[Sun Sep 25 22:16:56 2011] Detection parameters:
  Position = (284.1, 339.7) = 13 53 26.10 40 17 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 644.5 +/- 31.6
  Background counts = 34.5
  Rate = 0.05 +/- 0.002

[Sun Sep 25 22:16:57 2011] Off-axis axis estimate = 3.17'
[Sun Sep 25 22:18:53 2011] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 22:18:53 2011] Initial guess for spatial extent in simple fitting = 8.01"
[Sun Sep 25 22:18:53 2011] source mask rpix=1.8, npix_max = 21, mask sum = 10, frac = 0.456
[Sun Sep 25 22:18:53 2011] Skipping simple spatial due to low active detector fraction
[Mon Sep 26 00:33:41 2011] Spatial fit model total counts = 1336.820000, observed total counts = 1339.000000
[Mon Sep 26 00:33:41 2011] Offset between fit and detection position for source 3 = 2.138003 pixels
[Mon Sep 26 00:33:41 2011] Warning, changing simple spatial fit ID from -1 to 1
[Mon Sep 26 00:33:41 2011] 1302.344000 total counts/ 219.844000 bgd. counts: snr = 73.008024
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.138003 pixels
  Position = (283.2, 337.8) = 13 53 26.48 40 17 0.9
  Extent = 15.7 (15.7-31.4)", rotation angle = 0
  Source counts = 1082.5 +/- 36.1
  Background counts = 219.8
  Rate = 0.06 +/- 0.002
[Mon Sep 26 00:33:41 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 00:33:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 00:33:41 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 00:33:41 2011] Source does appear to be extended
[Mon Sep 26 00:33:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 00:33:41 2011] Source is confused with source 1
[Mon Sep 26 00:34:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 00:34:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 00:34:01 2011] Initial guess for spatial extent in simple fitting = 15.71"
[Mon Sep 26 00:34:01 2011] source mask rpix=3.6, npix_max = 67, mask sum = 24, frac = 0.355
[Mon Sep 26 00:34:01 2011] Skipping simple spatial due to low active detector fraction
[Mon Sep 26 02:37:09 2011] Spatial fit model total counts = 1338.940000, observed total counts = 1339.000000
[Mon Sep 26 02:37:09 2011] Offset between fit and detection position for source 3 = 0.476247 pixels
[Mon Sep 26 02:37:09 2011] Warning, changing simple spatial fit ID from -1 to 1
[Mon Sep 26 02:37:09 2011] 1241.765000 total counts/ 171.485000 bgd. counts: snr = 81.730535
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.476247 pixels
  Position = (282.9, 337.4) = 13 53 26.57 40 16 59.1
  Extent = 15.7 (14.6-31.4)", rotation angle = 0
  Source counts = 1070.3 +/- 35.2
  Background counts = 171.5
  Rate = 0.06 +/- 0.002
[Mon Sep 26 02:37:09 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 02:37:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 02:37:09 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 02:37:09 2011] Source does appear to be extended
[Mon Sep 26 02:37:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 02:37:28 2011] Counts = 1070.280000, rescaling region sizes by 2.000000
[Mon Sep 26 02:37:28 2011] XMMSAS src. selection expression = ellipse(24565.889000, 29308.166000, 1884.900054, 1884.900054, 0.000000, X, Y)
[Mon Sep 26 02:37:28 2011] Writing source region out to fullrun_pn_xmm0041180401_pi300-10000_pass1_cl_src3_src.reg
[Mon Sep 26 02:37:28 2011] Extracting stamp from image fullrun_pn_xmm0041180401_pi300-10000_cl_sm2.00.img.gz, (175, 229) - (391, 446)
[Mon Sep 26 02:37:28 2011] XMMSAS bgd. selection expression = annulus(24565.889000, 29308.166000, 6283.000181, 12566.000362, X, Y) && !ellipse(24400.408966, 28982.094788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16377.815160, 26083.492600, 510.979954, 510.979954, 0.000000, X, Y) && !ellipse(16177.447372, 36504.700806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25664.464000, 35101.308000, 457.896013, 457.896013, 0.000000, X, Y) && !ellipse(26174.059400, 35029.535800, 472.021614, 472.021614, 0.000000, X, Y) && !ellipse(27158.836230, 34013.886586, 418.812034, 366.335039, 89.302739, X, Y) && !ellipse(17189.636720, 33444.392600, 583.722417, 354.204010, 306.235000, X, Y) && !ellipse(24462.654000, 30617.320000, 632.576818, 632.576818, 0.000000, X, Y) && !ellipse(14557.317963, 30151.298004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15603.609424, 29757.374013, 711.380142, 332.004080, 98.973609, X, Y) && !ellipse(12178.211258, 24063.408752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36767.641632, 22166.164642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16212.077434, 21769.470465, 599.319670, 381.995794, 226.386407, X, Y) && !ellipse(25900.598800, 18671.314400, 487.940814, 487.940814, 0.000000, X, Y) && !ellipse(35052.251099, 17606.324402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23608.610199, 38489.218384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20367.969600, 41045.109800, 383.043211, 383.043211, 0.000000, X, Y) && !ellipse(25147.603241, 35432.706177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20196.468800, 34117.204800, 320.593609, 320.593609, 0.000000, X, Y) && !ellipse(20175.692400, 33328.917600, 426.428012, 426.428012, 0.000000, X, Y) && !ellipse(23403.884000, 31768.988000, 1409.688041, 1409.688041, 0.000000, X, Y) && !ellipse(16297.666000, 30482.998000, 384.162411, 384.162411, 0.000000, X, Y) && !ellipse(25646.714233, 30119.697845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23997.556061, 30135.588196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21133.666229, 29750.271759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22382.236237, 29768.384369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29959.257760, 29619.561200, 483.700844, 483.700844, 0.000000, X, Y) && !ellipse(20652.264000, 29636.712200, 1437.208041, 1437.208041, 0.000000, X, Y) && !ellipse(25814.650600, 29104.643000, 738.544021, 738.544021, 0.000000, X, Y) && !ellipse(28555.954940, 28225.946000, 519.008015, 519.008015, 0.000000, X, Y) && !ellipse(24834.591656, 27787.854353, 726.073621, 726.073621, 0.100000, X, Y) && !ellipse(26748.376224, 26921.867600, 367.907211, 367.907211, 0.000000, X, Y) && !ellipse(29166.916400, 26241.134200, 352.392810, 352.392810, 0.000000, X, Y) && !ellipse(26714.366600, 25618.289200, 419.718823, 419.718823, 0.000000, X, Y) && !ellipse(34774.322632, 25169.008087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29664.542400, 25020.648200, 311.722409, 311.722409, 0.000000, X, Y) && !ellipse(22997.988000, 23840.720000, 338.328010, 338.328010, 0.000000, X, Y) && !ellipse(29471.144000, 22687.067800, 277.882408, 277.882408, 0.000000, X, Y) && !ellipse(34121.788600, 21640.526600, 383.574411, 383.574411, 0.000000, X, Y)
[Mon Sep 26 02:37:28 2011] Writing fullrun_pn_xmm0041180401_pi300-10000_pass1_cl_src3.gif
[Mon Sep 26 02:38:42 2011] Mean detx,y = (822.63, -1753.54) 
[Mon Sep 26 02:38:47 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 02:44:57 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 02:44:57 2011] Setting source spectrum file to fullrun_pn_xmm0041180401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Sep 26 02:44:57 2011] Setting bgd. spectrum file to fullrun_pn_xmm0041180401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Sep 26 06:14:19 2011] Updating aperture counts using extracted products
[Mon Sep 26 06:14:19 2011] Error reading totcts from fullrun_pn_xmm0041180401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Sep 26 06:14:19 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 06:14:19 2011] Using photon index=1.80, rate=0.0559, arf fullrun_pn_xmm0041180401_pi300-10000_pass1_cl_src3.arf
[Mon Sep 26 06:14:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 06:14:19 2011] Updating source flux to 1.7e-13
[Mon Sep 26 06:15:03 2011] Flag c found in src. 3 procflags, skipping spectral fitting