[Tue May 29 09:28:20 2012] Detection parameters:
  Position = (232.9, 368.2) = 10 1 0.16 25 21 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 454.2 +/- 26.2
  Background counts = 19.8
  Rate = 0.02 +/- 0.0009

[Tue May 29 09:28:20 2012] Off-axis axis estimate = 6.94'
[Tue May 29 10:38:43 2012] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Tue May 29 10:38:43 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Tue May 29 10:38:43 2012] source mask rpix=2.3, npix_max = 30, mask sum = 35, frac = 1.136
[Tue May 29 10:38:43 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.90"
[Tue May 29 11:18:11 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_src2.ximg exists
[Tue May 29 11:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_src2.csv
[Tue May 29 11:18:11 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue May 29 11:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_src2.csv
[Tue May 29 11:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 11:18:11 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue May 29 11:18:11 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May 29 11:18:11 2012] Fit fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue May 29 12:04:50 2012] Spatial fit model total counts = 529.798000, observed total counts = 537.000000
[Tue May 29 12:04:50 2012] Offset between fit and detection position for source 7 = 0.302592 pixels
[Tue May 29 12:04:50 2012] 532.487000 total counts/ 224.297000 bgd. counts: snr = 20.578173
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.302592 pixels
  Position = (232.7, 368.3) = 10 1 0.25 25 21 4.7
  Extent = 5.5 (5.0-6.1)", rotation angle = 0
  Source counts = 308.2 +/- 23.1
  Background counts = 224.3
  Rate = 0.006 +/- 0.0005
[Tue May 29 12:04:50 2012] Vigneting correction estimate = 1.000000
[Tue May 29 12:04:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 12:04:50 2012] Assessing source extent using major axis lower bound
[Tue May 29 12:04:50 2012] Source does appear to be extended
[Tue May 29 12:04:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 13:24:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 13:24:29 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Tue May 29 13:24:29 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.716
[Tue May 29 13:24:29 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.54"
[Tue May 29 14:03:02 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_src2.ximg exists
[Tue May 29 14:03:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_src2.csv
[Tue May 29 14:03:02 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue May 29 14:03:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_src2.csv
[Tue May 29 14:03:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 14:03:02 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue May 29 14:03:02 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue May 29 14:03:02 2012] Fit fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue May 29 14:48:13 2012] Warning, spatial fit 2 centroid is now closest to src. 15
[Tue May 29 14:48:13 2012] Vigneting correction estimate = 1.000000
[Tue May 29 14:48:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 14:48:13 2012] Assessing source extent using major axis lower bound
[Tue May 29 14:48:13 2012] Source does appear to be extended
[Tue May 29 14:48:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 16:10:14 2012] XMMSAS src. selection expression = ellipse(20194.159800, 31995.282600, 332.255410, 332.255410, 0.000000, X, Y)
[Tue May 29 16:10:14 2012] Writing source region out to fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src7_src.reg
[Tue May 29 16:10:14 2012] Extracting stamp from image fullrun_mos1_xmm0041170201_pi300-10000_cl_sm2.00.img.gz, (214, 349) - (252, 387)
[Tue May 29 16:10:14 2012] XMMSAS bgd. selection expression = annulus(20194.159800, 31995.282600, 553.759016, 1107.518032, X, Y)
[Tue May 29 16:10:14 2012] Writing fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src7.gif
[Tue May 29 16:10:35 2012] Mean detx,y = (-9301.81, 1343.87) 
[Tue May 29 16:10:36 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 16:10:44 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 16:10:44 2012] Setting source spectrum file to fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue May 29 16:10:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue May 29 17:19:06 2012] Updating aperture counts using extracted products
[Tue May 29 17:19:06 2012] Error reading totcts from fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue May 29 17:19:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 17:19:06 2012] Using photon index=1.80, rate=0.00638, arf fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src7.arf
[Tue May 29 17:19:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 17:19:06 2012] Updating source flux to 1.3e-13
[Tue May 29 17:19:39 2012] Reading fit data from xmm0041170201/analysis//spectral/fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src7_pl.csv
[Tue May 29 17:19:39 2012] Spectral fit parameter nH value = 3.79562e+20
[Tue May 29 17:19:39 2012] Spectral fit parameter PhoIndex value = 2.37707
[Tue May 29 17:19:39 2012] Failed to get F(0.3-8.0) from xmm0041170201/analysis//spectral/fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Tue May 29 17:19:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 17:19:39 2012] Using Nh = 3.8e+20, photon index=2.38, rate=0.00638, arf fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src7.arf
[Tue May 29 17:19:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 17:19:39 2012] Updating source flux to 1.1e-13