[Fri Jul 20 15:39:01 2012] Detection parameters:
  Position = (312.4, 311.1) = 21 6 56.35 38 44 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 475.7 +/- 27.3
  Background counts = 3.6
  Rate = 0.06 +/- 0.003

[Fri Jul 20 15:39:01 2012] Off-axis axis estimate = 1.37'
[Fri Jul 20 16:00:42 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 16:00:42 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Fri Jul 20 16:00:42 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.097
[Fri Jul 20 16:00:42 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.11"
[Fri Jul 20 16:15:48 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jul 20 16:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_src2.csv
[Fri Jul 20 16:15:48 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jul 20 16:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_src2.csv
[Fri Jul 20 16:15:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 16:15:48 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jul 20 16:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jul 20 16:15:48 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jul 20 16:15:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jul 20 16:15:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041741001_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 16:23:57 2012] Spatial fit model total counts = 412.499000, observed total counts = 1529.000000
[Fri Jul 20 16:23:57 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 20 16:23:57 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 16:23:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 16:23:57 2012] Assessing source extent using major
[Fri Jul 20 16:23:57 2012] Source does appear to be extended
[Fri Jul 20 16:23:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 16:23:57 2012] Source is confused with source 2
[Fri Jul 20 16:37:09 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 16:37:09 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Fri Jul 20 16:37:09 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.097
[Fri Jul 20 16:37:09 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.11"
[Fri Jul 20 16:51:37 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 20 16:51:37 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 20 16:51:37 2012] Fit fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Jul 20 16:51:37 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 20 16:51:37 2012] fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 20 16:51:37 2012] Fit fullrun_mos1_xmm0041741001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jul 20 17:04:11 2012] Warning, spatial fit 2 centroid is now closest to src. 2
[Fri Jul 20 17:04:11 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.465628 pixels away
[Fri Jul 20 17:04:11 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 85.108587 pixels away
[Fri Jul 20 17:04:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 17:04:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 17:04:11 2012] Assessing source extent using major
[Fri Jul 20 17:04:11 2012] Source does appear to be extended
[Fri Jul 20 17:04:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 17:24:56 2012] XMMSAS src. selection expression = ellipse(27130.182648, 27016.672180, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 17:24:56 2012] Writing source region out to fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 20 17:24:56 2012] Extracting stamp from image fullrun_mos1_xmm0041741001_pi300-10000_cl_sm2.00.img.gz, (275, 274) - (350, 349)
[Fri Jul 20 17:24:56 2012] XMMSAS bgd. selection expression = annulus(27130.182648, 27016.672180, 1087.500000, 2175.000000, X, Y) && !ellipse(27418.694000, 27537.000000, 336.616010, 336.616010, 0.000000, X, Y)
[Fri Jul 20 17:24:56 2012] Writing fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src1.gif
[Fri Jul 20 17:25:07 2012] Mean detx,y = (385.38, -627.61) 
[Fri Jul 20 17:25:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 17:25:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 17:25:16 2012] Setting source spectrum file to fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 17:25:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 20 17:28:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 20 17:28:54 2012] rmf not generated due to insufficient counts
[Fri Jul 20 17:33:18 2012] Updating aperture counts using extracted products
[Fri Jul 20 17:33:18 2012] Error reading totcts from fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 17:33:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 17:33:18 2012] Using photon index=1.80, rate=0.0597, arf fullrun_mos1_xmm0041741001_pi300-10000_pass1_cl_src1.arf
[Fri Jul 20 17:33:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 17:33:18 2012] Updating source flux to 7.1e-13
[Fri Jul 20 17:33:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting