul 20 17:33:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 17:33:18 2012] Updating source flux to 1.4e-12
[Fri Jul 20 17:33:19 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Jul 20 17:33:32 2012] Reading fit data from xmm0041741001/analysis//spectral/fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jul 20 17:33:32 2012] Spectral fit parameter nH value = 4.67891e+21
[Fri Jul 20 17:33:32 2012] Spectral fit parameter PhoIndex value = 6.40336
[Fri Jul 20 17:33:32 2012] Failed to get F(0.3-8.0) from xmm0041741001/analysis//spectral/fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 17:33:32 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 17:33:32 2012] Using Nh = 4.7e+21, photon index=6.40, rate=0.0875, arf fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src2.arf
[Fri Jul 20 17:33:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 17:33:32 2012] Updating source flux to 8.9e-13