[Sun Sep 25 22:17:18 2011] Detection parameters:
  Position = (188.9, 300.7) = 13 54 2.30 40 14 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.5 +/- 14.8
  Background counts = 6.0
  Rate = 0.01 +/- 0.001

[Sun Sep 25 22:17:19 2011] Off-axis axis estimate = 7.95'
[Sun Sep 25 23:18:57 2011] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 23:18:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 23:18:57 2011] Initial guess for spatial extent in simple fitting = 10.40"
[Sun Sep 25 23:18:57 2011] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.047
[Sun Sep 25 23:18:57 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.40"
[Sun Sep 25 23:50:29 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_src2.ximg exists
[Sun Sep 25 23:50:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_src2.csv
[Sun Sep 25 23:50:29 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Sep 25 23:50:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_src2.csv
[Sun Sep 25 23:50:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 23:50:29 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Sep 25 23:50:29 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Sep 25 23:50:29 2011] Fit fullrun_mos1_xmm0041180401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Sep 26 00:33:46 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.207950 pixels away
[Mon Sep 26 00:33:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 00:33:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 00:33:46 2011] Assessing source extent using major
[Mon Sep 26 00:33:46 2011] Source does appear to be extended
[Mon Sep 26 00:33:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 01:25:04 2011] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 01:25:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 01:25:04 2011] Initial guess for spatial extent in simple fitting = 10.40"
[Mon Sep 26 01:25:04 2011] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.047
[Mon Sep 26 01:25:04 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 10.40"
[Mon Sep 26 01:48:23 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_src2.ximg exists
[Mon Sep 26 01:48:23 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Sep 26 01:48:23 2011] Fit fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_src2 appears to have run properly
[Mon Sep 26 01:48:23 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Sep 26 01:48:23 2011] fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Sep 26 01:48:23 2011] Fit fullrun_mos1_xmm0041180401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Sep 26 02:37:13 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.207950 pixels away
[Mon Sep 26 02:37:13 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 02:37:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 02:37:13 2011] Assessing source extent using major
[Mon Sep 26 02:37:13 2011] Source does appear to be extended
[Mon Sep 26 02:37:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:35:46 2011] XMMSAS src. selection expression = ellipse(16381.649658, 26112.058563, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Sep 26 05:35:46 2011] Writing source region out to fullrun_mos1_xmm0041180401_pi300-10000_pass1_cl_src1_src.reg
[Mon Sep 26 05:35:46 2011] Extracting stamp from image fullrun_mos1_xmm0041180401_pi300-10000_cl_sm2.00.img.gz, (151, 263) - (226, 338)
[Mon Sep 26 05:35:46 2011] XMMSAS bgd. selection expression = annulus(16381.649658, 26112.058563, 1087.500000, 2175.000000, X, Y) && !ellipse(17252.831400, 27275.282400, 337.925610, 337.925610, 0.000000, X, Y)
[Mon Sep 26 05:35:46 2011] Writing fullrun_mos1_xmm0041180401_pi300-10000_pass1_cl_src1.gif
[Mon Sep 26 05:35:59 2011] Mean detx,y = (6047.77, -7359.85) 
[Mon Sep 26 05:36:00 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 05:36:26 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 05:36:26 2011] Setting source spectrum file to fullrun_mos1_xmm0041180401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Sep 26 05:36:26 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0041180401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Sep 26 05:45:34 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Sep 26 05:45:34 2011] rmf not generated due to insufficient counts
[Mon Sep 26 06:14:19 2011] Updating aperture counts using extracted products
[Mon Sep 26 06:14:19 2011] Error reading totcts from fullrun_mos1_xmm0041180401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Sep 26 06:14:19 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 06:14:19 2011] Using photon index=1.80, rate=0.0129, arf fullrun_mos1_xmm0041180401_pi300-10000_pass1_cl_src1.arf
[Mon Sep 26 06:14:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 06:14:19 2011] Updating source flux to 2.8e-13
[Mon Sep 26 06:14:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting