[Wed Jun 19 06:22:11 2013] Detection parameters:
  Position = (382.4, 213.5) = 3 2 19.24 0 0 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.6 +/- 10.0
  Background counts = 20.9
  Rate = 0.001 +/- 0.0003

[Wed Jun 19 06:22:11 2013] Off-axis axis estimate = 8.66'
[Wed Jun 19 08:58:28 2013] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 08:58:28 2013] Initial guess for spatial extent in simple fitting = 10.76"
[Wed Jun 19 08:58:28 2013] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.848
[Wed Jun 19 08:58:28 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 10.76"
[Wed Jun 19 10:00:20 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_src28.ximg exists
[Wed Jun 19 10:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_src28.csv
[Wed Jun 19 10:00:20 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Jun 19 10:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_src28.csv
[Wed Jun 19 10:00:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:21 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Jun 19 10:00:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Jun 19 10:00:21 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Jun 19 10:00:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Jun 19 10:00:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0041170101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:45 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 11.206471 pixels away
[Wed Jun 19 10:00:45 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:00:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:00:45 2013] Assessing source extent using major
[Wed Jun 19 10:00:45 2013] Source does appear to be extended
[Wed Jun 19 10:00:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 12:19:25 2013] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 12:19:25 2013] Initial guess for spatial extent in simple fitting = 10.76"
[Wed Jun 19 12:19:25 2013] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.848
[Wed Jun 19 12:19:25 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 10.76"
[Wed Jun 19 13:18:59 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass1_src27.ximg exists
[Wed Jun 19 13:18:59 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Jun 19 13:18:59 2013] Fit fullrun_mos2_xmm0041170101_pi300-10000_cl_pass1_src27 appears to have run properly
[Wed Jun 19 13:19:00 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Jun 19 13:19:00 2013] fullrun_mos2_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Jun 19 13:19:00 2013] Fit fullrun_mos2_xmm0041170101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Wed Jun 19 13:19:24 2013] Source 39 is offset by -5.601902 and -6.536045 pixels which is larger than
2 X fitted extent = 1.244653 x 1.244653, not incorporating fit results
[Wed Jun 19 13:19:24 2013] Spatial fit model total counts = 152.723000, observed total counts = 154.000000
[Wed Jun 19 13:19:24 2013] Offset between fit and detection position for source 39 = 0.241653 pixels
[Wed Jun 19 13:19:24 2013] 152.146700 total counts/ 127.576000 bgd. counts: snr = 2.175370
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.241653 pixels
  Position = (382.6, 213.7) = 3 2 19.18 0 0 20.9
  Extent = 6.5 (3.5-11.1)", rotation angle = 341 (322-5) degrees
  Source counts = 24.6 +/- 12.3
  Background counts = 127.6
  Rate = 0.0005 +/- 0.0003
[Wed Jun 19 13:19:24 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 13:19:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 13:19:24 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 13:19:24 2013] Source does appear to be extended
[Wed Jun 19 13:19:24 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Wed Jun 19 14:42:40 2013] XMMSAS src. selection expression = ellipse(33240.326800, 18539.648000, 391.954211, 161.383205, 341.057783, X, Y)
[Wed Jun 19 14:42:40 2013] Writing source region out to fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src39_src.reg
[Wed Jun 19 14:42:40 2013] Extracting stamp from image fullrun_mos2_xmm0041170101_pi300-10000_cl_sm2.00.img.gz, (360, 191) - (405, 236)
[Wed Jun 19 14:42:40 2013] XMMSAS bgd. selection expression = annulus(33240.326800, 18539.648000, 653.257019, 1306.514038, X, Y) && !ellipse(34561.062714, 19852.169876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31089.455261, 18679.043854, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 14:42:40 2013] Writing fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src39.gif
[Wed Jun 19 14:49:41 2013] Mean detx,y = (-7469.97, -7338.51) 
[Wed Jun 19 14:49:42 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 14:49:54 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 14:49:54 2013] Setting source spectrum file to fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed Jun 19 14:49:54 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Wed Jun 19 15:09:45 2013] Not generating rmf since there are only 24 counts
[Wed Jun 19 15:09:45 2013] rmf not generated due to insufficient counts
[Wed Jun 19 15:12:23 2013] Updating aperture counts using extracted products
[Wed Jun 19 15:12:23 2013] Total counts from fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 35.00
[Wed Jun 19 15:12:23 2013] Total counts from fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src39_bgd.pi.gz = 214.00
[Wed Jun 19 15:12:23 2013] Got source and background scale factors 198400.000000, 3325541.000000
[Wed Jun 19 15:12:23 2013] User source parameters:
  Position = (382.6, 213.7) = 3 2 19.18 0 0 20.9
  Extent = 6.5 (3.5-11.1)", rotation angle = 341 (322-5) degrees
  Source aperture counts = 22.2 +/- 7.0
  Background aperture counts = 12.8
  Rate = 0.0005 +/- 0.0001

[Wed Jun 19 15:12:25 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 15:12:25 2013] Using photon index=1.80, rate=0.000515, arf fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src39.arf
[Wed Jun 19 15:12:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 15:12:25 2013] Updating source flux to 1.1e-14
[Wed Jun 19 15:12:30 2013] Flag b found in src. 39 procflags, skipping spectral fitting
[Wed Jun 19 15:12:30 2013] Source 39 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 19 15:12:33 2013] xmm0041170101/analysis//spectral/fullrun_mos2_xmm0041170101_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete