[Wed Jun 19 06:21:13 2013] Detection parameters:
  Position = (413.8, 257.2) = 3 2 10.15 0 3 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.9 +/- 14.7
  Background counts = 30.5
  Rate = 0.004 +/- 0.0006

[Wed Jun 19 06:21:13 2013] Off-axis axis estimate = 8.88'
[Wed Jun 19 06:23:58 2013] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 06:23:58 2013] Initial guess for spatial extent in simple fitting = 10.87"
[Wed Jun 19 06:23:58 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Wed Jun 19 06:23:58 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 10.87"
[Wed Jun 19 07:53:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src38.ximg exists
[Wed Jun 19 07:53:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed Jun 19 07:53:51 2013] Fit fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src38 appears to have run properly
[Wed Jun 19 07:53:52 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed Jun 19 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed Jun 19 07:53:52 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed Jun 19 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed Jun 19 07:53:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:31 2013] Spatial fit model total counts = 443.360000, observed total counts = 402.000000
[Wed Jun 19 10:00:31 2013] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 10:00:32 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:00:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:00:32 2013] Assessing source extent using major
[Wed Jun 19 10:00:32 2013] Source does appear to be extended
[Wed Jun 19 10:00:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 10:00:59 2013] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 10:00:59 2013] Initial guess for spatial extent in simple fitting = 10.87"
[Wed Jun 19 10:00:59 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Wed Jun 19 10:00:59 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 10.87"
[Wed Jun 19 11:21:50 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src37.ximg exists
[Wed Jun 19 11:21:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src37.csv
[Wed Jun 19 11:21:50 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src37_1.ximg exists
[Wed Jun 19 11:21:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src37.csv
[Wed Jun 19 11:21:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 11:21:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Wed Jun 19 11:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Wed Jun 19 11:21:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Wed Jun 19 11:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Wed Jun 19 11:21:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 13:19:10 2013] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 13.008658 pixels away
[Wed Jun 19 13:19:10 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 13:19:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 13:19:10 2013] Assessing source extent using major
[Wed Jun 19 13:19:10 2013] Source does appear to be extended
[Wed Jun 19 13:19:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 13:19:38 2013] XMMSAS src. selection expression = ellipse(35949.589935, 22326.100952, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 13:19:38 2013] Writing source region out to fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src40_src.reg
[Wed Jun 19 13:19:38 2013] Extracting stamp from image fullrun_pn_xmm0041170101_pi300-10000_cl_sm2.00.img.gz, (376, 220) - (451, 295)
[Wed Jun 19 13:19:38 2013] XMMSAS bgd. selection expression = annulus(35949.589935, 22326.100952, 1087.500000, 2175.000000, X, Y) && !ellipse(38845.889709, 22741.570557, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 13:19:38 2013] Writing fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src40.gif
[Wed Jun 19 13:40:30 2013] Mean detx,y = (9497.40, 3034.65) 
[Wed Jun 19 13:40:33 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 13:40:52 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 13:40:53 2013] Setting source spectrum file to fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed Jun 19 13:40:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Wed Jun 19 14:03:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 14:03:08 2013] rmf not generated due to insufficient counts
[Wed Jun 19 15:12:11 2013] Updating aperture counts using extracted products
[Wed Jun 19 15:12:11 2013] Total counts from fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 247.00
[Wed Jun 19 15:12:11 2013] Total counts from fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src40_bgd.pi.gz = 1261.00
[Wed Jun 19 15:12:11 2013] Got source and background scale factors 1329600.000000, 9523013.000000
[Wed Jun 19 15:12:11 2013] User source parameters:
  Position = (413.8, 257.2) = 3 2 10.15 0 3 30.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 70.9 +/- 16.7
  Background aperture counts = 176.1
  Rate = 0.002 +/- 0.0004

[Wed Jun 19 15:12:11 2013] Updating counts from extracted products
[Wed Jun 19 15:12:11 2013] Set source signif. to 70.94/13.27 = 5.35
[Wed Jun 19 15:12:13 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 15:12:13 2013] Using photon index=1.80, rate=0.00164, arf fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src40.arf
[Wed Jun 19 15:12:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 15:12:13 2013] Updating source flux to 7.6e-15
[Wed Jun 19 15:12:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 15:12:38 2013] xmm0041170101/analysis//spectral/fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete