[Wed Jun 19 06:21:13 2013] Detection parameters:
  Position = (357.5, 215.9) = 3 2 26.46 0 0 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 223.8 +/- 19.2
  Background counts = 30.8
  Rate = 0.009 +/- 0.0008

[Wed Jun 19 06:21:13 2013] Off-axis axis estimate = 7.36'
[Wed Jun 19 06:23:58 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 06:23:58 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Wed Jun 19 06:23:58 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.941
[Wed Jun 19 06:23:58 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 10.11"
[Wed Jun 19 07:53:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src46.ximg exists
[Wed Jun 19 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src46.csv
[Wed Jun 19 07:53:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src46_1.ximg exists
[Wed Jun 19 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src46.csv
[Wed Jun 19 07:53:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:53:52 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Wed Jun 19 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Wed Jun 19 07:53:52 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Wed Jun 19 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Wed Jun 19 07:53:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:31 2013] Source 48 is offset by -1.583923 and -0.233319 pixels which is larger than
2 X fitted extent = 1.173315 x 3.211798, not incorporating fit results
[Wed Jun 19 10:00:31 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 13.471227 pixels away
[Wed Jun 19 10:00:32 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:00:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:00:32 2013] Assessing source extent using major
[Wed Jun 19 10:00:32 2013] Source does appear to be extended
[Wed Jun 19 10:00:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 10:00:59 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 10:00:59 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Wed Jun 19 10:00:59 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.941
[Wed Jun 19 10:00:59 2013] Giving source the simple spatial ID 45 for pass 1, mean size = 10.11"
[Wed Jun 19 11:21:50 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src45.ximg exists
[Wed Jun 19 11:21:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src45.csv
[Wed Jun 19 11:21:50 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src45_1.ximg exists
[Wed Jun 19 11:21:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src45.csv
[Wed Jun 19 11:21:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 11:21:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Wed Jun 19 11:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src45.csv
[Wed Jun 19 11:21:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Wed Jun 19 11:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src45.csv
[Wed Jun 19 11:21:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 13:19:10 2013] Source 48 is offset by -1.583923 and -0.263549 pixels which is larger than
2 X fitted extent = 1.173315 x 3.159743, not incorporating fit results
[Wed Jun 19 13:19:10 2013] Spatial fit model total counts = 596.360000, observed total counts = 518.000000
[Wed Jun 19 13:19:10 2013] Poor agreement between spatial fit and data for source 48
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 13:19:10 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 13:19:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 13:19:10 2013] Assessing source extent using major
[Wed Jun 19 13:19:10 2013] Source does appear to be extended
[Wed Jun 19 13:19:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 13:19:38 2013] XMMSAS src. selection expression = ellipse(31056.572723, 18736.821274, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 13:19:38 2013] Writing source region out to fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src48_src.reg
[Wed Jun 19 13:19:38 2013] Extracting stamp from image fullrun_pn_xmm0041170101_pi300-10000_cl_sm2.00.img.gz, (320, 178) - (395, 253)
[Wed Jun 19 13:19:38 2013] XMMSAS bgd. selection expression = annulus(31056.572723, 18736.821274, 1087.500000, 2175.000000, X, Y) && !ellipse(32082.276917, 19264.222931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28525.575775, 19457.871475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32732.379980, 19094.668400, 446.627213, 446.627213, 0.000000, X, Y)
[Wed Jun 19 13:19:38 2013] Writing fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src48.gif
[Wed Jun 19 13:43:59 2013] Mean detx,y = (5432.55, 7500.37) 
[Wed Jun 19 13:44:01 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 13:44:17 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 13:44:17 2013] Setting source spectrum file to fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Wed Jun 19 13:44:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Wed Jun 19 14:11:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 14:11:21 2013] rmf not generated due to insufficient counts
[Wed Jun 19 15:12:12 2013] Updating aperture counts using extracted products
[Wed Jun 19 15:12:12 2013] Total counts from fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 337.00
[Wed Jun 19 15:12:12 2013] Total counts from fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src48_bgd.pi.gz = 1193.00
[Wed Jun 19 15:12:12 2013] Got source and background scale factors 1109022.000000, 8164437.000000
[Wed Jun 19 15:12:12 2013] User source parameters:
  Position = (357.5, 215.9) = 3 2 26.46 0 0 30.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 174.9 +/- 19.4
  Background aperture counts = 162.1
  Rate = 0.004 +/- 0.0004

[Wed Jun 19 15:12:12 2013] Updating counts from extracted products
[Wed Jun 19 15:12:12 2013] Set source signif. to 174.95/12.73 = 13.74
[Wed Jun 19 15:12:13 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 15:12:13 2013] Using photon index=1.80, rate=0.00404, arf fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src48.arf
[Wed Jun 19 15:12:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 15:12:13 2013] Updating source flux to 1.9e-14
[Wed Jun 19 15:12:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 15:12:38 2013] xmm0041170101/analysis//spectral/fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete