[Sun Jul 15 20:16:34 2012] Detection parameters:
  Position = (288.0, 299.8) = 10 0 13.30 -19 36 35.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.8 +/- 17.5
  Background counts = 14.1
  Rate = 0.009 +/- 0.0008

[Sun Jul 15 20:16:34 2012] Off-axis axis estimate = 0.76'
[Sun Jul 15 21:21:01 2012] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 21:21:01 2012] Initial guess for spatial extent in simple fitting = 6.81"
[Sun Jul 15 21:21:01 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.938
[Sun Jul 15 21:21:01 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 6.81"
[Sun Jul 15 21:59:39 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jul 15 21:59:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_src4.csv
[Sun Jul 15 21:59:39 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jul 15 21:59:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_src4.csv
[Sun Jul 15 21:59:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 21:59:39 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jul 15 21:59:39 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jul 15 21:59:39 2012] Fit fullrun_mos2_xmm0041180301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Jul 15 21:59:52 2012] Spatial fit model total counts = 365.204000, observed total counts = 365.000000
[Sun Jul 15 21:59:52 2012] Offset between fit and detection position for source 1 = 0.248328 pixels
[Sun Jul 15 21:59:52 2012] 351.599000 total counts/ 244.508000 bgd. counts: snr = 6.848673
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.248328 pixels
  Position = (287.8, 299.8) = 10 0 13.38 -19 36 35.8
  Extent = 5.4 (4.4-6.2)", rotation angle = 0
  Source counts = 107.1 +/- 18.8
  Background counts = 244.5
  Rate = 0.005 +/- 0.0009
[Sun Jul 15 21:59:52 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 21:59:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 21:59:52 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 21:59:52 2012] Source does appear to be extended
[Sun Jul 15 21:59:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 23:07:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 23:07:47 2012] Initial guess for spatial extent in simple fitting = 5.40"
[Sun Jul 15 23:07:47 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.319
[Sun Jul 15 23:07:47 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.40"
[Sun Jul 15 23:43:18 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jul 15 23:43:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_src4.csv
[Sun Jul 15 23:43:18 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jul 15 23:43:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_src4.csv
[Sun Jul 15 23:43:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 23:43:18 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jul 15 23:43:18 2012] fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jul 15 23:43:18 2012] Fit fullrun_mos2_xmm0041180301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Jul 15 23:43:28 2012] Spatial fit model total counts = 364.249000, observed total counts = 365.000000
[Sun Jul 15 23:43:28 2012] Offset between fit and detection position for source 1 = 0.019685 pixels
[Sun Jul 15 23:43:28 2012] 353.575000 total counts/ 246.902000 bgd. counts: snr = 6.788787
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.019685 pixels
  Position = (287.8, 299.8) = 10 0 13.37 -19 36 35.9
  Extent = 5.4 (4.4-6.2)", rotation angle = 0
  Source counts = 106.7 +/- 18.8
  Background counts = 246.9
  Rate = 0.005 +/- 0.0009
[Sun Jul 15 23:43:28 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 23:43:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 23:43:28 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 23:43:28 2012] Source does appear to be extended
[Sun Jul 15 23:43:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 00:56:28 2012] XMMSAS src. selection expression = ellipse(24990.407560, 26031.786400, 322.323609, 322.323609, 0.000000, X, Y)
[Mon Jul 16 00:56:28 2012] Writing source region out to fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 16 00:56:28 2012] Extracting stamp from image fullrun_mos2_xmm0041180301_pi300-10000_cl_sm2.00.img.gz, (269, 281) - (306, 318)
[Mon Jul 16 00:56:28 2012] XMMSAS bgd. selection expression = annulus(24990.407560, 26031.786400, 537.206015, 1074.412031, X, Y) && !ellipse(24883.382690, 24240.910736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25529.603546, 24373.856018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23816.156494, 24499.019409, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(24522.014618, 25448.064941, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 00:56:28 2012] Writing fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src1.gif
[Mon Jul 16 00:57:07 2012] Mean detx,y = (340.77, -2032.47) 
[Mon Jul 16 00:57:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 00:57:16 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 00:57:16 2012] Setting source spectrum file to fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 16 00:57:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 16 01:08:05 2012] Updating aperture counts using extracted products
[Mon Jul 16 01:08:05 2012] Error reading totcts from fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 16 01:08:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 01:08:06 2012] Using photon index=1.80, rate=0.00505, arf fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src1.arf
[Mon Jul 16 01:08:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 01:08:06 2012] Updating source flux to 6.9e-14
[Mon Jul 16 01:10:01 2012] Reading fit data from xmm0041180301/analysis//spectral/fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 16 01:10:01 2012] Spectral fit parameter nH value = 1.87497e+21
[Mon Jul 16 01:10:01 2012] Spectral fit parameter PhoIndex value = 1.93319
[Mon Jul 16 01:10:01 2012] Failed to get F(0.3-8.0) from xmm0041180301/analysis//spectral/fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 16 01:10:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 01:10:01 2012] Using Nh = 1.9e+21, photon index=1.93, rate=0.00505, arf fullrun_mos2_xmm0041180301_pi300-10000_pass1_cl_src1.arf
[Mon Jul 16 01:10:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 01:10:01 2012] Updating source flux to 7.5e-14