[Tue Jul 10 10:08:12 2012] Detection parameters:
  Position = (312.9, 309.3) = 21 6 56.32 38 44 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.8 +/- 21.8
  Background counts = 4.0
  Rate = 0.03 +/- 0.003

[Tue Jul 10 10:08:12 2012] Off-axis axis estimate = 1.31'
[Tue Jul 10 10:29:04 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 10:29:04 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Tue Jul 10 10:29:04 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.883
[Tue Jul 10 10:29:04 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.09"
[Tue Jul 10 10:46:31 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jul 10 10:46:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_src2.csv
[Tue Jul 10 10:46:31 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jul 10 10:46:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_src2.csv
[Tue Jul 10 10:46:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 10:46:31 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jul 10 10:46:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jul 10 10:46:31 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jul 10 10:46:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jul 10 10:46:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041740301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 11:00:33 2012] Spatial fit model total counts = -110.158000, observed total counts = 658.000000
[Tue Jul 10 11:00:33 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 10 11:00:33 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 11:00:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 11:00:33 2012] Assessing source extent using major
[Tue Jul 10 11:00:33 2012] Source does appear to be extended
[Tue Jul 10 11:00:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 11:12:05 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 11:12:05 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Tue Jul 10 11:12:05 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.883
[Tue Jul 10 11:12:05 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.09"
[Tue Jul 10 11:19:57 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jul 10 11:19:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_src2.csv
[Tue Jul 10 11:19:57 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jul 10 11:19:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_src2.csv
[Tue Jul 10 11:19:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 11:19:57 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jul 10 11:19:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jul 10 11:19:57 2012] fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jul 10 11:19:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jul 10 11:19:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041740301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 11:28:58 2012] Source 1 is offset by -3.604496 and -7.177450 pixels which is larger than
2 X fitted extent = 1.923232 x 1.923232, not incorporating fit results
[Tue Jul 10 11:28:58 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 11:28:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 11:28:58 2012] Assessing source extent using major
[Tue Jul 10 11:28:58 2012] Source does appear to be extended
[Tue Jul 10 11:28:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 12:21:12 2012] XMMSAS src. selection expression = ellipse(27174.388885, 26863.885864, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 10 12:21:12 2012] Writing source region out to fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul 10 12:21:12 2012] Extracting stamp from image fullrun_mos1_xmm0041740301_pi300-10000_cl_sm2.00.img.gz, (275, 272) - (350, 347)
[Tue Jul 10 12:21:12 2012] XMMSAS bgd. selection expression = annulus(27174.388885, 26863.885864, 1087.500000, 2175.000000, X, Y) && !ellipse(27490.106800, 27604.544440, 425.568812, 425.568812, 0.000000, X, Y)
[Tue Jul 10 12:21:12 2012] Writing fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src1.gif
[Tue Jul 10 12:21:25 2012] Mean detx,y = (168.51, -514.29) 
[Tue Jul 10 12:21:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 12:21:36 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 12:21:36 2012] Setting source spectrum file to fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 10 12:21:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul 10 12:25:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 10 12:25:32 2012] rmf not generated due to insufficient counts
[Tue Jul 10 12:30:10 2012] Updating aperture counts using extracted products
[Tue Jul 10 12:30:10 2012] Error reading totcts from fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 10 12:30:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 12:30:11 2012] Using photon index=1.80, rate=0.0273, arf fullrun_mos1_xmm0041740301_pi300-10000_pass1_cl_src1.arf
[Tue Jul 10 12:30:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 12:30:11 2012] Updating source flux to 3.4e-13
[Tue Jul 10 12:30:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting