[Sun Sep 25 22:17:18 2011] Detection parameters:
  Position = (198.9, 314.0) = 13 53 58.50 40 15 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.3 +/- 7.1
  Background counts = 6.2
  Rate = 0.002 +/- 0.0005

[Sun Sep 25 22:17:19 2011] Off-axis axis estimate = 7.31'
[Sun Sep 25 23:18:57 2011] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 23:18:57 2011] Initial guess for spatial extent in simple fitting = 10.08"
[Sun Sep 25 23:18:57 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.134
[Sun Sep 25 23:18:57 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 10.08"
[Sun Sep 25 23:50:29 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_src15.ximg exists
[Sun Sep 25 23:50:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_src15.csv
[Sun Sep 25 23:50:29 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Sep 25 23:50:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_src15.csv
[Sun Sep 25 23:50:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 23:50:30 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Sep 25 23:50:30 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Sep 25 23:50:30 2011] Fit fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Sep 26 00:33:46 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 11.071108 pixels away
[Mon Sep 26 00:33:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 00:33:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 00:33:46 2011] Assessing source extent using major
[Mon Sep 26 00:33:46 2011] Source does appear to be extended
[Mon Sep 26 00:33:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 01:25:04 2011] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 01:25:04 2011] Initial guess for spatial extent in simple fitting = 10.08"
[Mon Sep 26 01:25:04 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.134
[Mon Sep 26 01:25:04 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 10.08"
[Mon Sep 26 01:48:23 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_src15.ximg exists
[Mon Sep 26 01:48:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_src15.csv
[Mon Sep 26 01:48:23 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon Sep 26 01:48:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_src15.csv
[Mon Sep 26 01:48:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 01:48:23 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon Sep 26 01:48:23 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Sep 26 01:48:23 2011] Fit fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Sep 26 02:37:13 2011] Spatial fit model total counts = 86.841200, observed total counts = 85.000000
[Mon Sep 26 02:37:13 2011] Offset between fit and detection position for source 19 = 0.027514 pixels
[Mon Sep 26 02:37:13 2011] 90.129500 total counts/ 72.481700 bgd. counts: snr = 2.072891
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.027514 pixels
  Position = (198.9, 314.1) = 13 53 58.51 40 15 17.1
  Extent = 4.2 (2.9-7.8)", rotation angle = 0
  Source counts = 17.6 +/- 9.5
  Background counts = 72.5
  Rate = 0.0008 +/- 0.0004
[Mon Sep 26 02:37:13 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 02:37:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 02:37:13 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 02:37:13 2011] Source does appear to be extended
[Mon Sep 26 02:37:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:35:46 2011] XMMSAS src. selection expression = ellipse(17252.831400, 27275.282400, 253.444207, 253.444207, 0.000000, X, Y)
[Mon Sep 26 05:35:46 2011] Writing source region out to fullrun_mos1_xmm0041180401_pi300-10000_pass1_cl_src19_src.reg
[Mon Sep 26 05:35:46 2011] Extracting stamp from image fullrun_mos1_xmm0041180401_pi300-10000_cl_sm2.00.img.gz, (184, 300) - (213, 329)
[Mon Sep 26 05:35:46 2011] XMMSAS bgd. selection expression = annulus(17252.831400, 27275.282400, 422.407012, 844.814024, X, Y) && !ellipse(16381.649658, 26112.058563, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep 26 05:35:46 2011] Writing fullrun_mos1_xmm0041180401_pi300-10000_pass1_cl_src19.gif
[Mon Sep 26 05:39:11 2011] Mean detx,y = (6115.56, -5859.96) 
[Mon Sep 26 05:39:11 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 05:39:20 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 05:39:20 2011] Setting source spectrum file to fullrun_mos1_xmm0041180401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Sep 26 05:39:20 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0041180401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Sep 26 05:45:57 2011] Not generating rmf since there are only 17 counts
[Mon Sep 26 05:45:57 2011] rmf not generated due to insufficient counts
[Mon Sep 26 06:14:19 2011] Updating aperture counts using extracted products
[Mon Sep 26 06:14:19 2011] Error reading totcts from fullrun_mos1_xmm0041180401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Sep 26 06:14:20 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 06:14:20 2011] Using photon index=1.80, rate=0.000796, arf fullrun_mos1_xmm0041180401_pi300-10000_pass1_cl_src19.arf
[Mon Sep 26 06:14:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 06:14:20 2011] Updating source flux to 2.1e-14
[Mon Sep 26 06:14:21 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting