[Sun Jul 15 20:16:12 2012] Detection parameters:
  Position = (283.2, 263.5) = 10 0 14.78 -19 39 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.2 +/- 10.3
  Background counts = 13.9
  Rate = 0.002 +/- 0.0005

[Sun Jul 15 20:16:12 2012] Off-axis axis estimate = 2.76'
[Sun Jul 15 20:44:42 2012] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 20:44:42 2012] Initial guess for spatial extent in simple fitting = 7.81"
[Sun Jul 15 20:44:42 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.186
[Sun Jul 15 20:44:42 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.81"
[Sun Jul 15 21:21:00 2012] fullrun_mos1_xmm0041180301_pi300-10000_cl_pass0_src17.ximg exists
[Sun Jul 15 21:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041180301_pi300-10000_cl_pass0_src17.csv
[Sun Jul 15 21:21:00 2012] fullrun_mos1_xmm0041180301_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Jul 15 21:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041180301_pi300-10000_cl_pass0_src17.csv
[Sun Jul 15 21:21:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041180301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041180301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 21:21:01 2012] fullrun_mos1_xmm0041180301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Jul 15 21:21:01 2012] fullrun_mos1_xmm0041180301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Jul 15 21:21:01 2012] Fit fullrun_mos1_xmm0041180301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Jul 15 21:59:48 2012] Warning, spatial fit 17 centroid is now closest to src. 16
[Sun Jul 15 21:59:48 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 21:59:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 21:59:48 2012] Assessing source extent using major
[Sun Jul 15 21:59:48 2012] Source does appear to be extended
[Sun Jul 15 21:59:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 21:59:48 2012] Source is confused with source 16
[Sun Jul 15 22:18:36 2012] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 22:18:36 2012] Initial guess for spatial extent in simple fitting = 7.81"
[Sun Jul 15 22:18:36 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.186
[Sun Jul 15 22:18:36 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.81"
[Sun Jul 15 23:07:47 2012] fullrun_mos1_xmm0041180301_pi300-10000_cl_pass1_src15.ximg exists
[Sun Jul 15 23:07:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041180301_pi300-10000_cl_pass1_src15.csv
[Sun Jul 15 23:07:47 2012] fullrun_mos1_xmm0041180301_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Jul 15 23:07:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0041180301_pi300-10000_cl_pass1_src15.csv
[Sun Jul 15 23:07:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041180301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041180301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 23:07:47 2012] fullrun_mos1_xmm0041180301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Jul 15 23:07:47 2012] fullrun_mos1_xmm0041180301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Jul 15 23:07:47 2012] Fit fullrun_mos1_xmm0041180301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Jul 15 23:43:25 2012] Source 18 is offset by 7.408916 and 6.395886 pixels which is larger than
2 X fitted extent = 7.182483 x 7.182483, not incorporating fit results
[Sun Jul 15 23:43:25 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 23:43:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 23:43:25 2012] Assessing source extent using major
[Sun Jul 15 23:43:25 2012] Source does appear to be extended
[Sun Jul 15 23:43:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 00:27:13 2012] XMMSAS src. selection expression = ellipse(24592.197662, 22873.082123, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 16 00:27:13 2012] Writing source region out to fullrun_mos1_xmm0041180301_pi300-10000_pass1_cl_src18_src.reg
[Mon Jul 16 00:27:13 2012] Extracting stamp from image fullrun_mos1_xmm0041180301_pi300-10000_cl_sm2.00.img.gz, (246, 226) - (321, 301)
[Mon Jul 16 00:27:13 2012] XMMSAS bgd. selection expression = annulus(24592.197662, 22873.082123, 1087.500000, 2175.000000, X, Y) && !ellipse(24748.003800, 24101.362800, 915.480026, 915.480026, 0.000000, X, Y) && !ellipse(25428.596000, 24729.404000, 1078.192031, 1078.192031, 0.000000, X, Y) && !ellipse(24649.441600, 23544.378000, 1249.752036, 1249.752036, 0.000000, X, Y) && !ellipse(24734.700000, 24071.922000, 1071.496031, 1071.496031, 0.000000, X, Y) && !ellipse(24976.189240, 25424.966187, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 00:27:13 2012] Writing fullrun_mos1_xmm0041180301_pi300-10000_pass1_cl_src18.gif
[Mon Jul 16 00:30:44 2012] Mean detx,y = (869.22, 859.66) 
[Mon Jul 16 00:30:45 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 00:30:54 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 00:30:54 2012] Setting source spectrum file to fullrun_mos1_xmm0041180301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Jul 16 00:30:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0041180301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Jul 16 00:56:02 2012] Not generating rmf since there are only 44 counts
[Mon Jul 16 00:56:02 2012] rmf not generated due to insufficient counts
[Mon Jul 16 01:08:05 2012] Updating aperture counts using extracted products
[Mon Jul 16 01:08:05 2012] Error reading totcts from fullrun_mos1_xmm0041180301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Jul 16 01:08:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 01:08:05 2012] Using photon index=1.80, rate=0.00213, arf fullrun_mos1_xmm0041180301_pi300-10000_pass1_cl_src18.arf
[Mon Jul 16 01:08:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 01:08:05 2012] Updating source flux to 2.1e-14
[Mon Jul 16 01:08:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting