[Sun Jul 15 20:16:34 2012] Detection parameters:
  Position = (213.2, 408.3) = 10 0 36.32 -19 28 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.5 +/- 11.3
  Background counts = 8.5
  Rate = 0.007 +/- 0.001

[Sun Jul 15 20:16:34 2012] Off-axis axis estimate = 10.08'
[Sun Jul 15 21:21:01 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 21:21:01 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Sun Jul 15 21:21:01 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.915
[Sun Jul 15 21:21:01 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.47"
[Sun Jul 15 21:59:39 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jul 15 21:59:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_src5.csv
[Sun Jul 15 21:59:39 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jul 15 21:59:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_src5.csv
[Sun Jul 15 21:59:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 21:59:39 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jul 15 21:59:39 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jul 15 21:59:39 2012] Fit fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jul 15 21:59:52 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 15.575247 pixels away
[Sun Jul 15 21:59:52 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 21:59:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 21:59:52 2012] Assessing source extent using major
[Sun Jul 15 21:59:52 2012] Source does appear to be extended
[Sun Jul 15 21:59:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 23:07:47 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 23:07:47 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Sun Jul 15 23:07:47 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.915
[Sun Jul 15 23:07:47 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.47"
[Sun Jul 15 23:43:18 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jul 15 23:43:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_src5.csv
[Sun Jul 15 23:43:18 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jul 15 23:43:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_src5.csv
[Sun Jul 15 23:43:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 23:43:18 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jul 15 23:43:18 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jul 15 23:43:18 2012] Fit fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jul 15 23:43:28 2012] Spatial fit model total counts = 156.045000, observed total counts = 156.000000
[Sun Jul 15 23:43:28 2012] Offset between fit and detection position for source 23 = 0.282371 pixels
[Sun Jul 15 23:43:28 2012] 156.441400 total counts/ 111.291000 bgd. counts: snr = 4.279880
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.282371 pixels
  Position = (213.0, 408.4) = 10 0 36.39 -19 28 43.2
  Extent = 4.7 (3.4-6.9)", rotation angle = 0
  Source counts = 45.2 +/- 12.5
  Background counts = 111.3
  Rate = 0.002 +/- 0.0006
[Sun Jul 15 23:43:28 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 23:43:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 23:43:28 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 23:43:28 2012] Source does appear to be extended
[Sun Jul 15 23:43:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 00:56:28 2012] XMMSAS src. selection expression = ellipse(18478.684020, 35483.698000, 281.954408, 281.954408, 0.000000, X, Y)
[Mon Jul 16 00:56:28 2012] Writing source region out to fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src23_src.reg
[Mon Jul 16 00:56:28 2012] Extracting stamp from image fullrun_mos2_xmm0041180301_pi300-10000_cl_sm2.00.img.gz, (197, 392) - (229, 425)
[Mon Jul 16 00:56:28 2012] XMMSAS bgd. selection expression = annulus(18478.684020, 35483.698000, 469.924014, 939.848027, X, Y)
[Mon Jul 16 00:56:28 2012] Writing fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src23.gif
[Mon Jul 16 00:57:18 2012] Mean detx,y = (-2725.36, -13100.61) 
[Mon Jul 16 00:57:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 00:57:26 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 00:57:26 2012] Setting source spectrum file to fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Jul 16 00:57:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Jul 16 01:04:26 2012] Not generating rmf since there are only 45 counts
[Mon Jul 16 01:04:26 2012] rmf not generated due to insufficient counts
[Mon Jul 16 01:08:05 2012] Updating aperture counts using extracted products
[Mon Jul 16 01:08:05 2012] Error reading totcts from fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Jul 16 01:08:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 01:08:06 2012] Using photon index=1.80, rate=0.00214, arf fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src23.arf
[Mon Jul 16 01:08:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 01:08:06 2012] Updating source flux to 6.1e-14
[Mon Jul 16 01:09:53 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting