[Wed Jun 19 06:21:12 2013] Detection parameters:
  Position = (339.7, 363.9) = 3 2 31.62 0 11 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.3 +/- 15.5
  Background counts = 29.7
  Rate = 0.004 +/- 0.0005

[Wed Jun 19 06:21:13 2013] Off-axis axis estimate = 5.61'
[Wed Jun 19 06:23:58 2013] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 06:23:58 2013] Initial guess for spatial extent in simple fitting = 9.23"
[Wed Jun 19 06:23:58 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.090
[Wed Jun 19 06:23:58 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 9.23"
[Wed Jun 19 07:53:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src21.ximg exists
[Wed Jun 19 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src21.csv
[Wed Jun 19 07:53:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Jun 19 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src21.csv
[Wed Jun 19 07:53:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:53:52 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Jun 19 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Wed Jun 19 07:53:52 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Jun 19 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Wed Jun 19 07:53:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:31 2013] Source 21 is offset by 8.058234 and 0.687612 pixels which is larger than
2 X fitted extent = 1.313090 x 1.313090, not incorporating fit results
[Wed Jun 19 10:00:32 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:00:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:00:32 2013] Assessing source extent using major
[Wed Jun 19 10:00:32 2013] Source does appear to be extended
[Wed Jun 19 10:00:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 10:00:59 2013] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 10:00:59 2013] Initial guess for spatial extent in simple fitting = 9.23"
[Wed Jun 19 10:00:59 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.090
[Wed Jun 19 10:00:59 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 9.23"
[Wed Jun 19 11:21:50 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src20.ximg exists
[Wed Jun 19 11:21:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src20.csv
[Wed Jun 19 11:21:50 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Jun 19 11:21:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src20.csv
[Wed Jun 19 11:21:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 11:21:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Jun 19 11:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Jun 19 11:21:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Jun 19 11:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Jun 19 11:21:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 13:19:10 2013] Source 21 is offset by 7.687453 and -4.913673 pixels which is larger than
2 X fitted extent = 1.074083 x 1.074083, not incorporating fit results
[Wed Jun 19 13:19:10 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 13:19:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 13:19:10 2013] Assessing source extent using major
[Wed Jun 19 13:19:10 2013] Source does appear to be extended
[Wed Jun 19 13:19:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 13:19:38 2013] XMMSAS src. selection expression = ellipse(29508.138397, 31609.960480, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 13:19:38 2013] Writing source region out to fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src21_src.reg
[Wed Jun 19 13:19:38 2013] Extracting stamp from image fullrun_pn_xmm0041170101_pi300-10000_cl_sm2.00.img.gz, (302, 326) - (377, 401)
[Wed Jun 19 13:19:38 2013] XMMSAS bgd. selection expression = annulus(29508.138397, 31609.960480, 1087.500000, 2175.000000, X, Y) && !ellipse(29062.231537, 34343.690155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29057.290527, 29531.632751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28156.149689, 29623.982635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30177.131439, 29390.932129, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 13:19:38 2013] Writing fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src21.gif
[Wed Jun 19 13:30:42 2013] Mean detx,y = (1353.68, -4787.08) 
[Wed Jun 19 13:30:45 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 13:31:04 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 13:31:05 2013] Setting source spectrum file to fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Jun 19 13:31:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Jun 19 13:53:29 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 13:53:29 2013] rmf not generated due to insufficient counts
[Wed Jun 19 15:12:07 2013] Updating aperture counts using extracted products
[Wed Jun 19 15:12:07 2013] Total counts from fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 288.00
[Wed Jun 19 15:12:07 2013] Total counts from fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 994.00
[Wed Jun 19 15:12:07 2013] Got source and background scale factors 1318332.000000, 7896413.000000
[Wed Jun 19 15:12:07 2013] User source parameters:
  Position = (339.7, 363.9) = 3 2 31.62 0 11 15.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 122.0 +/- 18.0
  Background aperture counts = 166.0
  Rate = 0.003 +/- 0.0004

[Wed Jun 19 15:12:07 2013] Updating counts from extracted products
[Wed Jun 19 15:12:07 2013] Set source signif. to 122.05/12.88 = 9.47
[Wed Jun 19 15:12:13 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 15:12:13 2013] Using photon index=1.80, rate=0.00282, arf fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src21.arf
[Wed Jun 19 15:12:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 15:12:13 2013] Updating source flux to 1e-14
[Wed Jun 19 15:12:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 15:12:38 2013] xmm0041170101/analysis//spectral/fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete