[Sun Sep 25 22:17:39 2011] Detection parameters:
  Position = (308.1, 310.2) = 13 53 17.01 40 15 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.0 +/- 10.5
  Background counts = 9.5
  Rate = 0.003 +/- 0.0005

[Sun Sep 25 22:17:39 2011] Off-axis axis estimate = 1.10'
[Sun Sep 25 23:50:30 2011] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 23:50:30 2011] Initial guess for spatial extent in simple fitting = 6.98"
[Sun Sep 25 23:50:30 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.903
[Sun Sep 25 23:50:30 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 6.98"
[Mon Sep 26 00:33:32 2011] fullrun_mos2_xmm0041180401_pi300-10000_cl_pass0_src12.ximg exists
[Mon Sep 26 00:33:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041180401_pi300-10000_cl_pass0_src12.csv
[Mon Sep 26 00:33:32 2011] fullrun_mos2_xmm0041180401_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Sep 26 00:33:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041180401_pi300-10000_cl_pass0_src12.csv
[Mon Sep 26 00:33:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041180401_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041180401_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 00:33:32 2011] fullrun_mos2_xmm0041180401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Sep 26 00:33:32 2011] fullrun_mos2_xmm0041180401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Sep 26 00:33:32 2011] Fit fullrun_mos2_xmm0041180401_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Sep 26 00:33:51 2011] Spatial fit model total counts = 139.488000, observed total counts = 140.000000
[Mon Sep 26 00:33:51 2011] Offset between fit and detection position for source 25 = 0.385318 pixels
[Mon Sep 26 00:33:51 2011] 138.361400 total counts/ 104.500000 bgd. counts: snr = 3.312430
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.385318 pixels
  Position = (307.8, 310.5) = 13 53 17.11 40 15 1.8
  Extent = 4.0 (2.2-7.5)", rotation angle = 0
  Source counts = 33.9 +/- 11.8
  Background counts = 104.5
  Rate = 0.002 +/- 0.0005
[Mon Sep 26 00:33:51 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 00:33:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 00:33:51 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 00:33:51 2011] Source does appear to be extended
[Mon Sep 26 00:33:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 01:48:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 01:48:23 2011] Initial guess for spatial extent in simple fitting = 4.03"
[Mon Sep 26 01:48:23 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.105
[Mon Sep 26 01:48:23 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 4.03"
[Mon Sep 26 02:37:00 2011] fullrun_mos2_xmm0041180401_pi300-10000_cl_pass1_src12.ximg exists
[Mon Sep 26 02:37:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041180401_pi300-10000_cl_pass1_src12.csv
[Mon Sep 26 02:37:00 2011] fullrun_mos2_xmm0041180401_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Sep 26 02:37:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041180401_pi300-10000_cl_pass1_src12.csv
[Mon Sep 26 02:37:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041180401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041180401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 02:37:00 2011] fullrun_mos2_xmm0041180401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Sep 26 02:37:00 2011] fullrun_mos2_xmm0041180401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Sep 26 02:37:00 2011] Fit fullrun_mos2_xmm0041180401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Sep 26 02:37:18 2011] Spatial fit model total counts = 155.030000, observed total counts = 140.000000
[Mon Sep 26 02:37:18 2011] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep 26 02:37:18 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 02:37:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 02:37:18 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 02:37:18 2011] Source does appear to be extended
[Mon Sep 26 02:37:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:46:16 2011] XMMSAS src. selection expression = ellipse(26731.698740, 26962.283200, 241.894807, 241.894807, 0.000000, X, Y)
[Mon Sep 26 05:46:16 2011] Writing source region out to fullrun_mos2_xmm0041180401_pi300-10000_pass1_cl_src25_src.reg
[Mon Sep 26 05:46:16 2011] Extracting stamp from image fullrun_mos2_xmm0041180401_pi300-10000_cl_sm2.00.img.gz, (294, 297) - (322, 324)
[Mon Sep 26 05:46:16 2011] XMMSAS bgd. selection expression = annulus(26731.698740, 26962.283200, 403.158012, 806.316023, X, Y) && !ellipse(26746.501709, 25619.885162, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep 26 05:46:16 2011] Writing fullrun_mos2_xmm0041180401_pi300-10000_pass1_cl_src25.gif
[Mon Sep 26 05:49:17 2011] Mean detx,y = (-132.74, -1567.78) 
[Mon Sep 26 05:49:18 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 05:49:26 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 05:49:26 2011] Setting source spectrum file to fullrun_mos2_xmm0041180401_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Sep 26 05:49:26 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0041180401_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Mon Sep 26 06:13:12 2011] Not generating rmf since there are only 33 counts
[Mon Sep 26 06:13:12 2011] rmf not generated due to insufficient counts
[Mon Sep 26 06:14:20 2011] Updating aperture counts using extracted products
[Mon Sep 26 06:14:20 2011] Error reading totcts from fullrun_mos2_xmm0041180401_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Sep 26 06:14:20 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 06:14:20 2011] Using photon index=1.80, rate=0.00153, arf fullrun_mos2_xmm0041180401_pi300-10000_pass1_cl_src25.arf
[Mon Sep 26 06:14:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 06:14:20 2011] Updating source flux to 2.8e-14
[Mon Sep 26 06:14:30 2011] Flag p found in src. 25 procflags, skipping spectral fitting
[Mon Sep 26 06:14:30 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting