[Fri Aug  3 11:41:33 2012] Detection parameters:
  Position = (458.2, 263.1) = 13 28 33.52 11 45 20.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5028.5 +/- 84.9
  Background counts = 20.1
  Rate = 0.2 +/- 0.003

[Fri Aug  3 11:41:34 2012] Off-axis axis estimate = 11.86'
[Fri Aug  3 12:52:50 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 12:52:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 12:52:50 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Fri Aug  3 12:52:50 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.941
[Fri Aug  3 12:52:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.36"
[Fri Aug  3 13:21:30 2012] fullrun_mos1_xmm0041180801_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug  3 13:21:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041180801_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 13:21:30 2012] fullrun_mos1_xmm0041180801_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug  3 13:21:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041180801_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 13:21:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041180801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041180801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 13:21:30 2012] fullrun_mos1_xmm0041180801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug  3 13:21:30 2012] fullrun_mos1_xmm0041180801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug  3 13:21:30 2012] Fit fullrun_mos1_xmm0041180801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug  3 13:40:21 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.818649 pixels away
[Fri Aug  3 13:40:21 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 13:40:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 13:40:21 2012] Assessing source extent using major
[Fri Aug  3 13:40:21 2012] Source does appear to be extended
[Fri Aug  3 13:40:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 14:33:44 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 14:33:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 14:33:44 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Fri Aug  3 14:33:44 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.941
[Fri Aug  3 14:33:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.36"
[Fri Aug  3 14:56:56 2012] fullrun_mos1_xmm0041180801_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug  3 14:56:56 2012] fullrun_mos1_xmm0041180801_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug  3 14:56:56 2012] Fit fullrun_mos1_xmm0041180801_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Aug  3 14:56:56 2012] fullrun_mos1_xmm0041180801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug  3 14:56:56 2012] fullrun_mos1_xmm0041180801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug  3 14:56:56 2012] Fit fullrun_mos1_xmm0041180801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug  3 15:10:48 2012] Spatial fit model total counts = 4569.380000, observed total counts = 4545.000000
[Fri Aug  3 15:10:48 2012] Offset between fit and detection position for source 1 = 0.358114 pixels
[Fri Aug  3 15:10:48 2012] 4329.856000 total counts/ 828.136000 bgd. counts: snr = 121.683189
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.358114 pixels
  Position = (457.9, 263.4) = 13 28 33.59 11 45 20.9
  Extent = 8.4" x 4.4", rotation angle = 90
  Source counts = 3501.7 +/- 65.8
  Background counts = 828.1
  Rate = 0.2 +/- 0.003
[Fri Aug  3 15:10:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 15:10:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 15:10:48 2012] Assessing source extent using major
[Fri Aug  3 15:10:48 2012] Source does appear to be extended
[Fri Aug  3 15:10:48 2012] Computing asymmetry using major and minor axis, asym = 1.88
[Fri Aug  3 15:10:48 2012] Source is asymmetric
[Fri Aug  3 15:56:50 2012] Counts = 3501.720000, rescaling region sizes by 2.000000
[Fri Aug  3 15:56:50 2012] XMMSAS src. selection expression = ellipse(39790.085053, 22864.349207, 1004.425943, 533.952093, 90.000000, X, Y)
[Fri Aug  3 15:56:50 2012] Writing source region out to fullrun_mos1_xmm0041180801_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug  3 15:56:50 2012] Extracting stamp from image fullrun_mos1_xmm0041180801_pi300-10000_cl_sm2.00.img.gz, (400, 206) - (516, 321)
[Fri Aug  3 15:56:50 2012] XMMSAS bgd. selection expression = annulus(39790.085053, 22864.349207, 3348.086477, 6696.172954, X, Y) && !ellipse(33553.078186, 21402.977798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37841.716400, 29348.441400, 490.683214, 490.683214, 0.000000, X, Y) && !ellipse(37991.436200, 17694.692800, 686.981620, 686.981620, 0.000000, X, Y)
[Fri Aug  3 15:56:50 2012] Writing fullrun_mos1_xmm0041180801_pi300-10000_pass1_cl_src1.gif
[Fri Aug  3 15:56:53 2012] Mean detx,y = (7635.15, -12316.39) 
[Fri Aug  3 15:56:54 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 15:57:58 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 15:57:59 2012] Setting source spectrum file to fullrun_mos1_xmm0041180801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  3 15:57:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0041180801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug  3 16:25:13 2012] Updating aperture counts using extracted products
[Fri Aug  3 16:25:13 2012] Error reading totcts from fullrun_mos1_xmm0041180801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  3 16:25:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 16:25:13 2012] Using photon index=1.80, rate=0.155, arf fullrun_mos1_xmm0041180801_pi300-10000_pass1_cl_src1.arf
[Fri Aug  3 16:25:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 16:25:13 2012] Updating source flux to 4.3e-12
[Fri Aug  3 16:25:38 2012] Reading fit data from xmm0041180801/analysis//spectral/fullrun_mos1_xmm0041180801_pi300-10000_pass1_cl_src1_pl.csv
[Fri Aug  3 16:25:38 2012] Spectral fit parameter nH value = 2.56981e+20
[Fri Aug  3 16:25:38 2012] Spectral fit parameter PhoIndex value = 2.42941
[Fri Aug  3 16:25:38 2012] Failed to get F(0.3-8.0) from xmm0041180801/analysis//spectral/fullrun_mos1_xmm0041180801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Aug  3 16:25:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 16:25:38 2012] Using Nh = 2.6e+20, photon index=2.43, rate=0.155, arf fullrun_mos1_xmm0041180801_pi300-10000_pass1_cl_src1.arf
[Fri Aug  3 16:25:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 16:25:38 2012] Updating source flux to 3.5e-12