[Wed Jun 19 06:21:12 2013] Detection parameters:
  Position = (425.6, 401.6) = 3 2 6.72 0 13 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.0 +/- 14.0
  Background counts = 28.6
  Rate = 0.002 +/- 0.0003

[Wed Jun 19 06:21:13 2013] Off-axis axis estimate = 11.87'
[Wed Jun 19 06:23:58 2013] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 06:23:58 2013] Initial guess for spatial extent in simple fitting = 12.36"
[Wed Jun 19 06:23:58 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.097
[Wed Jun 19 06:23:58 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 12.36"
[Wed Jun 19 07:53:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src15.ximg exists
[Wed Jun 19 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src15.csv
[Wed Jun 19 07:53:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Jun 19 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src15.csv
[Wed Jun 19 07:53:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 07:53:52 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Jun 19 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed Jun 19 07:53:52 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Jun 19 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed Jun 19 07:53:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:31 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 13.180690 pixels away
[Wed Jun 19 10:00:31 2013] Spatial fit model total counts = 539.804000, observed total counts = 484.000000
[Wed Jun 19 10:00:31 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 10:00:32 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:00:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:00:32 2013] Assessing source extent using major
[Wed Jun 19 10:00:32 2013] Source does appear to be extended
[Wed Jun 19 10:00:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 10:00:59 2013] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 10:00:59 2013] Initial guess for spatial extent in simple fitting = 12.36"
[Wed Jun 19 10:00:59 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.097
[Wed Jun 19 10:00:59 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 12.36"
[Wed Jun 19 11:21:50 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src15.ximg exists
[Wed Jun 19 11:21:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src15.csv
[Wed Jun 19 11:21:50 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Jun 19 11:21:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src15.csv
[Wed Jun 19 11:21:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 11:21:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Jun 19 11:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed Jun 19 11:21:51 2013] fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Jun 19 11:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed Jun 19 11:21:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 13:19:10 2013] Source 15 is offset by 2.027318 and -0.072089 pixels which is larger than
2 X fitted extent = 1.384552 x 1.384552, not incorporating fit results
[Wed Jun 19 13:19:10 2013] Spatial fit model total counts = 539.805000, observed total counts = 484.000000
[Wed Jun 19 13:19:10 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 13:19:10 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 13:19:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 13:19:10 2013] Assessing source extent using major
[Wed Jun 19 13:19:10 2013] Source does appear to be extended
[Wed Jun 19 13:19:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 13:19:38 2013] XMMSAS src. selection expression = ellipse(36978.068634, 34886.404694, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 13:19:38 2013] Writing source region out to fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src15_src.reg
[Wed Jun 19 13:19:38 2013] Extracting stamp from image fullrun_pn_xmm0041170101_pi300-10000_cl_sm2.00.img.gz, (388, 364) - (463, 439)
[Wed Jun 19 13:19:38 2013] XMMSAS bgd. selection expression = annulus(36978.068634, 34886.404694, 1087.500000, 2175.000000, X, Y) && !ellipse(37727.469238, 37869.088501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35873.369354, 35001.447113, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 13:19:38 2013] Writing fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src15.gif
[Wed Jun 19 13:28:47 2013] Mean detx,y = (7980.68, -9442.98) 
[Wed Jun 19 13:28:50 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 13:29:14 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 13:29:15 2013] Setting source spectrum file to fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jun 19 13:29:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Jun 19 13:50:22 2013] Not generating rmf since there are only 99 counts
[Wed Jun 19 13:50:22 2013] rmf not generated due to insufficient counts
[Wed Jun 19 15:12:06 2013] Updating aperture counts using extracted products
[Wed Jun 19 15:12:06 2013] Total counts from fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 197.00
[Wed Jun 19 15:12:07 2013] Total counts from fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 1261.00
[Wed Jun 19 15:12:07 2013] Got source and background scale factors 1208972.000000, 9158988.000000
[Wed Jun 19 15:12:07 2013] User source parameters:
  Position = (425.6, 401.6) = 3 2 6.72 0 13 58.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 30.5 +/- 15.1
  Background aperture counts = 166.5
  Rate = 0.0007 +/- 0.0003

[Wed Jun 19 15:12:07 2013] Updating counts from extracted products
[Wed Jun 19 15:12:07 2013] Set source signif. to 30.55/12.90 = 2.37
[Wed Jun 19 15:12:13 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 15:12:13 2013] Using photon index=1.80, rate=0.000706, arf fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src15.arf
[Wed Jun 19 15:12:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 15:12:13 2013] Updating source flux to 4.3e-15
[Wed Jun 19 15:12:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 15:12:38 2013] xmm0041170101/analysis//spectral/fullrun_pn_xmm0041170101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete