[Wed Jun 19 06:22:10 2013] Detection parameters:
  Position = (334.2, 394.9) = 3 2 33.24 0 13 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.6 +/- 17.2
  Background counts = 17.2
  Rate = 0.003 +/- 0.0003

[Wed Jun 19 06:22:11 2013] Off-axis axis estimate = 7.46'
[Wed Jun 19 08:58:28 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 08:58:28 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Wed Jun 19 08:58:28 2013] source mask rpix=2.3, npix_max = 32, mask sum = 26, frac = 0.809
[Wed Jun 19 08:58:28 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.16"
[Wed Jun 19 10:00:20 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_src10.ximg exists
[Wed Jun 19 10:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_src10.csv
[Wed Jun 19 10:00:20 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Jun 19 10:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_src10.csv
[Wed Jun 19 10:00:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:21 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Jun 19 10:00:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Jun 19 10:00:21 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Jun 19 10:00:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Jun 19 10:00:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:45 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.183927 pixels away
[Wed Jun 19 10:00:45 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:00:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:00:45 2013] Assessing source extent using major
[Wed Jun 19 10:00:45 2013] Source does appear to be extended
[Wed Jun 19 10:00:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 12:19:25 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 12:19:25 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Wed Jun 19 12:19:25 2013] source mask rpix=2.3, npix_max = 32, mask sum = 26, frac = 0.809
[Wed Jun 19 12:19:25 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 10.16"
[Wed Jun 19 13:18:59 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jun 19 13:18:59 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jun 19 13:18:59 2013] Fit fullrun_mos2_xmm0041170101_pi300-10000_cl_pass1_src9 appears to have run properly
[Wed Jun 19 13:19:00 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jun 19 13:19:00 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jun 19 13:19:00 2013] Fit fullrun_mos2_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Jun 19 13:19:24 2013] Spatial fit model total counts = 216.711000, observed total counts = 208.000000
[Wed Jun 19 13:19:24 2013] Offset between fit and detection position for source 7 = 0.668355 pixels
[Wed Jun 19 13:19:24 2013] 217.535700 total counts/ 127.998000 bgd. counts: snr = 7.914151
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.668355 pixels
  Position = (334.8, 394.9) = 3 2 33.05 0 13 29.2
  Extent = 7.1 (5.9-9.0)", rotation angle = 0
  Source counts = 89.5 +/- 14.7
  Background counts = 128.0
  Rate = 0.002 +/- 0.0003
[Wed Jun 19 13:19:24 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 13:19:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 13:19:24 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 13:19:24 2013] Source does appear to be extended
[Wed Jun 19 13:19:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 14:42:39 2013] XMMSAS src. selection expression = ellipse(29081.243200, 34306.169100, 425.943012, 425.943012, 0.000000, X, Y)
[Wed Jun 19 14:42:39 2013] Writing source region out to fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src7_src.reg
[Wed Jun 19 14:42:39 2013] Extracting stamp from image fullrun_mos2_xmm0041170101_pi300-10000_cl_sm2.00.img.gz, (310, 370) - (359, 419)
[Wed Jun 19 14:42:39 2013] XMMSAS bgd. selection expression = annulus(29081.243200, 34306.169100, 709.905020, 1419.810041, X, Y)
[Wed Jun 19 14:42:39 2013] Writing fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src7.gif
[Wed Jun 19 14:45:16 2013] Mean detx,y = (-188.90, 7239.91) 
[Wed Jun 19 14:45:17 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 14:45:32 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 14:45:32 2013] Setting source spectrum file to fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jun 19 14:45:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Jun 19 15:07:47 2013] Not generating rmf since there are only 89 counts
[Wed Jun 19 15:07:47 2013] rmf not generated due to insufficient counts
[Wed Jun 19 15:12:20 2013] Updating aperture counts using extracted products
[Wed Jun 19 15:12:20 2013] Total counts from fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 132.00
[Wed Jun 19 15:12:20 2013] Total counts from fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 221.00
[Wed Jun 19 15:12:20 2013] Got source and background scale factors 451858.000000, 3655199.000000
[Wed Jun 19 15:12:20 2013] User source parameters:
  Position = (334.8, 394.9) = 3 2 33.05 0 13 29.2
  Extent = 7.1 (5.9-9.0)", rotation angle = 0
  Source aperture counts = 104.7 +/- 12.5
  Background aperture counts = 27.3
  Rate = 0.002 +/- 0.0003

[Wed Jun 19 15:12:25 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 15:12:25 2013] Using photon index=1.80, rate=0.00188, arf fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src7.arf
[Wed Jun 19 15:12:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 15:12:25 2013] Updating source flux to 4.5e-14
[Wed Jun 19 15:12:30 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 19 15:12:33 2013] xmm0041170101/analysis//spectral/fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete