[Tue May 29 09:28:37 2012] Detection parameters:
  Position = (218.7, 319.7) = 10 1 4.73 25 17 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.9 +/- 10.2
  Background counts = 21.2
  Rate = 0.001 +/- 0.0003

[Tue May 29 09:28:37 2012] Off-axis axis estimate = 5.98'
[Tue May 29 11:18:12 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Tue May 29 11:18:12 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Tue May 29 11:18:12 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.880
[Tue May 29 11:18:12 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.42"
[Tue May 29 12:04:30 2012] fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_src31.ximg exists
[Tue May 29 12:04:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_src31.csv
[Tue May 29 12:04:30 2012] fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue May 29 12:04:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_src31.csv
[Tue May 29 12:04:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 12:04:31 2012] fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue May 29 12:04:31 2012] fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue May 29 12:04:31 2012] Fit fullrun_mos2_xmm0041170201_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Tue May 29 12:04:55 2012] Spatial fit model total counts = 135.059000, observed total counts = 130.000000
[Tue May 29 12:04:55 2012] Offset between fit and detection position for source 17 = 4.444566 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 4.444566 pixels
  Position = (222.1, 322.4) = 10 1 3.62 25 17 45.0
  Extent = 18.8 (18.8-37.7)", rotation angle = 0
  Source counts = 123.4 +/- 11.1
  Background counts = 0.0
  Rate = 0.003 +/- 0.0002
 Deleting source due to low signal-to-noise ratio