[Tue Jul 10 10:08:12 2012] Detection parameters:
  Position = (316.7, 317.9) = 21 6 54.89 38 45 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1272.8 +/- 42.4
  Background counts = 4.1
  Rate = 0.1 +/- 0.005

[Tue Jul 10 10:08:12 2012] Off-axis axis estimate = 1.94'
[Tue Jul 10 10:29:04 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 10:29:04 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Tue Jul 10 10:29:04 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.826
[Tue Jul 10 10:29:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.40"
[Tue Jul 10 10:46:31 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 10 10:46:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 10 10:46:31 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 10 10:46:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 10 10:46:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 10:46:31 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 10 10:46:31 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 10 10:46:31 2012] Fit fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul 10 11:00:33 2012] Spatial fit model total counts = 1235.950000, observed total counts = 1296.000000
[Tue Jul 10 11:00:33 2012] Offset between fit and detection position for source 2 = 0.206002 pixels
[Tue Jul 10 11:00:33 2012] 1220.524000 total counts/ 356.339000 bgd. counts: snr = 45.779922
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.206002 pixels
  Position = (316.5, 317.9) = 21 6 54.97 38 45 6.0
  Extent = 5.3 (5.0-5.6)", rotation angle = 0
  Source counts = 864.2 +/- 34.9
  Background counts = 356.3
  Rate = 0.09 +/- 0.004
[Tue Jul 10 11:00:33 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 11:00:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 11:00:33 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 11:00:33 2012] Source does appear to be extended
[Tue Jul 10 11:00:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 11:12:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 10 11:12:05 2012] Initial guess for spatial extent in simple fitting = 5.28"
[Tue Jul 10 11:12:05 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.020
[Tue Jul 10 11:12:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.28"
[Tue Jul 10 11:19:57 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 10 11:19:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_src1.csv
[Tue Jul 10 11:19:57 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 10 11:19:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_src1.csv
[Tue Jul 10 11:19:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 11:19:57 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 10 11:19:57 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 10 11:19:57 2012] Fit fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul 10 11:28:58 2012] Spatial fit model total counts = 1255.810000, observed total counts = 1310.000000
[Tue Jul 10 11:28:58 2012] Offset between fit and detection position for source 2 = 0.001246 pixels
[Tue Jul 10 11:28:58 2012] 1237.885000 total counts/ 368.128000 bgd. counts: snr = 45.331335
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001246 pixels
  Position = (316.5, 317.9) = 21 6 54.97 38 45 6.0
  Extent = 5.3 (5.0-5.7)", rotation angle = 0
  Source counts = 869.8 +/- 35.2
  Background counts = 368.1
  Rate = 0.09 +/- 0.004
[Tue Jul 10 11:28:58 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 11:28:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 11:28:58 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 11:28:58 2012] Source does appear to be extended
[Tue Jul 10 11:28:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 12:21:12 2012] XMMSAS src. selection expression = ellipse(27490.106800, 27604.544440, 319.176609, 319.176609, 0.000000, X, Y)
[Tue Jul 10 12:21:12 2012] Writing source region out to fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src2_src.reg
[Tue Jul 10 12:21:12 2012] Extracting stamp from image fullrun_mos1_xmm0041740301_pi300-10000_cl_sm2.00.img.gz, (298, 300) - (335, 336)
[Tue Jul 10 12:21:12 2012] XMMSAS bgd. selection expression = annulus(27490.106800, 27604.544440, 531.961015, 1063.922031, X, Y) && !ellipse(27174.388885, 26863.885864, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 10 12:21:12 2012] Writing fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src2.gif
[Tue Jul 10 12:21:14 2012] Mean detx,y = (705.68, -449.07) 
[Tue Jul 10 12:21:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 12:21:22 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 12:21:23 2012] Setting source spectrum file to fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul 10 12:21:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jul 10 12:30:10 2012] Updating aperture counts using extracted products
[Tue Jul 10 12:30:10 2012] Error reading totcts from fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul 10 12:30:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 12:30:10 2012] Using photon index=1.80, rate=0.0938, arf fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src2.arf
[Tue Jul 10 12:30:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 12:30:11 2012] Updating source flux to 1.3e-12
[Tue Jul 10 12:30:26 2012] Reading fit data from xmm0041740301/analysis//spectral/fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src2_pl.csv
[Tue Jul 10 12:30:26 2012] Spectral fit parameter nH value = 5.32802e+21
[Tue Jul 10 12:30:26 2012] Spectral fit parameter PhoIndex value = 7.19036
[Tue Jul 10 12:30:26 2012] Failed to get F(0.3-8.0) from xmm0041740301/analysis//spectral/fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jul 10 12:30:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 12:30:26 2012] Using Nh = 5.3e+21, photon index=7.19, rate=0.0938, arf fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src2.arf
[Tue Jul 10 12:30:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 12:30:26 2012] Updating source flux to 8.7e-13