[Tue May 29 09:28:37 2012] Detection parameters: Position = (201.0, 213.2) = 10 1 10.36 25 9 50.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 55.5 +/- 11.2 Background counts = 22.3 Rate = 0.002 +/- 0.0004 [Tue May 29 09:28:37 2012] Off-axis axis estimate = 9.38' [Tue May 29 11:18:12 2012] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting [Tue May 29 11:18:12 2012] Initial guess for spatial extent in simple fitting = 11.12" [Tue May 29 11:18:12 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.964 [Tue May 29 11:18:12 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 11.12" [Tue May 29 12:04:30 2012] fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_src21.ximg exists [Tue May 29 12:04:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_src21.csv [Tue May 29 12:04:30 2012] fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_src21_1.ximg exists [Tue May 29 12:04:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_src21.csv [Tue May 29 12:04:30 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_src21_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 29 12:04:30 2012] fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists [Tue May 29 12:04:30 2012] fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists [Tue May 29 12:04:30 2012] Fit fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly [Tue May 29 12:04:55 2012] Source 30 is offset by -1.306163 and -3.354570 pixels which is larger than 2 X fitted extent = 1.215807 x 1.215807, not incorporating fit results [Tue May 29 12:04:55 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 12.648005 pixels away [Tue May 29 12:04:55 2012] Warning, spatial fit 21 centroid is now closest to src. 29 [Tue May 29 12:04:55 2012] Vigneting correction estimate = 1.000000 [Tue May 29 12:04:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 29 12:04:55 2012] Assessing source extent using major [Tue May 29 12:04:55 2012] Source does appear to be extended [Tue May 29 12:04:55 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 29 14:03:02 2012] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting [Tue May 29 14:03:02 2012] Initial guess for spatial extent in simple fitting = 11.12" [Tue May 29 14:03:02 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.964 [Tue May 29 14:03:02 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 11.12" [Tue May 29 14:47:57 2012] fullrun_mos2_xmm0041170201_pi300-10000_cl_pass1_src19.ximg exists [Tue May 29 14:47:57 2012] fullrun_mos2_xmm0041170201_pi300-10000_cl_pass1_src19_1.ximg exists [Tue May 29 14:47:57 2012] Fit fullrun_mos2_xmm0041170201_pi300-10000_cl_pass1_src19 appears to have run properly [Tue May 29 14:47:57 2012] fullrun_mos2_xmm0041170201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Tue May 29 14:47:57 2012] fullrun_mos2_xmm0041170201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Tue May 29 14:47:57 2012] Fit fullrun_mos2_xmm0041170201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly [Tue May 29 14:48:18 2012] Spatial fit model total counts = 196.310000, observed total counts = 182.000000 [Tue May 29 14:48:18 2012] Offset between fit and detection position for source 30 = 0.125562 pixels [Tue May 29 14:48:18 2012] 194.938500 total counts/ 141.076000 bgd. counts: snr = 4.534819 Spatial fit parameters: Offset between fit and detection position for source 30 = 0.125562 pixels Position = (201.1, 213.2) = 10 1 10.32 25 9 49.8 Extent = 7.7" x 4.0", rotation angle = 210 Source counts = 53.9 +/- 14.0 Background counts = 141.1 Rate = 0.001 +/- 0.0003 [Tue May 29 14:48:18 2012] Vigneting correction estimate = 1.000000 [Tue May 29 14:48:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 29 14:48:18 2012] Assessing source extent using major [Tue May 29 14:48:18 2012] Source does appear to be extended [Tue May 29 14:48:18 2012] Computing asymmetry using major and minor axis, asym = 1.93 [Tue May 29 14:48:18 2012] Source is asymmetric [Tue May 29 16:37:25 2012] XMMSAS src. selection expression = ellipse(17451.462237, 18500.345737, 463.002448, 239.434794, 209.903079, X, Y) [Tue May 29 16:37:25 2012] Writing source region out to fullrun_mos2_xmm0041170201_pi300-10000_pass1_cl_src30_src.reg [Tue May 29 16:37:25 2012] Extracting stamp from image fullrun_mos2_xmm0041170201_pi300-10000_cl_sm2.00.img.gz, (175, 187) - (228, 240) [Tue May 29 16:37:25 2012] XMMSAS bgd. selection expression = annulus(17451.462237, 18500.345737, 771.670746, 1543.341492, X, Y) && !ellipse(16014.921082, 20229.339355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19186.480000, 18852.136000, 1689.872049, 1689.872049, 0.000000, X, Y) [Tue May 29 16:37:25 2012] Writing fullrun_mos2_xmm0041170201_pi300-10000_pass1_cl_src30.gif [Tue May 29 16:42:05 2012] Mean detx,y = (-9553.50, 1688.88) [Tue May 29 16:42:06 2012] Setting backscal keywords in source and bgd. spectrum [Tue May 29 16:42:15 2012] Binned source spectrum to 10 counts/bin [Tue May 29 16:42:15 2012] Setting source spectrum file to fullrun_mos2_xmm0041170201_pi300-10000_pass1_cl_src30_src_b10.pi.gz [Tue May 29 16:42:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0041170201_pi300-10000_pass1_cl_src30_bgd.pi.gz [Tue May 29 17:05:38 2012] Not generating rmf since there are only 53 counts [Tue May 29 17:05:38 2012] rmf not generated due to insufficient counts [Tue May 29 17:19:07 2012] Updating aperture counts using extracted products [Tue May 29 17:19:07 2012] Error reading totcts from fullrun_mos2_xmm0041170201_pi300-10000_pass1_cl_src30_src_b10.pi.gz [Tue May 29 17:19:07 2012] Calculating source flux in energy range 0.30-8.00 [Tue May 29 17:19:07 2012] Using photon index=1.80, rate=0.00111, arf fullrun_mos2_xmm0041170201_pi300-10000_pass1_cl_src30.arf [Tue May 29 17:19:07 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 29 17:19:07 2012] Updating source flux to 2.1e-14 [Tue May 29 17:19:39 2012] Flag b found in src. 30 procflags, skipping spectral fitting [Tue May 29 17:19:39 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting