[Tue May 29 09:28:20 2012] Detection parameters:
  Position = (336.6, 242.2) = 10 0 26.91 25 12 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.6 +/- 13.1
  Background counts = 22.0
  Rate = 0.002 +/- 0.0004

[Tue May 29 09:28:20 2012] Off-axis axis estimate = 4.93'
[Tue May 29 10:38:43 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Tue May 29 10:38:43 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Tue May 29 10:38:43 2012] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.734
[Tue May 29 10:38:43 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.89"
[Tue May 29 11:18:11 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_src13.ximg exists
[Tue May 29 11:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_src13.csv
[Tue May 29 11:18:11 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue May 29 11:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_src13.csv
[Tue May 29 11:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 11:18:11 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue May 29 11:18:11 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue May 29 11:18:11 2012] Fit fullrun_mos1_xmm0041170201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue May 29 12:04:50 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 11.023343 pixels away
[Tue May 29 12:04:50 2012] Vigneting correction estimate = 1.000000
[Tue May 29 12:04:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 12:04:50 2012] Assessing source extent using major
[Tue May 29 12:04:50 2012] Source does appear to be extended
[Tue May 29 12:04:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 13:24:29 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Tue May 29 13:24:29 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Tue May 29 13:24:29 2012] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.734
[Tue May 29 13:24:29 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.89"
[Tue May 29 14:03:02 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_src13.ximg exists
[Tue May 29 14:03:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_src13.csv
[Tue May 29 14:03:02 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue May 29 14:03:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_src13.csv
[Tue May 29 14:03:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 14:03:02 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue May 29 14:03:02 2012] fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue May 29 14:03:02 2012] Fit fullrun_mos1_xmm0041170201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue May 29 14:48:13 2012] Spatial fit model total counts = 170.999000, observed total counts = 184.000000
[Tue May 29 14:48:13 2012] Offset between fit and detection position for source 24 = 1.063111 pixels
[Tue May 29 14:48:13 2012] 168.907600 total counts/ 133.925000 bgd. counts: snr = 3.022882
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 1.063111 pixels
  Position = (337.5, 242.9) = 10 0 26.64 25 11 59.0
  Extent = 5.0 (3.4-7.8)", rotation angle = 0
  Source counts = 35.0 +/- 13.0
  Background counts = 133.9
  Rate = 0.0007 +/- 0.0003
[Tue May 29 14:48:13 2012] Vigneting correction estimate = 1.000000
[Tue May 29 14:48:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 14:48:13 2012] Assessing source extent using major axis lower bound
[Tue May 29 14:48:13 2012] Source does appear to be extended
[Tue May 29 14:48:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 16:10:14 2012] XMMSAS src. selection expression = ellipse(29312.445000, 21079.926580, 302.073009, 302.073009, 0.000000, X, Y)
[Tue May 29 16:10:14 2012] Writing source region out to fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src24_src.reg
[Tue May 29 16:10:14 2012] Extracting stamp from image fullrun_mos1_xmm0041170201_pi300-10000_cl_sm2.00.img.gz, (320, 225) - (355, 260)
[Tue May 29 16:10:14 2012] XMMSAS bgd. selection expression = annulus(29312.445000, 21079.926580, 503.455014, 1006.910029, X, Y)
[Tue May 29 16:10:14 2012] Writing fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src24.gif
[Tue May 29 16:14:07 2012] Mean detx,y = (4390.78, -2463.19) 
[Tue May 29 16:14:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 16:14:16 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 16:14:16 2012] Setting source spectrum file to fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue May 29 16:14:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Tue May 29 16:35:54 2012] Not generating rmf since there are only 34 counts
[Tue May 29 16:35:54 2012] rmf not generated due to insufficient counts
[Tue May 29 17:19:06 2012] Updating aperture counts using extracted products
[Tue May 29 17:19:06 2012] Error reading totcts from fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue May 29 17:19:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 17:19:06 2012] Using photon index=1.80, rate=0.000725, arf fullrun_mos1_xmm0041170201_pi300-10000_pass1_cl_src24.arf
[Tue May 29 17:19:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 17:19:06 2012] Updating source flux to 1.2e-14
[Tue May 29 17:19:09 2012] Source 24 has fewer than 100.000000 counts, skipping spectral fitting