[Mon Jun 18 10:04:33 2012] Detection parameters:
  Position = (280.3, 289.0) = 21 6 54.66 38 45 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.3 +/- 7.5
  Background counts = 3.1
  Rate = 0.09 +/- 0.02

[Mon Jun 18 10:04:33 2012] Off-axis axis estimate = 1.48'
[Mon Jun 18 10:14:23 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 10:14:23 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Mon Jun 18 10:14:23 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.867
[Mon Jun 18 10:14:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.17"
[Mon Jun 18 10:20:38 2012] fullrun_mos2_xmm0041740101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 18 10:20:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041740101_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 10:20:38 2012] fullrun_mos2_xmm0041740101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 18 10:20:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041740101_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 10:20:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041740101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041740101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 10:20:38 2012] fullrun_mos2_xmm0041740101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 18 10:20:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041740101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 18 10:20:38 2012] fullrun_mos2_xmm0041740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 18 10:20:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041740101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 18 10:20:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041740101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 10:20:41 2012] Source 2 is offset by -6.272502 and -7.545451 pixels which is larger than
2 X fitted extent = 0.823945 x 0.823945, not incorporating fit results
[Mon Jun 18 10:20:41 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 10:20:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 10:20:41 2012] Assessing source extent using major
[Mon Jun 18 10:20:41 2012] Source does appear to be extended
[Mon Jun 18 10:20:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 10:20:41 2012] Source is confused with source 1
[Mon Jun 18 10:33:38 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 10:33:38 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Mon Jun 18 10:33:38 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.867
[Mon Jun 18 10:33:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.17"
[Mon Jun 18 10:38:25 2012] fullrun_mos2_xmm0041740101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 18 10:38:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041740101_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 10:38:25 2012] fullrun_mos2_xmm0041740101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 18 10:38:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041740101_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 10:38:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041740101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041740101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 10:38:25 2012] fullrun_mos2_xmm0041740101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 18 10:38:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041740101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 18 10:38:25 2012] fullrun_mos2_xmm0041740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 18 10:38:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041740101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 18 10:38:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041740101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 10:38:27 2012] Source 2 is offset by -6.272502 and -7.545451 pixels which is larger than
2 X fitted extent = 0.823945 x 0.823945, not incorporating fit results
[Mon Jun 18 10:38:27 2012] Spatial fit model total counts = 75.345000, observed total counts = 68.000000
[Mon Jun 18 10:38:27 2012] Offset between fit and detection position for source 2 = 0.155552 pixels
[Mon Jun 18 10:38:27 2012] Warning, changing simple spatial fit ID from 1 to 2
[Mon Jun 18 10:38:27 2012] 76.427100 total counts/ 59.113500 bgd. counts: snr = 2.251874
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.155552 pixels
  Position = (280.2, 289.2) = 21 6 54.70 38 45 5.1
  Extent = 3.6 (2.5-5.0)", rotation angle = 0
  Source counts = 17.3 +/- 8.7
  Background counts = 59.1
  Rate = 0.04 +/- 0.02
[Mon Jun 18 10:38:27 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 10:38:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 10:38:27 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 10:38:27 2012] Source does appear to be extended
[Mon Jun 18 10:38:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 10:44:58 2012] XMMSAS src. selection expression = ellipse(24330.360000, 25108.708000, 215.435406, 215.435406, 0.000000, X, Y)
[Mon Jun 18 10:44:58 2012] Writing source region out to fullrun_mos2_xmm0041740101_pi300-10000_pass1_cl_src2_src.reg
[Mon Jun 18 10:44:58 2012] Extracting stamp from image fullrun_mos2_xmm0041740101_pi300-10000_cl_sm2.00.img.gz, (268, 277) - (293, 302)
[Mon Jun 18 10:44:58 2012] XMMSAS bgd. selection expression = annulus(24330.360000, 25108.708000, 359.059010, 718.118021, X, Y) && !ellipse(24025.362183, 24607.732239, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 18 10:44:58 2012] Writing fullrun_mos2_xmm0041740101_pi300-10000_pass1_cl_src2.gif
[Mon Jun 18 10:44:59 2012] Mean detx,y = (-61.19, -375.05) 
[Mon Jun 18 10:45:02 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 10:45:08 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 10:45:08 2012] Setting source spectrum file to fullrun_mos2_xmm0041740101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jun 18 10:45:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0041740101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Jun 18 10:45:25 2012] Not generating rmf since there are only 17 counts
[Mon Jun 18 10:45:25 2012] rmf not generated due to insufficient counts
[Mon Jun 18 10:45:57 2012] Updating aperture counts using extracted products
[Mon Jun 18 10:45:58 2012] Error reading totcts from fullrun_mos2_xmm0041740101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jun 18 10:45:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 10:45:58 2012] Using photon index=1.80, rate=0.0445, arf fullrun_mos2_xmm0041740101_pi300-10000_pass1_cl_src2.arf
[Mon Jun 18 10:45:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 10:45:58 2012] Updating source flux to 8.7e-13
[Mon Jun 18 10:45:59 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Mon Jun 18 10:45:59 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon Jun 18 10:45:59 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 18 10:46:00 2012] xmm0041740101/analysis//spectral/fullrun_mos2_xmm0041740101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete