[Sun Jul 15 20:15:50 2012] Detection parameters:
  Position = (288.0, 299.8) = 10 0 13.33 -19 36 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 490.0 +/- 28.5
  Background counts = 39.9
  Rate = 0.03 +/- 0.002

[Sun Jul 15 20:15:50 2012] Off-axis axis estimate = 0.77'
[Sun Jul 15 20:17:49 2012] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 20:17:49 2012] Initial guess for spatial extent in simple fitting = 6.81"
[Sun Jul 15 20:17:49 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.937
[Sun Jul 15 20:17:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.81"
[Sun Jul 15 20:44:41 2012] fullrun_pn_xmm0041180301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 15 20:44:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041180301_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 20:44:41 2012] fullrun_pn_xmm0041180301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 15 20:44:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041180301_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 20:44:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041180301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041180301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 20:44:42 2012] fullrun_pn_xmm0041180301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 15 20:44:42 2012] fullrun_pn_xmm0041180301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 15 20:44:42 2012] Fit fullrun_pn_xmm0041180301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 15 21:59:44 2012] Spatial fit model total counts = 977.999000, observed total counts = 978.000000
[Sun Jul 15 21:59:44 2012] Offset between fit and detection position for source 1 = 0.198168 pixels
[Sun Jul 15 21:59:44 2012] 954.087000 total counts/ 639.772000 bgd. counts: snr = 12.426605
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.198168 pixels
  Position = (287.8, 299.7) = 10 0 13.38 -19 36 36.4
  Extent = 5.8 (5.2-6.4)", rotation angle = 0
  Source counts = 314.3 +/- 30.9
  Background counts = 639.8
  Rate = 0.02 +/- 0.002
[Sun Jul 15 21:59:44 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 21:59:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 21:59:44 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 21:59:44 2012] Source does appear to be extended
[Sun Jul 15 21:59:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 21:59:44 2012] Source is confused with source 17
[Sun Jul 15 21:59:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 21:59:59 2012] Initial guess for spatial extent in simple fitting = 5.78"
[Sun Jul 15 21:59:59 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.898
[Sun Jul 15 21:59:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.78"
[Sun Jul 15 22:18:35 2012] fullrun_pn_xmm0041180301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 15 22:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041180301_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 22:18:35 2012] fullrun_pn_xmm0041180301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 15 22:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041180301_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 22:18:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041180301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041180301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 22:18:36 2012] fullrun_pn_xmm0041180301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 15 22:18:36 2012] fullrun_pn_xmm0041180301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 15 22:18:36 2012] Fit fullrun_pn_xmm0041180301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 15 23:43:22 2012] Spatial fit model total counts = 1016.000000, observed total counts = 1016.000000
[Sun Jul 15 23:43:22 2012] Offset between fit and detection position for source 1 = 0.014258 pixels
[Sun Jul 15 23:43:22 2012] 982.584000 total counts/ 666.802000 bgd. counts: snr = 12.228943
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014258 pixels
  Position = (287.8, 299.7) = 10 0 13.37 -19 36 36.3
  Extent = 5.8 (5.2-6.4)", rotation angle = 0
  Source counts = 315.8 +/- 31.3
  Background counts = 666.8
  Rate = 0.02 +/- 0.002
[Sun Jul 15 23:43:22 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 23:43:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 23:43:22 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 23:43:22 2012] Source does appear to be extended
[Sun Jul 15 23:43:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 23:43:34 2012] XMMSAS src. selection expression = ellipse(24990.315160, 26022.953400, 347.491810, 347.491810, 0.000000, X, Y)
[Sun Jul 15 23:43:34 2012] Writing source region out to fullrun_pn_xmm0041180301_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 15 23:43:34 2012] Extracting stamp from image fullrun_pn_xmm0041180301_pi300-10000_cl_sm2.00.img.gz, (268, 280) - (308, 320)
[Sun Jul 15 23:43:34 2012] XMMSAS bgd. selection expression = annulus(24990.315160, 26022.953400, 579.153017, 1158.306033, X, Y) && !ellipse(24785.779600, 24122.547340, 803.184023, 803.184023, 0.000000, X, Y) && !ellipse(25163.631653, 25431.439148, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 15 23:43:34 2012] Writing fullrun_pn_xmm0041180301_pi300-10000_pass1_cl_src1.gif
[Sun Jul 15 23:43:44 2012] Mean detx,y = (-212.52, 1880.28) 
[Sun Jul 15 23:43:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 23:43:55 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 23:43:56 2012] Setting source spectrum file to fullrun_pn_xmm0041180301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 15 23:43:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0041180301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 16 01:08:04 2012] Updating aperture counts using extracted products
[Mon Jul 16 01:08:05 2012] Error reading totcts from fullrun_pn_xmm0041180301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 16 01:08:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 01:08:05 2012] Using photon index=1.80, rate=0.0171, arf fullrun_pn_xmm0041180301_pi300-10000_pass1_cl_src1.arf
[Mon Jul 16 01:08:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 01:08:05 2012] Updating source flux to 5.3e-14
[Mon Jul 16 01:10:01 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Jul 16 01:11:08 2012] Reading fit data from xmm0041180301/analysis//spectral/fullrun_pn_xmm0041180301_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 16 01:11:08 2012] Spectral fit parameter nH value = 1.14774e+21
[Mon Jul 16 01:11:08 2012] Spectral fit parameter PhoIndex value = 1.86656
[Mon Jul 16 01:11:08 2012] Failed to get F(0.3-8.0) from xmm0041180301/analysis//spectral/fullrun_pn_xmm0041180301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 16 01:11:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 01:11:08 2012] Using Nh = 1.1e+21, photon index=1.87, rate=0.0171, arf fullrun_pn_xmm0041180301_pi300-10000_pass1_cl_src1.arf
[Mon Jul 16 01:11:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 01:11:08 2012] Updating source flux to 6.4e-14